VTPMML -> Publications -> Years

UNIVERSITY OF LATVIA
Laboratory for Mathematical Modelling
of Environmental and Technological Processes

News • Staff • Contacts • Archive • meteo • klimats

Research Branches

Environmental processes
Technological processes
Other

Major Projects

ERAF

GORWIND

TEMPUS
KALME

Actual Projects
Finished Projects

Products & Equipment

Methodology
Software
Equipment

Publications

Years
Authors

Collaboration Partners

In Latvia
International

Conferences & courses

MHD School 2019
MMP 2017
MEP 2014
OpenFOAM 2011
MMP 2010
PhD course 2010
MEP 2008 CD
MMP 2006

List of laboratory´s publications by year

330 publications	File
Н. А. Тихонов, М. С. Щепанский Исследование колебаний, наблюдаемых при сорбции аминокислоты на зёрнах ионита, на основе математического моделирования Вестник Московского университета. Физика. Астрономия, No. 6 (2009)
E. Baake, M. Langejuergen, M. Kirpo, A. Jakovics Analysis and optimization of the heat and mass exchange in industrial induction channel furnaces using numerical modelling Electromagnetic processing of materials – Dresden, 2009, pp. 529 – 532	no
E. Baake, M. Langejuergen, M. Kirpo, A. Jakovics Analysis of transient heat and mass transfer processes in the melt of induction channel furnaces using LES Magnetohydrodymanics – 2009, Vol. 45, Nr. 3, pp. 385 -391.	no
P. Bethers, U. Bethers, J. Seņņikovs, A. Valainis Biogēnu noteces sezonālā mainība: novērojumi un modeļi LU 67 konferences tēzes. "Klimata mainība un ūdeņi" 36. lpp., Rīga, 2009	no
V. Geza, A. Jakovics, B. Halbedel, U. Krieger Crossed EM fields driven weak conducting melt flow in an annular cylinder Magnetohydrodymanics – 2009, Vol. 45, Nr. 4, pp. 615 – 622.	no
J. Seņņikovs, U. Bethers Dažas nākotnes klimata upju noteces iezīmes LU 67 konferences tēzes. "Klimata mainība un ūdeņi" 97. lpp., Rīga, 2009	no
V. Frishfelds, A. Jakovics, B. Nacke, E. Baake Diffusion limited growth-up of channels of ICF and its influence on integral flow through channel Magnetohydrodymanics – 2009, Vol. 45, Nr. 4, pp. 639 – 646.	no
V. Geza, A. Jakovics, B. Halbedel, U. Krieger, U. Luedtke Electromagnetic processing of high-tech glasses in a spezial device – numerical investigations Information technology and electrical engineering – September 2009, Ilmenau, pp. 365 – 366.	no
U. Bethers, J. Seņņikovs, A. Timuhins Employment of regional climate models as data source for hydrological modelling Spec iss. Hydrol. Res. "Nordic Hydrology". pieņemts publicēšanai	no
U. Bethers, J. Seņņikovs Ensemble Modelling of Impact of Climate Change on runoff Regime of Latvian Rivers In Andersen, R.S., R.D. Braddock and L.T.H. Newham (eds) 18th World IMACS Congress and MODSIM 09 International Congress on Modelling and Simulation, 13-17 July, Cairns, Australia, p. 3900-3906	no
S. Spitāns, A. Aniskevičs Forecast Method for Moisture Sorption by Pultrusion Glass Fiber Reinforced Plastic Profiles Baltic Polymer Symposium – Ventspils, Latvia, 22-25 September 2009, book of abstracts: 23 p	no
A. Valainis, J. Seņņikovs, P. Bethers Hidroloģisko modeļu ansambļa lietošana upju noteces prognozēm LU 67 konferences tēzes. "Klimata mainība un ūdeņi" 100. lpp., Rīga, 2009	no
P. Bethers, J. Seņņikovs, A. Valainis Klimata mainības ietekme uz Latvijas upju noteci: reģionālā analīze LU 67 konferences tēzes. "Klimata mainība un ūdeņi" 35. lpp., Rīga, 2009	no
A. Jakovics Laboratorium für mathematische Modellierung der Umwelt- und Technologieprozesse der Universität Lettlands Elektrowärme international – 2009, Nr. 1, S. 41 - 48.	no
M. Kirpo, A. Jakovics, E. Baake, M. Langejürgen LES investigation of heat and mass exchange in channel induction furnaces Turbulence, heat and mass transfer 6 – Begell House, September 2009, Rome, pp. 1023 – 1026.	no
M. Kirpo, A. Jakovics, E. Baake, B. Nacke LES study of particle transport in turbulent recirculated liquid metal flows Magnetohydrodymanics – 2009, Vol. 45, Nr. 3, pp. 439 – 450.	no
D. Cepīte, A. Jakovics, B. Halbedel Modelling convective and radiative heat transfer in a glass melting model crucible Magnetohydrodymanics – 2009, Vol. 45, Nr. 4, pp. 609 – 614.	no
A. Umbrashko, E. Baake, A. Jakovics, D. Ciscato Numerical investigation of TiAl meeting and solidification in induction furnace with cold crucible Electromagnetic processing of materials – Dresden, 2009, pp. 517 – 520	no
N. A. Tikhonov and M. S. Shchepanskiy Oscillations Appearing during Sorption of Amino Acids on Ion-Exchanger Grains on the Basis of Mathematical Simulation Moscow University Physics Bulletin, 2009, Vol. 64, No. 6, pp. 573–578. © Allerton Press, Inc.
A. Jakovics, M. Kirpo, B. Nacke, E. Baake Particle transport in the recirculated flows under EM convection Electromagnetic processing of materials – Dresden, 2009, pp. 553 – 556	no
D. Cepite, A. Jakovics Radiation heat transfer influence on EM and natural convection of the semi-transparent glass melt Electromagnetic processing of materials – Dresden, 2009, pp. 680 – 683	no
M. Kirpo, A. Jakovics, E. Baake, M. Langejürgen Simulation of heat and mass exchange in channel induction furnaces Progress in Computational heat and mass transfers – May 2009, Guangzhou, pp. 263 - 268.	no
B. Niemann, B. Nacke, V. Geza, A. Jakovics Simulation of the 3D mass transfer of molten glasses in the inductor-crucible Electromagnetic processing of materials – Dresden, 2009, pp. 525 – 528	no
J. Seņņikovs, U. Bethers Statistical Downscaling Method of Regional Climate Model Results for Hydrological Modelling In Andersen, R.S., R.D. Braddock and L.T.H. Newham (eds) 18th World IMACS Congress and MODSIM 09 International Congress on Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand and International Association for Mathematics and Computers in Simulation, pp. 3962-3968.	no
U. Bethers, J. Seņņikovs, A. Timuhins Viļņu klimata izmaiņas prognoze Latvijas piekrastē LU 67 konferences tēzes. "Klimata mainība un ūdeņi" 38. lpp., Rīga, 2009	no
V. Geza, A. Jakovics, B. Halbedel, U. Krieger Viscous low-conducting glass melt flow in output of glass processing system caused by two independent EM field sources Electromagnetic processing of materials – Dresden, 2009, pp. 537 – 540	no
Павлов С. (Pavlov S.) Системы высокопроизводительных вычислений: достижения 2008–2009 годов (High-performance computing systems: achievements of 2008–2009 years) CAD/CAM/CAE Observer, CAD/CAM/CAE Observer, 2009, № 5, с. 81–92; № 8, с. 78-87
Павлов С., Береза Ю. (Pavlov S., Bereza Y.) К вопросу о классификации MCAE-систем (On MCAE systems classification) CAD/CAM/CAE Observer, 2009, № 1, с. 64–69; № 2, с. 58-63; № 4, с. 64–75
Павлов С. (Pavlov S.) Финансовый анализ рынка CAE-технологий в 2008 году (The financial analysis of the CAE technologies market in 2008) CAD/CAM/CAE Observer, 2009, № 4, с. 77–81; № 6, с. 22-28; № 7, с. 22-29
Павлов С. Финансовый анализ рынка CAE-технологий в 2008 году. Проект “Короли” и “капуста” на ниве моделирования в электронике CAD/CAM/CAE Observer, 2009, № 7, с. 72-79.
Павлов С., Якович А. (S. Pavlov, A. Jakovic) Multiphysics: многодисциплинарное моделирование металлургических магнитогидродинамических технологий. Эволюция моделей индукционной печи с холодным тиглем (Multidisciplinary modelling of metallurgical magnetohydrodynamic technologies. Evolution of models of induction furnaces with cold crucible) CAD/CAM/CAE Observer, 2009, № 3 (47), с. 61–69.
A Jakovics, E. Baake 5-th International scientific colloquium “Modelling for electromagnetic processing” in Hannover – Ein Rückblick Elektrowärme international - 2008, Nr. 4, pp. 269 -274	no
D. Cepite, A. Jakovics Analysis of heat transfer in structure with regular arrangement of gas cavities Latvian Journal of physics and technical sciences – 2008, vol. 45, Nr. 4, pp. 14 - 24	no
E. Baake M. Langejurgen, M. Kirpo and A. Jakovics Analysis of Transient Heat and Mass Exchange in Induction Channel Furnaces Using LES Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 63 – 67.	no
V. Frishfelds, T.S. Lundstroem, A. Jakovics Bubble motion through non-crimp fabrics during composites manufacturing Composites, part A: Applied science and manufacturing – 2008, vol. 39, Nr. 2, pp. 243 – 251	no
A. Jakovics, V. Geza, B. Halbedel Crossed EM fields driven weak conducting flow in annular cylinder Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 271 – 276	no
U. Bethers, J. Seņņikovs, A. Timuhins Dažas nākotnes klimata iezīmes LU 66 konferences tēzes. "Klimata mainība un ūdeņi", 2008	no
U. Bethers, J. Seņņikovs, A. Timuhins Employment of regional climate models as data source for hydrological modelling XXV Nordic Hydrological conference "Nordic water 2008" Reykjavik, Aug-2008	no
V. Frishfelds, A. Jakovics, B. Nacke, E. Baake Estimation of temperature difference and integral flow through channel of ICF Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 291 – 296	no
V. Geza, A. Jakovics, K. Thomsen Heat exchange and operating gas flow influence on radiation resistant pressure sensor properties Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 297 – 302	no
A. Andrušaitis, M. Kļaviņš, U. Bethers, V. Jansons, G. Spriņģe, G. Eberhards, J. Aigars, A. Ikauniece, K. Āboliņa Klimata pārmaiņas izpausmes Latvijas ūdeņos Klimata mainība un ūdeņi : Latvijas Universitātes 66. zinātniskā konference : rakstu krājums	no
V. Frishfelds, T.S. Lundstroem, A. Jakovics Lattice-gas analysis of fluid front in non–crimp fabrics Proceedings of the 19-th International symposium on transport phenomena (ISTP-19) – Reykjavik, 2008, 8 pp	no
M. Kirpo, A. Jakovics, B. Nacke, E. Baake, M. Langejuergen LES of heat and mass exchange in channel induction furnaces XVI International congress on electricity applications in modern world – Krakow, Poland, 2008, pp. 47 – 48.	no
M. Kirpo, A. Jakovics, B. Nacke, E. Baake and M. Langejurgen LES of Heat and Mass Exchange in Induction Channel Furnaces PRZEGLAD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 84 NR 11/2008, pp. 154-158.
M. Kirpo, A. Jakovics, E. Baake and B. Nacke LES Study of Particle Transport in Turbulent Recirculated Liquid Metal Flows Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 103 - 107	no
S. Gendelis, A. Jakovičs Mathematical modelling of a living-room with solar radiation source and different boundary conditions Heat & Power and Thermal Physics. Vol.1, 2008, pp.73-81. ISSN 1691-5054.
M. Kirpo Modeling of Turbulence Properties and Particle Transport in Recirculated Flows (PhD thesis) Latvijas Universitāte
D. Cepite, A. Jakovics, B. Halbedel Modelling convective and radiative heat transfer in a glass melting model crucible Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 285 – 290	no
D. Cepite, A. Jakovics, B. Halbedel, U. Krieger Modelling of EM glass convection The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) – 2008, vol. 27, Nr. 2, pp. 387 - 398	no
D. Cepite, A. Jakovics Modelling of heat transfer through a material with the elliptic cavities Scientific Proceedings of RTU. Heat&Power and thermal physics – 2008, Vol. 1, pp. 75 - 84	no
D. Cepīte, A. Jakovics, B. Halbedel Modelling the temperature homogeneity of the glass melt obtained by EM action XVI International congress on electricity applications in modern world – Krakow, Poland, 2008, pp. 63 - 64	no
D. Cepīte, A. Jakovics, B. Halbedel Modelling the temperature homogenity of glass melt obtained by EM action Przeglad elektrotechniczny – 2008, vol. 84, Nr. 11, pp. 165 – 169	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical investigations of metal flow and skull formation in cold crucible melting process Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 185 – 189	no
M. Langejürgen, M. Kirpo, A. Jakovics and E. Baake Numerical Simulation of Mass and Heat Transport in Induction Channel Furnaces Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 35 – 40.
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical studies of the melting process in the induction furnace with cold crucible The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) – 2008, vol. 27, Nr. 2, pp. 359 – 368	no
M. Kirpo, A. Jakovics, E. Baake and B. Nacke Particle transport in recirculated EM driven liquid metal flows Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 249 – 255
M. Kirpo, A. Jakovics, B. Nacke and E. Baake Particle transport in recirculated liquid metal flows COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 27(2), 2008, pp. 377-386.	no
D. Cepite, A. Jakovics, B. Halbedel, U. Krieger The contribution of radiation heat transfer in temperature distribution of EM driven semi-transparent glass melt flow Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 191 – 195	no
A. Umbrasko, E. Baake, B. Nacke, A. Jakovics Thermal and hydrodynamic analysis of the melting process in the cold crucible using 3D modelling Heat transfer research – 2008, vol. 39, Nr. 5, pp. 413 – 421	no
T.S. Lundstroem, V. Frishfelds, A. Jakovics Transport of bubbles in non-crimp fabrics during resin transfer moulding XV International conference “Mechanics of composite materials” - Riga, Latvia, 2008, pp. 171 – 172	no
A. Jakovičs Vai energoauditoriem jābūt gaišreģiem? Būvēt – 2008, Nr. 11, lpp. 50 – 53	no
A. Jakovics, V. Geza, B. Halbedel Weak conducting material melt flow in crossed EM field XVI International congress on electricity applications in modern world – Krakow, Poland, 2008, pp. 99 – 100	no
A. Jakovics, V. Geza, B. Halbedel Weak conducting material melt flow in crossed EM fields Przeglad elektrotechniczny – 2008, vol. 84, Nr. 11, pp. 175 – 179	no
T.S. Lundstroem, L.H. Gustavsson, N. Jekabsons, A. Jakovics Wetting dynamics in multiscale porous media. Porous pore-doublet model, experiment and theory AIChE Journal – 2008, vol. 54, Nr. 2, pp. 372 – 380	no
Суханов Ю., Павлов С. Биржевые котировки акций лидеров рынков CAD/CAE/PLM и HPC: влияние глобального финансового кризиса CAD/CAM/CAE Observer, 2008, № 8, с. 73.	no
Павлов С. (Pavlov S.) Системы высокопроизводительных вычислений: достижения 2007–2008 годов (High-performance computing systems: achievements of 2007–2008 years) CAD/CAM/CAE Observer, 2008, № 7, с. 81–89; № 8, с. 84–89
Павлов С. (Pavlov S.) Финансовый анализ рынка CAE-технологий в 2007 году (The financial analysis of the CAE technologies market in 2007) CAD/CAM/CAE Observer, 2008, № 5, с. 18–21; № 6, с. 18–26; № 7, с. 70–72
U. Bethers, J. Seņņikovs, A. Timuhins Aiviekstes baseina hidroloģijas matemātiskā modelēšana Klimata mainība un ūdeņi : Latvijas Universitātes 65. zinātniskā konference : rakstu krājums	no
M. Kirpo, A. Jakovics, E. Baake, B. Nacke Analysis of experimental and simulation data for the liquid metal flow in a cylindrical vessel Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 161 – 172.	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics, M. Kirpo Analysis of the effectiveness of the melting process in the cold crucible using 3D modelling Liquid metal processing and casting – Nancy, France, 2007, p. 273 – 277.	no
V. Frishfelds, A. Jakovics, S. Lundsröm Automatic recognition and analysis of scanned non-crimp fabrics for calculation of their fluid flow permeability Journal of reinforced plastics and composites – 2007, Vol. 26, Nr. 3, p. 285 - 296.	no
A. Valainis, U. Bethers, J. Seņņikovs Current measurements in nearshore area: autumn-2006 Baltic Sea Scientific conference. Rostock, 2007	no
A. Piliksere, A. Buikis Exact Analytical 3-D Steady-State Solution for Cylindrical Fin. Topics in Advanced Theoretical and Applied Mechanics Proc. of the 3rd WSEAS Int. Conf. on Applied and Theoretical Mechanics. WSEAS Press, 2007, pp. 1-6
M. Kirpo, A. Jakovičs, B. Nacke, E. Baake, M. Langejurgen Heat and Mass Transfer in a Recirculated Flow under EM Convection Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, vol. 2, pp. 380 – 389, Saint-Petersburg, Russia
V. Frishfelds, A. Jakovics, B. Nacke Influence of crust and hole formation on inductive melting of circon in inductor crucible Induction, dielectric, conduction and electromagnetic processing – Padua, 2007, pp. 167 – 172.	no
S. Gendelis, A. Jakovičs Influence of Solar Radiation and Ventilation Conditions on Heat Balance and Thermal Comfort Conditions in Living-Rooms Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, Saint-Petersburg, Russia, vol. 2, p. 634 – 643.
A. Jakovics. M. Kirpo, B. Nacke LES of particle tracking in a induction crucible 6-th international conference on multiphase flow (ICMF 2007) – Leipzig, 2007, p. 186 and 10 p. in CD	no
J. Seņņikovs, A. Timuhins Mathematical modelling for hydrological processes of Aiviekste river basin ASTRA konference. Rīga, 2007	no
S. Gendelis, A. Jakovičs Mathematical Modelling of a Living Room with Solar Radiation Source and Different Boundary Conditions Proceedings of the WSEAS Int. conference – Arcachon, France, 2007, p. 168 – 173.
U. Bethers, J. Seņņikovs Mathematical Modelling of the Hydrological Processes in the Aiviekste River Basin Climate Change in Latvia, Riga, 2007, pp. 96-119	no
D. Cepite, A. Jakovics, B. Halbedel, U. Krieger Modelling of electromagnetic glass convection with temperature-dependent properties of the melt Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 195 – 204.	no
D. Cepīte, A. Jakovics, B. Halbedel, U. Krieger Modelling of EM glass convection with temperature dependent properties of the melt Induction, dielectric, conduction and elektromagnetic processing – Padua, 2007, pp. 25 – 32.	no
D. Cepīte, A. Jakovičs, B. Halbedel, U. Krieger Modelling of the 3D Glass Melt Flow Driven by EM and Thermal Convection Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, vol. 2, pp. 112 – 121, Saint-Petersburg, Russia
A. Jakovics, D. Cepīte, B. Halbedel, U. Krieger Modelling the electromagnetically- driven stirring process of glass melt Induktive Verfahren und elektromagnetische Schmelzenbeeinflussung – Ilmenau, 2007, pp. 13.1 – 13.8.	no
D. Zablockis, V. Frishfelds, E. Blums Numerical Investigation of Thermomagnetic Convection in Heated Cylinder under the Magnetic Field of a Solenoid Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, Saint-Petersburg, Russia
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical modelling of recirculated liquid metal flows in induction furnaces with cold crucible Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 243 - 252.	no
E. Baake, A. Umbrashko, A. Jakovics Numerical simulation of turbulent flows, heat and mass transfer in metallurgical induction processes Steel research international. – 2007, vol. 78, Nr. 5, pp. 413 – 418.	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical studies of the melting process in the induction furnace with cold crucible Induction, dielectric, conduction and electromagnetic processing – Padua, 2007, pp. 277 - 284.	no
M. Kirpo, A. Jakovics, B. Nacke, E. Baake Particle transport in recirculated liquid metal flows Induction, dielectric, conduction and electromagnetic processing – Padua, 2007, pp. 153 – 160.	no
A. Jakovics Preface Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 149 – 150.	no
U. Bethers, J. Gaideliene, J. Seņņikovs Regional climate models as data source for hydrological modelling ASTRA konference. Rīga, 2007	no
M. Langenjuergen, B. Nacke, E. Baake, M. Kirpo, A. Jakovics Simulation des Wärme- und Stofftransports in Induktions-Rinnenöfen mittels Large Eddy Simulation (LES) Induktive Verfahren und elektromagnetische Schmelzenbeeinflussung – Ilmenau, 2007, pp. 11.1 – 11.8.	no
V. Frishfelds, A. Jakovics, B. Nacke Simulation of the melting process of ZrO2-SiO2 in an inductor crucible Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 213 - 220.	no
E. Baake, A. Umbrashko, B. Nacke, A. Jakovics Simulation of turbulent melt flows GAMM-Mitteilungen – Wiley-VCH, 2007, Bd. 30, Nr. 1, pp. 133 – 148.	no
U. Bethers, J. Seņņikovs, A. Timuhins, J. Gaideliene The physically-based scalable catchment and river runoff model appilcation to the Latvian rivers USGS General Assembly, Vienna, 2007	no
A. Umbrasko, E. Baake, B. Nacke, A. Jakovičs Thermal and Hydrodynamic Analysis of the Melting Process in the Cold Crucible Using 3D modeling Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, Saint-Petersburg, Russia
Павлов С. Инженерный анализ на персональном суперкомпьютере? Достижения на рынке систем высокопроизводительных вычислений CAD/CAM/CAE Observer, 2007, № 5, с. 87–96.
Павлов С. Финансовый анализ рынка CAE-технологий. Проект 'Короли' и 'капуста' на ниве инженерного анализа CAD/CAM/CAE Observer, 2007, № 3, с. 7–15.
D. Cepite, A. Jakovics, K. Repsons, B. Halbedel 2D Modelling of EM Glass Convection by Temperature Dependent Material Properties Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 161-166, ISBN 9984-783-85-5
M. Kirpo, A. Jakovics, E. Baake, B. Nacke Analysis of Experimental and Simulation Data for Liquid Metal Flow in a Cylindrical Container Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 36-41, ISBN 9984-783-85-5
Bruvere A., Buikis A. Analytical 3-D Steady-State Statement for Cylindrical Fin and some of it’s Approximate Solutions WSEAS Transactions on Heat and Mass Transfer. Vol. 1, Issue 4, 2006, pp.415-422
A. Jakovics, E. Baake Bericht vom 4-th International scientific colloquium “Modelling for material processing” Elektrowaerme international – 2006, Nr. 3, S. 184 – 187	no
V. Frishfelds, A. Jakovics, A. Muehlbauer, B. Nacke Dynamics of Incongruent Melting of ZrO2-SiO2 in Inductor Crucible Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 149-154, ISBN 9984-783-85-5
A. Timuhins, S. Gendelis, A. Jakovičs Experimental Estimation of Thermophysical Properties of Materials Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 227-232, ISBN 9984-783-85-5
M. Kirpo, A. Jakovics, E. Baake and B. Nacke LES modelling of recirculated flows in crucible furnaces Turbulence, heat and mass transfer – Dubrovnik, 2006, p. 797 – 800
A. Jakovics, M. Kirpo, B. Nacke LES modelling of turbulent structure and mass transfer processes in induction furnaces Proceedings of 51. IWK – Ilmenau, 2006, p. 457 -458. (CD - 8 p.)	no
B. Nacke, M. Kirpo, A. Jakovics LES study of flow characteristics in induction furnaces Electromagnetic processing of materials – Sendai, 2006, p. 541 – 546	no
E. Baake, A. Umbrashko, H. Behrens, A. Jakovics LES-Modelling of turbulent flows, heat and mass transfer in industrial induction applications Electromagnetic processing of materials – Sendai, 2006, p. 214 – 219	no
S. Gendelis, A. Jakovičs Mathematical Modelling of Living Room with Different Type of Heating Proceedings of the 4th WSEAS International Conference on HEAT TRANSFER, THERMAL ENGINEERING and ENVIRONMENT, Elounda, Greece, August 21-23, 2006 (pp. 248-253)
S. Gendelis, A. Jakovičs Mathematical Modelling of Living Room with Different Types of Heating and Pressure Conditions WSEAS TRANSACTIONS ON HEAT AND MASS TRANSFER Issue 3, Vol. 1, March 2006, ISSN: 1790-5044
U. Bethers, J. Sennikovs, H. Szillat, A. Timuhins, J. Virbulis Mathematical Modelling of Sintering of SiO2 Crucibles Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 123-128, ISBN 9984-783-85-5
T. Mueller, D. Dantz, W. von Ammon, J. Virbulis, U. Bethers Modeling of Morphological Changes by Surface Diffusion in Silicon Trenches ECS Trans. 2, 363 (2006)	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Modeling of the turbulent flow in induction furnaces Metallurgical and materials transaction B – 2006, vol. 37B, p. 831 – 838	no
M. Kirpo, A. Jakovics, E. Baake and B. Nacke Modeling velocity pulsations in a turbulent recirculated melt flow Magentohydrodynamics, Vol. 42, No. 2-3, 207-218, 2006
(Editors A. Jakovics, J. Virbulis) Modelling for material processing University of Latvia, Riga, 2006, 258 p.	no
U. Bethers, J. Sennikovs, A. Timuhins, J. Virbulis, D. Zablockis Modelling of Surface Diffusion in Structured Silicon Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 77-82, ISBN 9984-783-85-5
E. Baake, A. Umbrashko, A. Jakovics Modelling of the turbulent melt flow in metallurgical processes Proceedings of 51. IWK – Ilmenau, 2006, p. 461-446 (CD - 8 p.)	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical Modelling of Recirculated Liquid Metals Flows in Practical Applications Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 56-61, ISBN 9984-783-85-5
M. Nordlund, T.S. Lundstroem, V. Frishfelds, A. Jakovics Permeability network model of non-crimp fabrics Composites, part A: applied sciences and manufacturing – Vol. 37, 2006, p. 826 – 835	no
Bruvere A, Buikis A. Some Approximate Analytical Steady-State Solutions for Cylindrical Fin Proc. of the 4rd WSEAS Int. Conf. on Heat Transfer, Thermal Engineering and Environment. WSEAS Press, 2006, pp. 238-243
D. Cepīte, K. Dadzis, K. Ērglis, A. Cēbers Thermal Fluctuations of a Brownian Particle in the Force Field of an Optical Tweezers Latv.J.Physics and Technical Sci, No.2 (2006), pp. 102-110	no
S. Gendelis, A. Jakovičs Application oh Mathematical Models for the Simulation of the Thermal Comfort Conditions in a living room Proceedings of the 5th Internatonal scientific conference ”Environment, technology, resources” – Rēzekne, 2005, pp. 11 – 18
S. Gendelis, A. Jakovičs Applications of 3D mathematical models for improvement of thermal comfort conditions in living rooms Latvian Journal of Physics and Technical Sciences, 2005 No.4, pp. 40-52, ISSN 0868-8257
V. Frishfelds, S. Lundsröm, A. Jakovics Automatic recognition and analysis of scanned non-crimp fabrics for calculation of their fluid flow permeability Pattern Analysis and Application – 2005, in print	no
U. Bethers, K.-P. Holz Beach profile simulation under sediment transport at the shore-lines of Baltic Sea by neural networks and discrete models Lehrstuhl fur Bauinformatik BTU Cottbus, 2005	no
M. Kirpo, A. Jakovičs, E. Baake Characteristics of velocity pulsations in a turbulent recirculated melt flow Magnetohydrodynamics Vol. 41 (2005), No. 2, pp. 199–210
I. Javaitis, K. Ērglis, A, Jakovičs Determination of heat conductivity of materials by guarded hot plate method Proceedings of international scientific conference 'Civil Engineering '05'. Section 'Environment and Environmental Effects' - Jelgava, Latvia, 2005, pp.174 -1180., ISBN 9984-19-745-X	no
I. Javaitis, K. Erglis, A. Jakovics Determination of heat conductivity of materials by the guarded hot plate method Latvian Journal of physics and technical sciences – 2005, Nr. 4, pp. 29 – 39	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Experimental investigations and numerical modelling of the melting process in the cold crucible The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) – 2005, Vol. 24, Nr. 1 pp. 314-323
S. Gendelis, A. Jakovičs Heat transfer measurements in non-stationary conditions for building structures 14th International Conference on Thermal Engineering and Thermogrammetry (THERMO), 22-24 June, 2005, Budapest, Hungary, p. 69 (CD – 6 p.)
A. Umbrashko, E. Baake, B. Nacke, M. Kirpo, A. Jakovics Improvement of the cold crucible melting process using LES modelling Fundamental und applied MHD – Riga, 2005, vol. 2, pp. 23 – 26	no
E. Baake, A. Umbrashko, A. Jakovics LES modelling of the cold crucible melting processes Electromagnetic processing of materials (2-nd Sino-German workshop) – October 16-19, 2005	no
S. Gendelis, A. Jakovičs Mathematical modelling of airflow and temperature distribution in living rooms 14th International Conference on Thermal Engineering and Thermogrammetry (THERMO), 22-24 June, 2005, Budapest, Hungary, p. 68 (CD – 6 p.)
S. Gendelis, A. Jakovičs, I. Javaitis, K. Ērglis, K. Repsons Modelling of heat transfer, temperature and humidity distribution in building structures Proceedings of international scientific conference 'Civil Engineering '05'. Section 'Environment and Environmental Effects' - Jelgava, Latvia, 2005, pp.156 -164., ISBN 9984-19-745-X
M. Kirpo, A. Jakovics, E. Baake, B. Nacke Modelling velocity pulsations in a turbulent recirculated melt flow Fundamental und applied MHD – Riga, 2005, vol. 1, pp. 171 – 174.	no
E. Baake, A. Umbrashko, A. Jakovics Numerical modelling of metallurgical processes using LES International conference on research in elektrotechnology and applied informatics – Katowice-Krakow, 2005, pp. 91 – 98.	no
A. Jakovics, M. Kirpo, B. Nacke Particle tracing and crystallization in cold crucible furnace Liquid metals and semiconductors (COST action P17 “EPM”) – December 7-8, 2005.	no
M. Kirpo, A. Jakovics, A. Umbrashko, E. Baake, B. Nacke Simulation of low-frequency velocity oscillations in turbulent recirculated MHD flows Actual problems of induction heating (APIH-05) – St. Petersburg, 2005, pp. 145 – 152.	no
A. Jakovics, I. Javaitis, B. Nacke, E. Baake Simulation of melting process in cold and inductor crucible Fundamental und applied MHD – Riga, 2005, vol. 2, pp. 15 – 18.	no
E. Baake, A. Umbrashko, B. Nacke, A. Jakovics Simulation of turbulent melt flows GAMM Mitteilungen – 2005, 16 pp.	no
B. Nacke, T. Behrens, M. Kudryash, A. Jakovics Skull melting technology for oxides and glasses Fundamental und applied MHD – Riga, 2005, vol. 2, pp. 241 – 244.	no
Павлов С. Назад к мейнфреймам? (Нужен ли конструктору суперкомпьютер?) CAD/CAM/CAE Observer, 2005, № 6, с. 86–90.
Павлов C.И. Естествознание: деятельность, моделирование, компьютер (Тысячелетия познания и содержание образования). Экспериментальное научно-методическое и учебное пособие Рига: Insight, 2004, 288 c.
V. Frishfelds, S. Lundstroem, A. Jakovics A statistical approach to permeability of clustered fibre reinforcements Journal of composite materials – 2004, Vol. 38, Nr. 13, pp. 1137 - 1149	no
M. Nordlund, T.S. Lundström, V. Frishfelds, A. Jakovics Application of permeability network model to non-crimp fabrics FPCM-7
S. Gendelis, A. Jakovičs Complex analysis of heat losses for buildings International Conference 'Scientific Achievements for wellbeing and development of society'. Section 'Enabling environment for society wellbeing' - Rēzekne, Latvia, 2004, pp. 76 - 83., ISBN 9984-585-46-8
Pavlovs S. Dabaszinātnes: darbība, modelēšanas, dators (Izzināšanas gadu tūkstoši un mācību saturs). Eksperimentāls zinātniski metodisks un mācību līdzeklis Rīga: Insight, 2004, 288 lpp.
S. Gendelis, A. Jakovičs Ēku siltuma zudumu kompleksa analīze Enerģētika un automatizācija - 2004, Nr. 1 (26), lpp. 42-46
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Experimental investigations and numerical modelling of the melting process in the cold crucible Heating by electromagnetic sources (HES-04) – Padua, 2004, pp. 31 – 37	no
D. Cepite, C. Lotz Felter, Z. Korotkaya, G. Krulic, N. Manson, W. van der Horst, V. Kippe Increasing Production from Horizontal Oil Wells by Heating Proceedings of 18th ECMI Modelling Week, 13. - 21. August, 2004, Lappeenranta, Finland, pp. 49. - 59.	no
A. Krauze, A. Muiznieks, A. Mhlbauer, Th. Wetzel, L. Gorbunov, A. Pedchenko, J. Virbulis Numerical 2D modelling of turbulent melt flow in CZ system with dynamic magnetic fields J. Crystal Growth 266 (2004) 40-47	no
S. Gendelis, A. Jakovičs Numerical modelling of hydraulic resistance in pipes of different geometric shapes Latvian Journal of physics and technical sciences - 2004, Nr. 4, pp. 13 - 27., ISSN 0868-8257
S. Gendelis, A. Jakovičs Numerical modelling of hydraulic resistance in pipes of various shapes International Conference 'Scientific Achievements for wellbeing and development of society'. Section 'Enabling environment for society wellbeing' – Rēzekne, Latvia, 2004, pp. 84-91, ISBN 9984-585-46-8
Th. Wetzel, J. Virbulis, A. Muiznieks, W. v. Ammon, E. Tomzig, G. Raming, M. Weber Prediction of the Growth Interface Shape in Industrial 300 mm CZ Si Crystal Growth J. Crystal Growth 266 (2004)	no
A. Jakovics, V. Frishfelds, B. Nacke, T. Behrens Simulation der Schmelzdynamik von Oxiden im Induktor-Schmelztiegel Erwärmen und Schmelzen mit elektrotechnischen und alternativen Verfahren. Ilmenau, 2004, 10 S.
R. Dobulans, D. Cepite, E. Fonavs, I. Muzikante, A. Tokmakov, D. Erts, B. Polakov Studies of host-guest thin films of corona poled betaine type polar molecules by Kelvin probe technique and atomic force microscopy Macromolecular Symposia, 2004, Vol. 212, pp. 421-426.	no
V. Frishfelds, A. Jakovics, B. Nacke Study of melting dynamics of oxides in inductor crucible Heating by electromagnetic sources (HES-04) – Padua, 2004, pp. 157 – 164
V. Frishfelds, A. Jakovics, B. Nacke Two-fluid model of melting dynamics of metals in cold crucible Heating by electromagnetic sources (HES-04) – Padua, 2004, pp. 405 – 412
A. Cebers, I. Javaitis Bending of Flexible Magnetic Rods Physical Review E, Accepted, in production.	no
A. Cebers, I. Javaitis Dynamics of a Flexible Magnetic Chain in a Rotating Magnetic Field Physical Review E, 021404 (2004)	no
A. Cebers, I. Javaitis Mechanics of Elastic and Viscous Magnetic Filaments XXI International Congress of Theoretical and Applied Mechanics. Warsaw, Poland, August 15-21, 2004	no
A. Cebers, I. Javaitis Mechanics of Elastic and Viscous Magnetic Filaments XXI International Congress of Theoretical and Applied Mechanics. Warsaw, Poland, August 15-21, 2004	no
A. Cebers, I. Javaitis Physics of Flexible Magnetic Filaments Workshop “Magnetic Forces in Bio – and Nanotechnologies” Riga, September 16-18, 2004	no
Павлов С. О разработке содержания образования по естественным наукам и интегрированного курса “Естествознание” для основной и средней школы Труды научно-практической и учебно-методической конференции “Преподавание фундаментальных наук: преемственность, непрерывность, актуальность” (14–15 февраля 2003 г.) – Рига: Институт транспорта и связи, 2003, с. 48–51.
S. Gendelis, A. Jakovics Application of mathematical models in analysis of heat losses in the buildings Environment, technology and resources - Rēzekne, 2003, pp. 347 – 352	no
V. Frišfelds, A. Jakovičs, B. Nacke Augsttemperatūru oksīdu kausēšanas procesu induktortīģelī modelēšana Latvijas fizikas biedrības 8. Konferences materiāli - Jelgava, 2003, lpp. 34 - 38.	no
A. Jakovics, E. Baake Bericht vom International scientific colloquium “Modelling for electromagnetic processing” in Hannover Elektrowärme international – 2003, Nr. 2, S. 71 – 74.	no
S. Gendels, A. Jakovičs Ēku siltuma zudumu analīze, izmantojot matemātiskos modeļus IV Starptautiskā zinātniski praktiskā konference 'Vide. Tehnoloģija. Resursi' - Rēzekne, 2003., lpp. 247-352., ISBN 9984-585-68-9
E. Baake, A. Umbrashko, B. Nacke, A. Jakovics, A. Bojarevics Experimental investigations and LES modelling of the turbulent melt flow and temperature distribution in the cold crucible induction furnace Electromagnetic processing of materials - Lyon, 2003, 6 pp.	no
E. Baake, A. Umbrashko, A. Jakovics, B. Nacke Experimentelle Untersuchung und LES Modellierung der Schmelzenströmung und Temperaturverteilung im Kaltwand-Induktions-Tiegelofen 48. Int. wissenschaftliches Kolloquium TU Ilmenau, 22. - 25. September – Ilmenau, 2003, 8 S	no
I. Muzikante, D. Cepite, E. Fonavs, A. Tokmakov, D. Erts, B. Polakov Incorporated oriented polar molecules in PMMA polymeric films: characterization by Kelvin probe technique and atomic force microscopy Latv.J.Physics and Technical Sci., No.3 (2003), pp.49-55.	no
J. Kaupuzs, V. Frishfelds, A. Jakovics, B. Nacke Influence of melt flow and temperature on erosion of refractory and deposit formation in induction furnaces Modelling for electromagnetic processing - Hannover, 2003, lpp. 279 - 284.	no
A. Umbrashko, E. Baake, B. Nacke, A. Jakovics LES modelling and experimental investigation of the melt flow in induction furnaces Modelling for electromagnetic processing - Hannover, 2003, lpp. 111 - 116.	no
E. Baake, Nacke B., A. Umbrashko, A. Jakovics LES modelling of heat and mass transfer in turbulent recirculated flows Magnetohydrodynamics - 2003, Vol. 39, Nr. 3-4.
V. Frishfelds, B. Niemeyer, J. Hoehne, A. Jakovics Modeling of PAH elimination by adiabatic steam stripping and intraparticle desorption Engineering in life science - 2003, Nr. 5, pp. 226 - 232.	no
N. Jekabsons, A. Jakovics, B. Nacke Modell of protective (skull) layer in the inductor-crucible furnace Modelling for electromagnetic processing - Hannover, 2003, lpp. 261 - 266.	no
V. Frishfelds, A. Jakovics, B. Nacke Modelling of key factors in melting of oxides in inductor crucible Electromagnetic processing of materials - Lyon, 2003, 6 pp.	no
R. Mahnke, J. Kaupužs, V. Frišfelds Nucleation in physical and nonphysical systems Atmospheric research - 2003, Vol. 65, pp. 261-284.
S. Gendels, A. Jakovičs Numerical modelling of airflow and temperature distribution in heated rooms Latvian journal of physics and technical sciences - 2003, Nr. 3, pp. 3 - 20., ISSN 0868-8257
V. Frishfelds, S. Lundstrom, A. Jakovics Permeability of clustered fibre networks: modelling of unit cell Mechanics of composite materials - 2003, Vol. 39, Nr. 3, pp 265 - 272.
L. Gorbunov, A. Pedchenko, A. Feodorov, E. Tomzig, J. Virbulis, W. v. Ammon Physical modelling of the melt flow during large-diameter silicon single crystal growth Journal of Crystal Growth, Sep 2003, pp. 7-18	no
V. Frishfelds, B. Nacke, A. Jakovics Simulation of inductive melting process of oxides in inductor-crucible Modelling for electromagnetic processing - Hannover, 2003, lpp. 157 - 162.	no
A. Jakovics, E. Baake, A. Umbrashko Simulation von Schmelzenströmungen für industrielle Anwendungen Elektrowärme international - 2003, Nr. 1, S. 21 - 23.	no
A. Jakovics, J. Kaupuzs, B. Nacke Stability conditions of the build-up formation on the surface of refractory Magnetohydrodynamics - 2003, Vol. 39, Nr. 3-4	no
S. Gendels Telpas termiskā komforta apstākļu datormodelēšana IV Starptautiskā zinātniski praktiskā konference 'Vide. Tehnoloģija. Resursi' - Rēzekne, 2003., pp. 241-346., ISBN 9984-585-68-9
E. Baake, B. Nacke, A. Umbrashko, A. Jakovics Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) - 2003, Vol. 22, Nr. 1, lpp. 39 - 47.	no
A. Jakovičs, A. Umbraško, E. Baake Turbulento pārneses procesu Izpēte, lietojot lielo virpuļu modeli (LES) Latvijas fizikas biedrības 8. Konferences materiāli - Jelgava, 2003, lpp. 39 - 45.	no
Бурлаков Л.Г., Кузнецов М.Б., Павлов С.И. Историческая мозаика в задачах по физике. Экспериментальное учебное пособие.– 2-е изд., испр. и доп. Рига: Insight, 2002, 288 с.
V. Frishfelds, A. Jakovics, L. He, B. Niemeyer Adjustment of process parameters by modeling of selective separations Innovative Methoden zur Erfassung und Verminderung von umweltbelastenden Geruchsemissionen aus Landwirtschaft und Lebensmittelindustrie. - Hamburg, 2002, p. 85 - 91.	no
V. Bērziņš, U. Bethers, K.-P. Holz, J. Seņņikovs Approach for providing data series required in prognostic simulations
A. Jakovičs Būvkonstrukciju energoefektivitāte Latvijā - laikmetu griežos Enerģētika un automatizācija - 2002, Nr. 5, lpp. 26 - 30.	no
A. Jakovičs, S. Gendelis Būvkonstrukciju siltuma caurlaidības noteikšana reālos ēku ekspluatācijas apstākļos Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika II' - Rīga, 2002	no
V. Galindo, G. Gerbeth, W. von Ammon, E. Tomzig, J. Virbulis Crystal growth melt flow control by means of magnetic fields Energy Conversion and Management 43 (3) (2002) pp. 309-316.	no
S. Gendelis, A. Jakovičs Ēku blīvējuma pakāpes mērījumi - zemspiediena un pārspiediena testi Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika II' - Rīga, 2002	no
(Redaktors A. Jakovičs) Ēku norobežojošo konstrukciju siltumtehnika II Latvijas Universitāte, Rīga, 2002, 206 lpp.	no
A. Jakovičs, H. Trimmans Ēku siltuma zudumu koeficienta aprēķins un apkures siltuma patēriņa modelēšana Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika II' - Rīga, 2002	no
I. Muzikante, D. Cepite, E. Fonavs, A. Tokmakov, D. Erts, B. Polakov Incorporated Oriented polar molecules in PMMA polymeric films: characterization by Kelvin probe technique and atomic force microscopy Proceedings of 11th International Symposium on Electrets ISE-11, October 1-3, 2002, Melbourne, Australia, pp.383-385.	no
A. Jakovičs, B. Nacke, V. Frišfelds, I. Madžulis Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces Energy transfer and management - 2002, Vol. 43, pp. 345 - 352.
A. Jakovics Laboratorium fur mathematische Modellierung der Umwelt- und Technologieprozesse der Universitat Lettlands Elektrowarme international - 2002, Nr. 4, S. 143 - 148.	no
E. Baake, Nacke B., A. Umbraško, A. Jakovičs LES modelling of heat and mass transfer in turbulent recirculated flows Fundamental and applied MHD - Ramatuelle, 2002, Vol. 2, pp. 173-178.
B. Nacke, V. Frisfelds, A. Jakovičs Modeling of inductive melting of oxides in inductor crucible furnace Elektrowarme international - 2002, Nr. 3, pp. 105 - 109.
W. v. Ammon, R. Hoelzl, J. Virbulis, E. Dornberger, R. Schmolke, D. Graef On the mechanism of defect suppression in nitrogen doped silicon single crystals Solid State Phenomena, Vols. 82-84 2002 pp. 17-24	no
J. Virbulis, T. Wetzel, E. Tomzig, W. von Ammon Silicon melt convection in large size Czochralski crucibles Materials Science in Semiconductor Processing, Aug 2002	no
J. Kaupužs, A. Jakovičs Stability conditions at the build-up formation on the surface of a refractory Latvian journal of physics and technical sciences - 2002, Nr. 3, pp. 62 - 70.
B. Nacke, V. Frišfelds, A. Jakovičs Stability conditions in inductive melting of oxides in inductor crucible furnace Fundamental and applied MHD - Ramatuelle, 2002, Vol. 2, pp. 47-52.
A. Jakovičs, J. Kaupužs, B. Nacke Stability conditions of the build-up formation on the surface of refractory Fundamental and applied MHD - Ramatuelle, 2002, Vol. 2, pp. 113-118.
E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces Journal for computation and mathematics in electrical and electronic engineering (COMPEL) - 2002	no
Burlakovs L., Kuzņecovs M., Pavlovs S. Vēsturiskā mozaīka fizikas uzdevumos. Eksperimentāls mācību līdzeklis.– 2.izdev., izlab. un papild. Rīga: Insight, 2002, 288. lpp.
N. Jekabsons, P. Fernberg Characterization of short fiber composites fracture by cohesive zone approach ICCE/9, San Diego, June 30 - July 1, 2002	no
Бурлаков Л.Г., Павлов C.И. Атлас. Хронологическая мозаика научного и художественного освоения мира (от ранних цивилизаций до Нового времени). Экспериментальное учебное пособие.– 2-е изд., испр. и доп. Рига: Insight, 2001, 18 с.
Бурлаков Л.Г., Кузнецов М.Б., Павлов C.И., Ручковский А.А. Хронологическая мозаика научного и художественного освоения мира (от ранних цивилизаций до Нового времени). Экспериментальное учебное пособие в синхронистических таблицах.– 2-е изд., испр. и доп. Рига: Insight, 2001, 216 c.
A. Jakovičs, V. Frišfelds , J. Hoehne, B. Niemeyer, A. Eschenbach Adiabatic steam stripping of PAH contaminated droplets in reactor tube International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 94-99.
A. Jakovičs, S. Gendels , H. Truemmann Analysis of heat losses from typical buildings in Riga International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 190-197.
Burlakovs L., Pavlovs S. Atlants. Pasaules izzināšanas un mākslinieciskās attēlošanas hronoloģiskā mozaīka (no agrīnām civilizācijām līdz Jaunajiem laikiem). Eksperimentāls mācību līdzeklis.– 2.izdev., izlab. un papild. Rīga: Insight, 2001, 18. lpp.
A. Jakovičs , E. Baake Bericht vom International Scientific Colloquium 'Modelling for saving resources' in Riga, Lettland Elektrowärme international – 2001, Nr. 3, S. 111 - 113.	no
E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Dreidimensionale instationäre Untersuchungen der turbulenten Schmelzenströmung in Induktionsöfen Elektromagnetische Verfahrenstechniken. – Ilmenau, 001, 8 S.	no
O. Grabner; G. Muller; J. Virbulis; E. Tomzig; W. v. Ammon Effects of various magnetic field configurations on temperature distributions in Czochralski silicon melts Microelectronic Engineering, vol.56, no.1-2; May 2001; p.83	no
E. Baake, B. Nacke, A. Jakovičs, A. Umbraško Heat and mass transfer in turbulent flows with several recirculated flow eddies Magnetohydrodynamics – 2001, Vol. 37, Nr. 1-2, pp. 13-22.
V. Bērziņš, U. Bethers, J. Senņikovs Hydrographic regime of Gulf of Riga and water exchange with Baltic Proper: Years 1991/95 Finnish Marine Research Series	no
A. Jakovičs, M. Kirpo , A. Veispals, B. Nacke, E. Baake Measurement of the electrical conductivity of zircon at high temperatures International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 135-141.
E. Dornberger, W. von Ammon, J. Virbulis, B. Hanna and T. Sinno Modeling of transient point defect dynamics in Czochralski silicon crystals Journal of Crystal Growth, Volume 230, Issues 1-2, August 2001, Pages 291-299	no
A. Jakovičs, V. Frišfelds, B. Niemeyer, J. Hoehne Modelling of adiabatic steam stripping of PAH-water binary mixture in mean field approximation Latvian Journal of physics and technical sciences - 2001, Nr. 6, pp. 3 - 13.
A. Jakovičs, S. Gendels , H. Truemmann Modelling of air fluxes and temperature distribution in heated rooms International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 170-176.
V. Frišfelds, A. Jakovičs , I. Madžulis, B. Niemeyer Mutual diffusion of components in liquid PAH-water system in mean field approximation International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 107-112.
J. Virbulis, Th. Wetzel, A. Muižnieks, B. Hanna, E. Dornberger, E. Tomzig, A. Mühlbauer and W. v. Ammon Numerical investigation of silicon melt flow in large diameter CZ-crystal growth under the influence of steady and dynamic magnetic fields Journal of Crystal Growth 230, 2001, pp. 92 - 99	no
Th. Wetzel, A. Mužnieks, A. Mühlbauer, Y. Gelfgat, L Gorbunov, J. Virbulis, E. Tomzig and W. V. Ammon Numerical model of turbulent CZ melt flow in the presence of AC and CUSP magnetic fields and its verification in a laboratory facility J. of Crystal Growth Volume 230, Issues 1-2 August 2001 Pages 81-91	no
Burlakovs L., Kuzņecovs M., Pavlovs S., Ručkovskis A. Pasaules izzināšanas un mākslinieciskās attēlošanas hro¬noloģiskā mozaīka (no agrīnām civilizācijām līdz Jaunajiem laikiem). Eksperimentāls mācību līdzeklis sinhronās tabulās.– 2.izdev., izlab. un papild. Rīga: Insight, 2001, 216. lpp.
W. v. Ammon, E. Tomzig, J. Virbulis, L. Gorbunov, A. Pedchenko, A. Fedorov Physical modelling of a Czochralski process of semiconductor single crystal growth Proceedings of 4. International conference Single Crystal Growth and Heat & Mass transfer, Obinsk, Russia, 2001	no
(Editor A. Jakovičs ) Proceedings of the International Scientific Colloquium "Modelling for saving resources" University of Latvia, Riga, 2001, 224 pp.
E. Dornberger, J. Virbulis, B. Hanna, R. Hoelzl, E. Daub and W. von Ammon Silicon crystals for future requirements of 300 mm wafers Journal of Crystal Growth, Volume 229, Issues 1-4, July 2001, Pages 11-16	no
A. Muižnieks, G. Raming, A. Mühlbauer, J. Virbulis, B. Hanna and W. v. Ammon Stress-induced dislocation generation in large FZ- and CZ-silicon single crystals - numerical model and qualitative considerations Journal of Crystal Growth, Volume 230, Issues 1-2, August 2001, Pages 305-313	no
A. Jakovičs, S. Gendelis System of inspection of heat losses in structures of existing buildings in Latvia International conference 'Requirements to energy consumption level in buildings of the Baltic region' - Kaunas, 2001, pp. 105 – 114.	no
W. von Ammon, , R. Hölzl, J. Virbulis, E. Dornberger, R. Schmolke and D. Graf The impact of nitrogen on the defect aggregation in silicon Journal of Crystal Growth, Volume 226, Issue 1, June 2001, Pages 19-30	no
E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Transient 3D simulation of recirculated melt flow International scientific colloquium 'Modelling for saving saving resources' – Riga, 2001, pp. 129-134.
E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces Heating by internal sources – Padova, 2001, pp. 47 – 53.
N. Jekabsons, J. Varna Micromechanics of Damage Accumulation in 2.5D Woven Ceramic C-Fiber/SiC composite Mechanics of Composite Materials, issue No 4-5, 2001	no
A. Jakovičs, V. Krūmiņš, A. Banga Acis mūsu pilsētas sejā (jeb vai logi ir tikai skaistumam?) Būvēt. - 2000, Nr. 5, lpp. 38 – 43.	no
O. Graebner; A. Muehe; G. Mueller; E. Tomzig; J. Virbulis; W. von Ammon Analysis of turbulent flow in silicon melts by optical temperature measurement Materials Science and Engineering B: Solid-State Materials for Advanced Technology, Volume 73, Issue 1, 2000, Pages 130-133	no
A. Jakovičs, S. Gendelis, Z. Krievāns Būvkonstrukciju siltuma caurlaidības noteikšana reālos ēku ekspluatācijas apstākļos Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika' - Rīga, 2000, lpp. 12.1 - 12.9.	no
U. Bethers, J. Seņņikovs Calibration of sub-regional groundwater filtration model in vicinity of hydropower plant Abstract, XXV General Assembly of European Geophysical Society, Nice, April 25-29, 2000, Geophysical Research Abstracts, Vol.2, 2000.
A. Jakovičs, S. Gendelis, H. Trimmans Ēku siltuma zudumu un apkures siltuma patēriņa modelēšana Zinātniski-praktiskais seminārs 'Eku norobežojošo konstrukciju siltumtehnika' - Rīga, 2000, lpp. 24.1 - 24.15.	no
A. Jakovičs, S. Gendelis, Z. Krievāns Ēku siltuma zudumu un apkures vajadzības datormodelēšana Latvian Journal of Physics And Technical Sciences - 2000, Nr 3, lpp. 3 – 18.
A. Jakovičs, L. Šnīdere, V. Krūmiņš, S. Gendelis Gatavo būvizstrādājumu siltuma caurlaidības testēšanas iespējas Latvijā Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika' - Rīga, 2000, lpp. 16.1 - 16.9.	no
E. Baake, A. Jakovičs, B. Nacke, A. Umbraško Heat and mass transfer in turbulent flows with several recirculated flow eddies 4th International PAMIR MHD conference. Giens, France, September 18-24, 2000	no
A. Jakovičs, B. Nacke, I. Madzhulis, V. Frišfelds Influence of melt Flow and Temperature on Erosion of Refractory and Deposit Formation in Aluminium Melting Furnaces 4th International Conference MHD at dawn of 3rd Millenium, Giens, France, September 18-22, 2000	no
A. Jakovičs , B. Nacke, I. Madžulis, V. Frišfelds Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces MHD at dawn of 3-rd Millennium (4-th international conference) – Presqu’ile de Giens, 2000, pp. 851 – 856.	no
A. Jakovičs, J. Ozoliņš, V. Krūmiņš Logi ne tikai skaistumam, jeb par ko maksāsim XXI gadsimā?? Logi un durvis. -2000, Nr. 1, lpp. 41 – 49.	no
J. Seņņikovs, U. Bethers Modelling for the vertical structure of physical fields in Gulf of Riga Finnish Marine Research Series
J. Senņikovs, U. Bethers Shallow water calculation of circulation for Gulf of Riga Finnish Marine Research Series
A. Jakovičs, J. Ozoliņš, V. Melnstrazds Siltums mūsu mājokļos, jeb ko lāpīsim, kā šūsim jaunu Būvēt. - 2000, Nr. 4, lpp. 58 - 65.	no
E. Baake, B. Nacke, E. Dötsch, A. Umbraško, A. Jakovičs Wärme- und Stofftransport in der Schmelze von Tiegelinduktoröfen Induktionserwärmung – Ilmenau, 2000, 8 S.	no
I. Madžulis, A. Jakovičs, V. Frišfelds, B. Nacke Zinc Accumulation in Refractory Material in Strongly Inhomogeneous Temperature Field Latvian Journal of Physics and Technical Sciences, 2000, pp. 3 - 12.
J. Bystrom, N. Jekabsons, J. Varna An evaluation of Different Models for Prediction of Elastic Properties of Woven Composites Composites, Part B. Vol. 31B Jan. 1, 2000, pp. 7-20	no
J. E. Lindhagen, N. Jekabsons, L. E. Berglund Applications of bridging-law concepts to short-fiber composites 4. FEM analysis of notched tensile specimens Composites Science and Technology, vol. 60, 2000, pp. 2895-2901	no
N. Jekabsons Micromechanics of Damage Accumulation in 2.5D woven C/PyC/SiC composite MCMM-2000, Riga, June 2000	no
N. Jekabsons The effect of the number of stacked fabric layers on stiffness of woven composite 3th. Nordic meeting on composite materials, Aalborg, May 2000	no
Бурлаков Л.Г., Павлов C.И. Атлас. Хронологическая мозаика научного и художественного освоения мира (от ранних цивилизаций до Нового времени). Экспериментальное учебное пособие. Pигa: Insight, 1999, 16 c.	no
Бурлаков Л.Г., Кузнецов М.Б., Павлов C.И., Ручковский А.А. Хронологическая мозаика научного и художественного освоения мира (от ранних цивилизаций до Нового времени). Экспериментальное учебное пособие в синхронистических таблицах Рига: Insight, 1999, 192 c.	no
Burlakovs L., Pavlovs S. Atlants. Pasaules izzināšanas un mākslinieciskās attēlošanas hronoloģiskā mozaīka (no agrīnām civilizācijām līdz Jaunajiem laikiem). Eksperimentāls mācību līdzeklis Rīga: Insight, 1999, 16. lpp.	no
A. Jakovičs, L. Snidere, S. Gendelis Bestimmung des Wärmedurchgangs – koefitzienten von Bauelementen in existierenden Gebäuden und in der Thermokammer Maschinenbau im Informationszeitalter. - Ilmenau, 1999, S. 239 - 243.	no
A. Jakovičs, I. Madžulis, V. Frišfelds, B. Nacke Change of conductivity of fireproof material by metal vapor in presence of temperature gradient Modelling of material processing. – Riga, 1999, pp. 116 – 123.	no
A. Jakovičs, S. Gendelis, H. Truemmann, J. Virbulis Combined applications of thermography, heat transfer measurement and heat consumption modelling in the reconstruction of buildings Modelling of material processing. – Riga, 1999, pp. 158 – 167.	no
A. Jakovičs, S. Gendelis, Z. Krievāns Determination of the heat transfer coefficient of construction elements for existing buildings International scientific conference 'Progress in Engineering Heat Transfer' – Gdansk, 1999, pp. 145 - 152.	no
M. Keruss, J. Seņņikovs Determination of tides in Gulf of Riga and Baltic Sea Proc. International Scientific Colloqium 'Modelling of Material Processing', Riga, May 28 - 29, 1999.
M. Keruss, J. Seņņikovs Evaluation of the tidal characteristics in the Gulf of Riga and the Baltic Sea Abstract, XXIV General Assembly of European Geophysical Society, den Haag, April 19-23, 1999, Annales Geophysicae, Supplement II to Vol. 17.
U. Bethers Hidroloģisko procesu matemātiskie modeļi: pielietojums Latvijas transporttehnoloģiju ilgtspējīguma nodrošinājum? Seminārs 'Moderno transport – tehnoloģiju zinātniski tehniskais nodrošinšjums'. Konference 'Baltic Transport Gateway ‘99', Rīga	no
U. Bethers Hydrological processes in Latvia: a challange for modeler Proc. International Scientific Colloqium "Modelling of Material Processing", Riga, May 28 - 29, 1999.	no
V. Frišfelds, A. Jakovičs, I. Madžulis Interaction between unstationary temperature gradient and diffusion of metal vapour in porous material	no
Virbulis, J.; Wetzel, Th.; Muižnieks, A.; Raming., G.; Rexer, B.; Dornberger, E.; Ammon, W.v.; Mühlbauer, A Numerical modelling of melt flow during Czochralski silicon crystal growth Numerical modelling of melt flow during Czochralski silicon crystal growth. Proceedings of the Int. Scientific Colloquium Modelling of Material Processing, Riga , pp. 42-47, May 1999	no
Burlakovs L., Kuzņecovs M., Pavlovs S., Ručkovskis A. Pasaules izzināšanas un mākslinieciskās attēlošanas hro¬noloģiskā mozaīka (no agrīnām civilizācijām līdz Jaunajiem laikiem). Eksperimentāls mācību līdzeklis sinhronās tabulās Rīga: Insight, 1999, 192. lpp.	no
A. Jakovics, L. Shnidere, S. Gendelis, V. Krumins Standardised measurement of heat transfer coefficient of finished building structures in the heat chamber Modelling of material processing. – Riga, 1999, pp. 168 – 173.	no
U. Bethers, N. Jēkabsons, J. Senņikovs An approach for representation of 3D geological structures and modelling of groundwater flows Abstract, XXIII General Assembly of European Geophysical Society, Nice, April 20-24, 1998, Annales Geophysicae, Supplement II to Vol. 16.	no
U. Bethers, J. Senņikovs, R. Gržibovskis, G. Eberhards An investigation of prolonged coastline development by a coupled longshore/crosshore model Abstract, XXIII General Assembly of European Geophysical Society, Nice, April 20-24, 1998, Annales Geophysicae, Supplement II to Vol. 16.	no
A. Jakovičs, I. Madžulis, V. Frišfelds, B. Nacke Auswirkungen der Temperatur auf die Diffusion der Zinkdämpfe im feuerfesten Material 43. Internationales wissenschaftliches Kolloquium, Band 3. – Ilmenau, 1998, S. 720 – 725.	no
V. Frišfelds, I. Madžulis, J. Rimshans Difference Scheme for Dynamic Simulation Describing Stochastic Kinetics of Molecules in Ceramics International Conference Mathematical Modelling and Analysis, Vilnius 'Technika', Vol. 3, 1998, pp. 93-97.	no
I. Madžulis, A. Jakovičs, V. Frišfelds, B. Nacke Diffusion of metal vapour in porous material in strongly inhomogeneous temperature field Latvian Journal of Physics and Technical sciences. – 1998, Nr. 4, pp. 39 – 51.	no
A. Jakovičs, H. Trümann, A. Banga, A. Mühlbauer Einsatz der Gebäude – thermographie zur Diagnostik der Wärmedämmung an osteuropäischen Hochbauten Elektrowärme international A. – 1998, Nr. 3, S. 93-102.	no
V. Bērziņš, U. Bethers, J. Senņikovs Hydrographic Regime of Gulf of Riga and Water Exchange with Baltic Proper during 1990's Abstract, The Gulf of Riga Project, Symposium in Jūrmala, Latvia, May 10-14, 1998, p. 60.
V. Bērziņš, U. Bethers, J. Senņikovs Internal waves in the Gulf of Riga: observations and link with model of vertical TS structure Abstract, XXIII General Assembly of European Geophysical Society, Nice, April 20-24, 1998, Annales Geophysicae, Supplement II to Vol. 16.
J. Senņikovs, R. Gržibovskis, U. Bethers, K.-P. Holz Multi-level approach to the estimation of the load transport near Ruegen Proceedings ICHE'98, Cottbus, 1998. Abstract in 'Advances in Hydro – Science and Engineering', Vol. III, The University of Mississippi, (p.124). Full text on CD 'CyberProceeding 3rd Int. Conf. on Hydroscience and Engineering', ISBN 0-937099-09-0
U. Bethers, N. Jēkabsons, J. Senņikovs Object-oriented approach for coupling data assimilation, calculation and visualisation for groundwater flows Proceedings ICHE'98. Cottbus, 1998. Abstract in 'Advances in Hydro - Science and Engineering', Vol. III, The University of Mississippi, (p. 285). Full text on CD 'Cyber Proceeding 3rd Int. Conf. on Hydroscience and Engineering', ISBN 0-937099-09-0.
A. Mühlbauer, A. Jakovičs, J. Virbulis, E. Westphal Transfer processes in the manufacturing of single silicon crystals and high temperature alloys by increasing flow intensity	no
J. Bystrom, N. Jekabsons, L.-E. Persson A comparison of different homogenization models and experimental results Proceedings of ICCE/6, Ed: David Hui, 97-98, 1998	no
J. Bystrom, N. Jekabsons, L.-E. Persson and J. Varna Using reiterated homogenization for stiffness computation of woven composites Proceedings of ICCE/5, Ed: David Hui, 133-134, 1998	no
A. Jakovičs, N. Jekabsons, A. Mühlbauer, H. Trümmann Bestimmung des effektiven Wärmedurchgangskoeffizienten von Bauelementen unter praxisnahen Bedingungen Elektrowärme international A. - 1997, Nr. A2, S. 77 - 83.	no
J. Senņikovs, U. Bethers Calculation of circulation in the Gulf of Riga by a shallow water model Thesis 22nd EGS General Assembly, Vienna, April 1997, Annales Geophysicae, Vol.15-sup. II, p. C 383.
A. Jakovičs, N. Jekabsons, J. Virbulis Determination of the effective heat transfer coefficient in the elements of existing buildings Latvian Journal of Physics and Technical Sciences. - 1997, Nr. 2, pp. 71 - 83.	no
V. Bērziņš, U. Bethers, J. Senņikovs Investigations of physical fields in the Gulf of Riga: measurements and model of vertical temperature and salinity structure with account for ice formation Thesis 22nd EGS General Assembly, Vienna, April 1997, Annales Geophysicae, Vol.15-sup. II, p. C 375.	no
A. Jakovičs, A. Banga Kad siltums kļūst redzams Zvaigžņotā debess. - 1997, Vol. 156, pp. 17 – 22, 40.	no
U. Bethers, J. Senņikovs Mathematical model for load transport in selected coastal area Thesis 22nd EGS General Assembly, Vienna, April 1997, Annales Geophysicae, Vol.15-sup. II, p. C 251.	no
U. Bethers, J. Senņikovs Mathematical modeling of longshore load transport near Latvian harbour Ventspils Computer Modelling of Seas and Coastal Regions, J.R.Acinas, C.A.Brebbia (Ed.) Proc. COASTAL 97, Computational Mech. Publications, 1997, pp. 33-42.
U. Bethers, J. Senņikovs Modelling the nearshore hydrodynamics: a tool of forecasting Abstract, practical - scientific seminar 'Oil Terminals in the Eastern Baltic - Environmental Problems' , Jurmala, Latvia, May 29 - June 2, 1997.
A. Jakovičs, A. Mühlbauer Transfer processes of the high temperature alloys in the induction furnaces with cold crucible. Transfer phenomena in magnetohydrodynamic and electroconducting flows Grenoble, 1997, Vol. 2, pp. 469 – 474.	no
Burlakovs L., Kuzņecovs M., Pavlovs S. Vēsturiskā mozaīka fizikas uzdevumos. Eksperimentāls mācību līdzeklis Rīga: Insight, 1997, 288. lpp.	no
Бурлаков Л.Г., Кузнецов М.Б., Павлов С.И. Историческая мозаика в задачах по физике. Экспериментальное учебное пособие. Рига: Insight, 1996, 308 с.	no
U. Bethers, J. Senņikovs Application of shallow water and sediment transport models for harbour engineering problems in Latvia Forum Bauinformatik, Cottbus. VDI Verlag, Reihe 4, Bauingenieurwesen, Nr. 135, 1996, pp. 197-202.	no
R. Drewek, A. Jakovičs, A. Mühlbauer, B. Nacke Experimental and numerical investigations of the melt flow in channel-induction furnaces Magnetohydrodynamics. - 1996, Vol. 32, Nr. 4, pp. 433 - 442.	no
N. Jekabsons, A. Jakovičs, B. Nacke Gekoppelte Modellierung des Temperatur- und Metallkonzentrationfeldes in der Feuerfestauskleidung Computeranwendung in der Elektrowärmetechnik. - Ilmenau, 1996, 8 S.	no
A. Jakovičs Aus der Geschichte der wissenschaftlichen Zusammenarbeit. 10 Jahre der wissenschaftlichen Zusammenarbeit (1986 - 1995) Riga/Hannover, 1995, S. 4 -6.	no
U. Bethers, A. Jakovičs, N. Jēkabsons, I. Madžulis, B. Nacke Deposit formation and clogging in induction channel furnaces 40th International scientific colloquium. - Ilmenau, 1995, S. 31 - 36.	no
J. Virbulis, A. Mühlbauer, A. Jakovičs Effect of inductor shape on the shape of interfaces and melt convection in floating zone silicon crystal growth 14th International conference on magnetohydrodynamics. - Riga, 1995, 1 p.	no
R. Drewek, A. Jakovičs, A. Mühlbauer, B. Nacke Experimental and numerical investigations on the melt flow in channel-induction furnaces 14th International conference on magnetohydrodynamics. - Riga, 1995, 1 p.	no
E. Baake, A. Jakovich, A. Mühlbauer, W. Andree Extension of the k-e model for the numerical simulation of the melt flow in induction crucible furnaces Metallurgical and materials transactions B. - 1995, Vol. 26B, pp. 529 - 536.	no
N. Jekabsons, A. Jakovičs, B. Nacke Infiltration von Zink in feuerfester Zustellung von Induktions-Rinnenöfen 40th International scientific colloquium. - Ilmenau, 1995, S. 54 - 59.	no
U. Bethers, A. Jakovičs, N. Jekabsons, I. Madžulis, B. Nacke, A. Mühlbauer Influence of the temperature distribution of the build-up formation in the induction channel furnaces Advances in engineering heat transfer. - Sauthampton/Boston, 1995, pp. 433 - 442.	no
U. Bethers, A. Jakovičs, N. Jēkabsons, I. Madžulis, B. Nacke Modelling of the deposit formation in channel-type induction furnaces Magnetohydrodynamics. - 1995, Vol. 31, Nr. 3-4, pp. 307 - 315.	no
J. Senņikovs, U. Bethers Modelling of the vertical temperature and salinity structure of the Gulf of Rīga Latvian Journal of Physycs and Technical Sciences, No.1, 1995, Rīga, pp. 19-41.	no
J. Virbulis, A. Mühlbauer, A. Jakovičs Numerical modeling of the float zone silicon crystal growth 10th Conference on the computation of electromagnetic fields 'Compumag'. - Berlin, 1995, pp. 606 - 607.	no
E. Baake, A. Jakovičs, A. Mühlbauer Turbulence and low-frequency oscillations in the thoroidal electromagnetically induced vortical melt flow 14th International conference on magnetohydrodynamics. - Riga, 1995, 1 p.	no
Burlakov L., Pavlov S., Tsilevich B. Sciences at School: Integrated course based on Methodology of Simulation (Mathematical Modelling) The Fourth International School Year 2020 Conference 'Education for the 21st Century: The Change Process' (Bogensee, September 5th – 9th, 1993) – Bogensee (Germany): The European Educational House, 1993, 35 p.	no
Бурлаков Л.Г., Бахвалов В.A., Павлов C.И., Цилевич Б.Л. Естествознание 5. Солнечная система. Земля. Человек. Учебное пособие для учащихся 5 класса Рига: Insight, 1992, 95 с.	no
Бурлаков Л.Г., Павлов C.И., Цилевич Б.Л. O разработке содержания курса 'Естествознание' на основе методологии моделирования. I. Описание подхода ЭВМ в образовании: Серия 'Информатика' / Научные труды Латвийского Университета – Рига: ЛУ, 1991, т. 561, с. 5–16.	no
Бурлаков Л.Г., Бухвалов В.A., Павлов C.И., Цилевич Б.Л. O разработке содержания курса 'Естествознание' на основе методологии моделирования. II. Интегрированный курс (1–6 классы) ЭВМ в образовании: Серия “Инфор¬матика” / Научные труды Лат¬вийского Университета – Рига: ЛУ, 1991, т. 561, с. 17–26.	no
Бурлаков Л.Г., Глухов В.В., Коротин В.Ю., Павлов C.И., Цилевич Б.Л. O разработке содержания курса ‘Естествознание” на основе методологии моделирования. III. Интегрирующий курс (7–12 классы) ЭВМ в образо¬вании: Серия ‘Информатика” / Научные труды Латвийского Университета – Рига: ЛУ, 1991, т. 561, с. 27–40.	no
Burlakovs L., Cilevičs B., Pavlovs S. Par integrēto dabaszinātņu kursa izstrādi uz modelēšanas metodoloģijas bāzes Latvijas Zinātņu Akadēmijas Vēstis, 1991, Nr. 7, 40–46. lpp.
Павлов С.И., Цилевич Б.Л. Педагогические программные средства на базе математического моделирования Информатика и образование, 1989, № 6, с. 64–69.	no
Никифорова Н.В., Павлов С.И., Тир Л.Л., Якович А.Т. Численное исследование циркуляции расплава в индукционной печи с разрезным проводящим тиглем с использованием модели меридионального сечения Магнитная гидродинамика, 1990, № 2, с. 92–98.	no
Cilevičs B., Pavlovs S., Ustinovs N. Par kompjuterapmācības tehnoloģijas izstrādi un pedagoģisko programmlīdzekļu projektēšanu uz matemātiskās modelēšanas bāzes un ar mākslīgā intelekta elementiem Latvijas Zinātņu Akadēmijas vēstis, 1990, Nr. 11, 116.–123. lpp.
Никифорова Н.В., Павлов С.И., Якович А.Т. Численное исследование влияния числа секций холодного тигля и частоты тока индуктора на электромагнитные поля в индукционной печи Известия АН ЛатвССР (серия фи¬зических и технических наук), 1989, № 3, С. 109–115.
Бетхерс У.А., Муйжниекс А.Р., Никифорова Н.В., Павлов С.И., Тир Л.Л., Якович А.Т. Численное моделирование электромагнитного поля в меридиональном сечении индукционной печи с разрезным проводящем тиглем Известия АН ЛатвССР (серия физических и технических наук), 1989, № 1, с. 81–88.
Елкина 0.М., Курмис А.Г., Озиш И.Я., Павлов С.И., Пайкенс А.Р., Эглайс М.О. Представление национальных алфавитов на персональных ЭВМ и кодовые таблицы символов ЭВМ в образовании. Программное обеспече¬ние – Рига: ЛГУ им. П.Стучки, 1988, с. 25–38.	no
Ершов А.П., Монахов В.М., Витиньш М.В., Гольц Я.Э., Икауниекс Э.А., Кузнецов А.А., Лапчик М.П., Лесневский А.С., Павлов С.И., Первин Ю.А., Смекалин Д.О., Фрейвалд Р.В. Изучение основ информатики и вычислительной техники. Методическое пособие для учителей и преподавателей средних учебных заведений: Ч. II Под ред. А.П.Ершова, В.М.Монахова – Москва: Просвещение, 1986, 208 с.
Павлов С.И. Конечно-разностный расчет магнитного поля токов, пересекающих границу раздела однородных проводников Модели физических процессов в сплошных средах – Рига: ЛГУ им.П.Стучки, 1985, с. 37–46.	no
Никифорова Н.В., Павлов С.И., Тир Л.Л. Расчеты электромагнитных, энергетических и гидродинамических характеристик индукционной печи с холодным тиглем (двухмерная модель) Магнитная гидродинамика, 1984, № 2, с. 101–110.	no
Павлов С.И. Численное моделирование замкнутого течения проводящей жидкости в электромагнитном поле. Автореферат диссертации на соискание ученой степени кандидата физико-математических наук по специальности 01.02.05.– Механика жид-костей, газа и плазмы Ленинград: Ленинградский политехнический институт им. М.И.Калинина, 1984, 18 с.
Павлов С.И. Численное моделирование замкнутого течения проводящей жидкости в электромагнитном поле. Диссертация на соискание ученой степени кандидата физико-математических наук по специальности 01.02.05.– Механика жидкостей, газа и плазмы Рига: ЛГУ им. П.Стучки, 1984, 216 с.	no
Павлов С.И. О выборе метода численного расчета движения расплава в индукционной тигельной печи Электродинамика и механика сплошных сред. Промышленные процессы и устройства – Рига: ЛГУ им. П.Стучки, 1983, с. 3–21.	no
Павлов С.И., Якович А.Т. Влияние мениска на циркуляцию расплава в индукционной электропечи Магнитная гидродинамика – 1981, № 3, с. 104–109.	no
Микельсон Ю.Я., Павлов С.И., Якович А.Т. Численное моделирование МГД-течения в области произвольной осесимметричной конфигурации Магнитная гидродинамика – 1980, № 3, с. 73–80.	no
Микельсон Ю.Я., Якович А.Т., Павлов С.И. Численное исследование осреднённого МГД-течения в цилиндрической области с использованием рабочих гипотез для турбулентных напряжений Магнитная гидродинамика – 1978, № 1, с. 51–58.	no