VTPMML
LATVIJAS UNIVERSITĀTES
Vides un tehnoloģisko procesu
matemātiskās modelēšanas laboratorija
LV

UK
Facebook Jaunumi Piedāvājumi Personāls Kontakti Arhīvs • meteo • klimats
Vides procesi
Tehnoloģiskie procesi
Citi
ERAF
GORWIND
TEMPUS
KALME
Aktuālie projekti
Pabeigtie projekti
Metodikas
Programmas
Mērierices
Gadi
Autori
Latvija
Ārzemes
MHD School 2019
MMP 2017
MEP 2014
OpenFOAM 2011
MMP 2010
Doktorantu kursi 2010
MEP 2008 CD
MMP 2006

Laboratorijas publikāciju saraksts pēc gadiem

2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 agrāk

37 publikācija(s): Fails
M. Ščepanskis, A. Jakovičs, I. Kaldre, W. Holweger, B. Nacke
A hypothesis on the electromagnetic cause of white etching cracks in bearing steel

Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition. - Dallas, Texas, USA, 2015
nav
M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke
A model for homogenization of solid alloying admixtures in an induction crucible furnace

Steel Research International, 2015, Vol. 86, pp. 169-174
nav
M. Scepanskis, A. Jakovics
A model for optimisation of homogenization process of solid alloying inclusions in an induction crucible furnace

Proceedings of 9-th Int. conference on clean steel – Budapest, September 2015, 9 p (electronic publication)
nav
M. Scepanskis, A. Jakovics, T. Beinerts, R. Nikoluskins, K. Thomsen, P. Vontobel
A new neutron radiography experimental technique for dynamic control of inclusions in electromagnetic induction melting and stirring equipment

Proceedings of 9-th Int. conference on clean steel – Budapest, September 2015, 7 p (electronic publication)
nav
M. Scepanskis, M. Sarma, R. Nikoluskins, K. Thomsen, A. Jakovics, P. Vontobel, T. Beinerts, A. Bojarevics, E. Platacis
A report on the first neutron radiography experiment for dynamic vizualization of solid particles in an intense liquid metal flow

Magnetohydrodynamics - 2015, Vol. 51, No. 2, pp. 257–265
nav
Sakipova, S., Jakovics, A., Gendelis, S.
Analysis of energy supply from renewable sources considering the climate in Riga

Proceedings of ECOS 2015: 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2015, Pau (France), 2015, 8 pp.
Gendelis, S., Jakovičs, A., Dzenis, T., Bandeniece, L.
Analysis of Thermal Comfort Conditions and Actual Energy Efficiency for Different Heating Systems in Test Buildings

In: Proceedings of REHVA Annual Conference 2015, Latvia, Rīga, 6-9 May, 2015. Riga: RTU PRESS, 2015, pp.89-94. ISBN 978-9934-10-685-9. e-ISBN 978-9934-10-717-7. (DOI: 10.7250/rehvaconf.2015.013)
V. Geza, B. Nacke, E.Baake, A.Jakovics
Anisotropy of flow and transition between mixing regimes in a physical model of directional solidification

Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 15–24
Vardanjan, R., Laizans, A., Jakovics, A., Gendelis, S.
Biogas specific heat capacity variations during upgrading

Engineering for Rural Development. In 14th International Scientific Conference on Engineering for Rural Development 2015 (pp. 372-376). Jelgava, Latvia: Latvia University of Agriculture.
M. Scepanskis, A. Jakovics, K. Thomsen, T. Beinerts, M. Sarma, P. Vontobel, R. Nikoluskins, A. Bojarevics
Dynamic neutron radiography for liquid metals applications

8th Int. conference on Electromagnetic processing of materials – Cannes, October 2015, p. 503 – 506.
nav
Apine, I., Orola, L., Jakovics, A.
Effect of Building Envelope Materials on Indoor Air Quality in Low Energy Test Houses

International Journal Of Environmental Science And Development, 6(12), 2015. pp. 952-957.(DOI: 10.7763/IJESD.2015.V6.728)
S. Spitans, E. Baake, A. Jakovics
Electromagnetic levitation melting of metals on a large scale: simulation and experiments

8th Int. conference on Electromagnetic processing of materials – Cannes, October 2015, p. 583 - 586.
nav
A. Jakovičs, I. Dimdiņa
Energoefektivitātes monitoringa aktualitātes eksperimentālajās būvēs

Latvijas būvniecība – 2015, Nr. 1, 96.-97. lpp.
Jakovičs, A., Gendelis, S. & Bandeniece, L.
Energy Efficiency and Sustainability of Different Building Structures in Latvian Climate

IOP Conference Series: Materials Science and Engineering, vol. 96, p. 012032, 8 pp, Nov. 2015. online
S. Gendelis, A. Jakovičs, L. Bandeniece
Experimental Research of Thermal Comfort Conditions in Small Test Buildings with Different Types of Heating

Energy Procedia, Volume 78, November 2015, Pages 2929-2934, ISSN 1876-6102
Ozoliņš, A., Jakovičs, A., Gendelis S.
Impact of Different Building Materials on Summer Comfort in Low-Energy Buildings

Latvian Journal of Physics and Technical Sciences. Volume 52, Issue 3, Pages 44–57 (doi:10.1515/lpts-2015-0017)
Pavlovs S., Jakovics A., Sushkovs V., Nacke B.
LES-study of heat transfer in the melt for metallurgical MHD devices with power supply by inductor and over electrodes

Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 67-81
nav
S. Gendelis, A. Timuhins, A. Laizans, L. Bandeniece
Mathematical Modeling of Dual Layer Shell Type Recuperation System for Biogas Dehumidification

Latvian Journal of Physics and Technical Sciences. Volume 52, Issue 6, Pages 49–60, ISSN (Online) 0868-8257, DOI: 10.1515/lpts-2015-0035
A. Jakovics, S. Gendelis, A. Laizans, D. Vardanjans
Modelling of heat exchange in counterflow shell-type system

Advanced Materials Research, Vol. 1117, pp 126-131, 2015. (doi:10.4028/www.scientific.net/AMR.1117.126)
nav
M. Scepanskis, A. Jakovics, E. Baake, B. Nacke
Molten salts cannot be used for the study of turbulent electromagnetically driven flows of liquid metal

// Metallurgical and materials transactions B – 2015, vol. 46 B, Nr. 5, p. 2015 – 2017.
nav
M. Sarma, M. Scepanskis, A. Jakovics, K. Thomsen, R. Nikoluskins, P. Vontobel, T. Beinerts, A. Bojarevics, E. Platacis
Neutron radiography visualization of solid particles in stirring liquid metal

Physics procedia – 2015, Vol. 69, pp. 457–463
nav
S. Spitans, E. Baake, A. Jakovics
New technology for electromagnetic levitation melting of metals

Applied mechanics and materials - 2015, Vol. 698, pp. 237–244
nav
S. Spitans, E. Baake, B. Nacke, A. Jakovics
New technology for large scale electromagnetic levitation melting of metals

Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 121–132
nav
S. Spitans, E. Baake, B. Nacke, A. Jakovics
Numerical modeling of free surface dynamics of melt in an alternate electromagnetic field. Part II. Conventional electromagnetic levitation

Metallurgical and materials transactions B – 2015, vol. 46 B
nav
S. Spitans, E. Baake, A. Jakovics, H. Franz
Numerical simulation of electromagnetic levitation in a cold crucible furnace

Magnetohydrodynamics - 2015, Vol. 51, No. 3, pp.567-578
nav
Jakovics A., Pavlovs S., Baake E., Steinberg T., Sushkovs V., Tatulcenkovs A.
Numerical study of gas bubbles collective dynamics in the melt influenced with magnetic field

Proceeding of the 8th International Conference on Electromagnetic Processing of Materials EPM’2015, October 12–16, 2015, Cannes, France, pp. 183–186
Pavlovs S., Jakovics A., Sushkovs V., Nacke B.
Numerical study of turbulent flow and thermal field in industrial electrotechnological devices with combined power supply

Proceeding of the 8th International Conference on Electromagnetic Processing of Materials EPM’2015, October 12–16, 2015, Cannes, France, pp. 147–150
Якович А., Гендель С., Сакипова С.Е. (A. Jakovičs, S. Gendelis, S. Sakipova)
Otsenka energoeffektivnosti ispol'zovaniya teplovykh nasosov na osnove vozobnovlyayemykh istochnikov energii (Оценка энергоэффективности использования тепловых насосов на основе возобновляемых источников энергии)

Proceedings “Chaos and structures in nonlinear systems. Theory and experiment” – 2015, Karaganda, pp. 314–319 (Материалы 9-й международной научной конференци "Хаос и структуры в нелинейных системах. Теория и эксперимент", 18-20 июня 2015 года, Караганда, стр. 314-319) (in Russian)
M. Scepanskis, E. Yu. Koroteeva, V. Geza, A. Jakovics
Simulation of liquid metal flow induced by counter-rotating permanent magnets in a rectangular crucible

Magnetohydrodynamics – 2015, Vol. 51, No. 1, pp. 37-44
nav
S. Sakipova, A. Jakovičs, S. Gendelis
Studies Energy Efficiency of the Renewable Sources use Considering Climate in Latvia

Energy Procedia, Volume 78, November 2015, Pages 1980-1984, ISSN 1876-6102
M. Ščepanskis, A. Jakovičs, I. Kaldre, W. Holweger, B. Nacke, A. M. Diederichs
The numerical model of electrothermal deformations of carbides in bearing steel as the possible cause of white etching cracks initiation

Tribology letters – 2015, Vol. 59, Nr. 2, p. 1–10
nav
J. Ratnieks, A. Jakovics, S. Gendelis
Transient Modelling of Thermal Conditions in Test Buildings Including Radiation

Energy Procedia, Volume 78, November 2015, Pages 2905-2910, ISSN 1876-6102
W. Holweger, M. Wolf, D. Merk, T. Blass, M. Goss, J. Loos, S. Barteldes, A. Jakovics
White etching crack root cause investigations

Tribology transactions – 2015, Vol. 58, pp. 59 – 69.
nav
Павлов С. (Pavlov S.)
Системы высокопроизводительных вычислений в 2014–2015 годах: обзор достижений и анализ рынков. Часть I. Серверы, компьютеры, планшетники, смартфоны. Часть II. Процессоры. Часть III. суперкомпьютеры. Часть IV. Результаты года. Часть V. Планы и прогнозы (High-performance computing systems in 2014–2015: achievements review and markets analysis. Part 1. Servers, computers, tablets, smartphones. Part 2. Processors. Part 3. Supercomputers. Part 4. Results of the year. Part 5. Plans and forecasts)

CAD/CAM/CAE Observer, 2015, № 5, с. 63–76; №6, с. 56–63; №8, с. 78–90; 2016, №1, с. 72–80; №2, с. 77–86
Павлов С. (Pavlov S.)
Системы электронного и электротехнического проектирования в 2014 году: обзор достижений и анализ рынка (Electronic Design Automation systems in 2014: achievements review and market analysis)

CAD/CAM/CAE Observer, 2015, № 3, с. 8–18
Павлов С. (Pavlov S.)
CAE-технологии в 2014 году: обзор достижений и анализ рынка. Часть I, II (CAE technologies in 2014: achievements review and market analysis. Parts 1, 2)

CAD/CAM/CAE Observer, 2015, № 4, с. 25–35; №7, с. 77–81
Суханова А., Павлов С. (Soukhanova A., Pavlov S.)
“Продукты LMS обеспечивают инновационный подход к моделированию и испытаниям сложной техники”. Интервью П.А. Тараненко (Южно-Уральский государственный университет, директор НОЦ “Экспериментальная механика”) (“LMS solutions provide the innovative approach to modelling and testing of complex technical equipment”. Interview with P.A.Taranenko (South Ural State University, director of Scientific and Educational Centre “Experimental Mechanics”))

CAD/CAM/CAE Observer, 2015, № 4, с. 6–17