|
|
|
List of laboratory´s publications by year
| 25 publications |
File | M. Ščepanskis, V. Geža, R. Viļums
Connecting Engineering Open Source Software: New Horizon of Modeling Oportunities
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 175-178 |
 |
K. Bergfelds, A. Sabanskis, J. Virbulis
Implementation of Small-scale Laboratory Crystal Growth Furnace for the Development of Mathematical Model for Large-scale Industrial CZ Process
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 113-118 |
|
A. Krauze, V. Silamiķelis
Mathematical Modeling of Holding Melting Zone with LF and HF EM Fields in Floating Zone Crystal Growth Facilities
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 119-124 |
|
A. Krauze, A. Kravtsov, J. Virbulis
Modeling Electron Beam Parameters and Plasma Interface Position in an Anode Plasma Electron Gun with Hydrogen Atmosphere
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 167-172 |
|
V. Geža, A. Jakovičs, S. Gendelis, I. Usiļonoks
Modeling of Granule Filling in Wall Gap for Estimation of Role of Thermal Convection
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 127-132 |
|
V. Dzelme, M. Sarma, A. Jakovics, K. Thomsen
Modelling of Rotating Permanent Magnet Induced Liquid Metal Stirring
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 301-306 |
|
M. Birjukovs, A. Jakovičs, W. Holweger
Modelling of Thermal Stresses in Bearing Steel Structure Generated by Electrical Current Impulses
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 201-208 |
|
G. Zageris, V. Geza, A. Jakovics
Numerical Investigation of Slag Formation in an Entrained-flow Gasifier
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 235-242 |
|
V. Geža, J. Venčels, Ģ. Zāģeris S. Pavlovs
Numerical Modeling of Surface Waves Generated by Low Frequency Electromagnetic Field for Silicon Refinement Process
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 155-160 |
|
J. Vencels, A. Jakovics, V. Geza
Simulation of 3D MHD with Free Surface Using Open-source EOF-library
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 81-86 |
|
J. Ratnieks, S. Gendelis, A. Jakovics, D. Bajare
Analyses of phase change materials efficiency in warm-summer humid continental climate conditions
IOP Conference Series: Materials Science and Engineering, vol. 251, p. 012119, Oct. 2017 |
|
Pavlovs S., Jakovics A., Sushkovs V., Baake E.
Gas bubbles and electrically conductive liquid turbulent flow in uniform magnetic field
Magnetohydrodynamics, 2017, Vol. 53, No. 1, pp. 179192 | no |
K. Surovovs, M. Plāte, J. Virbulis
High-frequency Heat Induction Modeling for a Novel Silicon Crystal Growth Method
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 37-42 |
|
Pavlovs S., Jakovics A., Sushkovs V., Baake E.
Influence of magnetic field on gas bubbles flow in liquid metal
International Journal of Applied Electromagnetics and Mechanics (IJAEM), 2017, Vol. 53, No. S1, pp. S31S41 | no |
S. Spitans, H. Franz, E. Baake, A. Jakovics
Large-scale Levitation Melting and Casting of Titanium Alloys
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 59-66 |
|
Pavlovs S., Jakovics A., Sushkovs V., Baake E.
LES-study of gas bubbles and liquid metal turbulent MHD-flow for different parameters
Proceeding of the XVIII Congress UIE-2017, June 69, 2017, Hannover, Germany, 462467 pp. |
|
J. Ratnieks, A. Jakovičs, S. Gendelis
Long term energy efficiency study on different wall envelopes in Latvian climate conditions
Energy Procedia, Volume 132, October 2017, Pages 441-446 |
|
A. Sabanskis, J. Virbulis
Modelling of Thermal Field and Point Defect Dynamics During Silicon Single Crystal Growth Using CZ Technique
Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 51-56 |
|
S. Gendelis, A. Jakovičs, J. Ratnieks, L. Bandeniece
Monitoring results and analysis of thermal comfort conditions in experimental buildings for different heating systems and ventilation regimes during heating and cooling seasons
OP Conference Series: Materials Science and Engineering, vol. 251, p. 012053, Oct. 2017 |
|
S. Gendelis, A. Jakovics, J. Ratnieks
Results of long-term energy efficiency monitoring of test buildings under real climatic conditions
17th International Multidisciplinary Scientific GeoConference SGEM 2017, www.sgemviennagreen.org, SGEM2017 Vienna GREEN Conference Proceedings, ISBN 978-619-7408-29-4 / ISSN 1314-2704, 27 - 29 November, 2017, Vol. 17, Issue 63, 643-650 pp; DOI: 10.5593/sgem2017H/63/S26.081 |
|
S.Gendelis, A. Jakovičs, J. Ratnieks
Thermal comfort condition assessment in test buildings with different heating/cooling systems and wall envelopes
Energy Procedia, Volume 132, October 2017, Pages 153-158 |
|
V. Geža, A. Jakovičs, S. Gendelis, I. Usiļonoks, J. Timofejevs
Thermal conductivity of disperse insulation materials and their mixtures
IOP Conference Series: Materials Science and Engineering, vol. 251, p. 012012, Oct. 2017 |
|
Павлов С. (Pavlov S.)
Системы высокопроизводительных вычислений в 20162017 годах: обзор достижений и анализ рынков. Часть I. HPC-системы, серверы, облачная IT-инфраструктура. Часть II. Суперкомпьютеры. Часть III. Компьютеры, планшеты, смартфоны. Часть IV. Процессоры. Часть V. Результаты года. Часть VI. Планы и прогнозы (High-performance computing systems in 20162017: achievements review and markets analysis. Part 1. HPC-systems, servers, cloud IT-infrastructure. Part 2. Supercomputers.Part 3. Computers, tablets, smartphones. Part 4. Processors. Part 5. Results of the year. Part 6. Plans and Forecasts)
CAD/CAM/CAE Observer, 2017, № 4, с. 615; № 5, с. 7186; №7, с. 614; №8, с. 5566; 2018, №1, с. 7081; №2, с. 615 |
|
Павлов С. (Pavlov S.)
Системы электронного и электротехнического проектирования в 2016 году: обзор достижений и анализ рынка (Electronic Design Automation systems in 2016: achievements review and market analysis)
CAD/CAM/CAE Observer, 2017, № 3, с. 2336 |
|
Павлов С. (Pavlov S.)
CAE-технологии в 2016 году: обзор достижений и анализ рынка (CAE technologies in 2016: achievements review and market analysis)
CAD/CAM/CAE Observer, 2017, № 6, с. 621 |
|
|
|
