|
|
|
List of laboratory´s publications by year
| 37 publications |
File | M. Đčepanskis, A. Jakovičs, I. Kaldre, W. Holweger, B. Nacke
A hypothesis on the electromagnetic cause of white etching cracks in bearing steel
Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition. - Dallas, Texas, USA, 2015 | no |
M. Đčepanskis, A. Jakovičs, E. Baake, B. Nacke
A model for homogenization of solid alloying admixtures in an induction crucible furnace
Steel Research International, 2015, Vol. 86, pp. 169-174 | no |
M. Scepanskis, A. Jakovics
A model for optimisation of homogenization process of solid alloying inclusions in an induction crucible furnace
Proceedings of 9-th Int. conference on clean steel – Budapest, September 2015, 9 p (electronic publication) | no |
M. Scepanskis, A. Jakovics, T. Beinerts, R. Nikoluskins, K. Thomsen, P. Vontobel
A new neutron radiography experimental technique for dynamic control of inclusions in electromagnetic induction melting and stirring equipment
Proceedings of 9-th Int. conference on clean steel – Budapest, September 2015, 7 p (electronic publication) | no |
M. Scepanskis, M. Sarma, R. Nikoluskins, K. Thomsen, A. Jakovics, P. Vontobel, T. Beinerts, A. Bojarevics, E. Platacis
A report on the first neutron radiography experiment for dynamic vizualization of solid particles in an intense liquid metal flow
Magnetohydrodynamics - 2015, Vol. 51, No. 2, pp. 257–265 | no |
Sakipova, S., Jakovics, A., Gendelis, S.
Analysis of energy supply from renewable sources considering the climate in Riga
Proceedings of ECOS 2015: 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2015, Pau (France), 2015, 8 pp. |
 |
Gendelis, S., Jakovičs, A., Dzenis, T., Bandeniece, L.
Analysis of Thermal Comfort Conditions and Actual Energy Efficiency for Different Heating Systems in Test Buildings
In: Proceedings of REHVA Annual Conference 2015, Latvia, Rîga, 6-9 May, 2015. Riga: RTU PRESS, 2015, pp.89-94. ISBN 978-9934-10-685-9. e-ISBN 978-9934-10-717-7. (DOI: 10.7250/rehvaconf.2015.013) |
|
V. Geza, B. Nacke, E.Baake, A.Jakovics
Anisotropy of flow and transition between mixing regimes in a physical model of directional solidification
Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 15–24 |
|
Vardanjan, R., Laizans, A., Jakovics, A., Gendelis, S.
Biogas specific heat capacity variations during upgrading
Engineering for Rural Development. In 14th International Scientific Conference on Engineering for Rural Development 2015 (pp. 372-376). Jelgava, Latvia: Latvia University of Agriculture. |
|
M. Scepanskis, A. Jakovics, K. Thomsen, T. Beinerts, M. Sarma, P. Vontobel, R. Nikoluskins, A. Bojarevics
Dynamic neutron radiography for liquid metals applications
8th Int. conference on Electromagnetic processing of materials – Cannes, October 2015, p. 503 – 506. | no |
Apine, I., Orola, L., Jakovics, A.
Effect of Building Envelope Materials on Indoor Air Quality in Low Energy Test Houses
International Journal Of Environmental Science And Development, 6(12), 2015. pp. 952-957.(DOI: 10.7763/IJESD.2015.V6.728) |
|
S. Spitans, E. Baake, A. Jakovics
Electromagnetic levitation melting of metals on a large scale: simulation and experiments
8th Int. conference on Electromagnetic processing of materials – Cannes, October 2015, p. 583 - 586. | no |
A. Jakovičs, I. Dimdiňa
Energoefektivitâtes monitoringa aktualitâtes eksperimentâlajâs bűvçs
Latvijas bűvniecîba – 2015, Nr. 1, 96.-97. lpp. |
|
Jakovičs, A., Gendelis, S. & Bandeniece, L.
Energy Efficiency and Sustainability of Different Building Structures in Latvian Climate
IOP Conference Series: Materials Science and Engineering, vol. 96, p. 012032, 8 pp, Nov. 2015. online |
|
S. Gendelis, A. Jakovičs, L. Bandeniece
Experimental Research of Thermal Comfort Conditions in Small Test Buildings with Different Types of Heating
Energy Procedia, Volume 78, November 2015, Pages 2929-2934, ISSN 1876-6102 |
|
Ozoliňđ, A., Jakovičs, A., Gendelis S.
Impact of Different Building Materials on Summer Comfort in Low-Energy Buildings
Latvian Journal of Physics and Technical Sciences. Volume 52, Issue 3, Pages 44–57 (doi:10.1515/lpts-2015-0017) |
|
Pavlovs S., Jakovics A., Sushkovs V., Nacke B.
LES-study of heat transfer in the melt for metallurgical MHD devices with power supply by inductor and over electrodes
Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 67-81 | no |
S. Gendelis, A. Timuhins, A. Laizans, L. Bandeniece
Mathematical Modeling of Dual Layer Shell Type Recuperation System for Biogas Dehumidification
Latvian Journal of Physics and Technical Sciences. Volume 52, Issue 6, Pages 49–60, ISSN (Online) 0868-8257, DOI: 10.1515/lpts-2015-0035 |
|
A. Jakovics, S. Gendelis, A. Laizans, D. Vardanjans
Modelling of heat exchange in counterflow shell-type system
Advanced Materials Research, Vol. 1117, pp 126-131, 2015. (doi:10.4028/www.scientific.net/AMR.1117.126) | no |
M. Scepanskis, A. Jakovics, E. Baake, B. Nacke
Molten salts cannot be used for the study of turbulent electromagnetically driven flows of liquid metal
// Metallurgical and materials transactions B – 2015, vol. 46 B, Nr. 5, p. 2015 – 2017. | no |
M. Sarma, M. Scepanskis, A. Jakovics, K. Thomsen, R. Nikoluskins, P. Vontobel, T. Beinerts, A. Bojarevics, E. Platacis
Neutron radiography visualization of solid particles in stirring liquid metal
Physics procedia – 2015, Vol. 69, pp. 457–463 | no |
S. Spitans, E. Baake, A. Jakovics
New technology for electromagnetic levitation melting of metals
Applied mechanics and materials - 2015, Vol. 698, pp. 237–244 | no |
S. Spitans, E. Baake, B. Nacke, A. Jakovics
New technology for large scale electromagnetic levitation melting of metals
Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 121–132 | no |
S. Spitans, E. Baake, B. Nacke, A. Jakovics
Numerical modeling of free surface dynamics of melt in an alternate electromagnetic field. Part II. Conventional electromagnetic levitation
Metallurgical and materials transactions B – 2015, vol. 46 B | no |
S. Spitans, E. Baake, A. Jakovics, H. Franz
Numerical simulation of electromagnetic levitation in a cold crucible furnace
Magnetohydrodynamics - 2015, Vol. 51, No. 3, pp.567-578 | no |
Jakovics A., Pavlovs S., Baake E., Steinberg T., Sushkovs V., Tatulcenkovs A.
Numerical study of gas bubbles collective dynamics in the melt influenced with magnetic field
Proceeding of the 8th International Conference on Electromagnetic Processing of Materials EPM’2015, October 12–16, 2015, Cannes, France, pp. 183–186 |
|
Pavlovs S., Jakovics A., Sushkovs V., Nacke B.
Numerical study of turbulent flow and thermal field in industrial electrotechnological devices with combined power supply
Proceeding of the 8th International Conference on Electromagnetic Processing of Materials EPM’2015, October 12–16, 2015, Cannes, France, pp. 147–150 |
|
Якович А., Гендель С., Сакипова С.Е. (A. Jakovičs, S. Gendelis, S. Sakipova)
Otsenka energoeffektivnosti ispol'zovaniya teplovykh nasosov na osnove vozobnovlyayemykh istochnikov energii (Оценка энергоэффективности использования тепловых насосов на основе возобновляемых источников энергии)
Proceedings “Chaos and structures in nonlinear systems. Theory and experiment” – 2015, Karaganda, pp. 314–319 (Материалы 9-й международной научной конференци "Хаос и структуры в нелинейных системах. Теория и эксперимент", 18-20 июня 2015 года, Караганда, стр. 314-319) (in Russian) |
|
M. Scepanskis, E. Yu. Koroteeva, V. Geza, A. Jakovics
Simulation of liquid metal flow induced by counter-rotating permanent magnets in a rectangular crucible
Magnetohydrodynamics – 2015, Vol. 51, No. 1, pp. 37-44 | no |
S. Sakipova, A. Jakovičs, S. Gendelis
Studies Energy Efficiency of the Renewable Sources use Considering Climate in Latvia
Energy Procedia, Volume 78, November 2015, Pages 1980-1984, ISSN 1876-6102 |
|
M. Đčepanskis, A. Jakovičs, I. Kaldre, W. Holweger, B. Nacke, A. M. Diederichs
The numerical model of electrothermal deformations of carbides in bearing steel as the possible cause of white etching cracks initiation
Tribology letters – 2015, Vol. 59, Nr. 2, p. 1–10 | no |
J. Ratnieks, A. Jakovics, S. Gendelis
Transient Modelling of Thermal Conditions in Test Buildings Including Radiation
Energy Procedia, Volume 78, November 2015, Pages 2905-2910, ISSN 1876-6102 |
|
W. Holweger, M. Wolf, D. Merk, T. Blass, M. Goss, J. Loos, S. Barteldes, A. Jakovics
White etching crack root cause investigations
Tribology transactions – 2015, Vol. 58, pp. 59 – 69. | no |
Павлов С. (Pavlov S.)
Системы высокопроизводительных вычислений в 2014–2015 годах: обзор достижений и анализ рынков. Часть I. Серверы, компьютеры, планшетники, смартфоны. Часть II. Процессоры. Часть III. суперкомпьютеры. Часть IV. Результаты года. Часть V. Планы и прогнозы (High-performance computing systems in 2014–2015: achievements review and markets analysis. Part 1. Servers, computers, tablets, smartphones. Part 2. Processors. Part 3. Supercomputers. Part 4. Results of the year. Part 5. Plans and forecasts)
CAD/CAM/CAE Observer, 2015, № 5, с. 63–76; №6, с. 56–63; №8, с. 78–90; 2016, №1, с. 72–80; №2, с. 77–86 |
|
Павлов С. (Pavlov S.)
Системы электронного и электротехнического проектирования в 2014 году: обзор достижений и анализ рынка (Electronic Design Automation systems in 2014: achievements review and market analysis)
CAD/CAM/CAE Observer, 2015, № 3, с. 8–18 |
|
Павлов С. (Pavlov S.)
CAE-технологии в 2014 году: обзор достижений и анализ рынка. Часть I, II (CAE technologies in 2014: achievements review and market analysis. Parts 1, 2)
CAD/CAM/CAE Observer, 2015, № 4, с. 25–35; №7, с. 77–81 |
|
Суханова А., Павлов С. (Soukhanova A., Pavlov S.)
“Продукты LMS обеспечивают инновационный подход к моделированию и испытаниям сложной техники”. Интервью П.А. Тараненко (Южно-Уральский государственный университет, директор НОЦ “Экспериментальная механика”) (“LMS solutions provide the innovative approach to modelling and testing of complex technical equipment”. Interview with P.A.Taranenko (South Ural State University, director of Scientific and Educational Centre “Experimental Mechanics”))
CAD/CAM/CAE Observer, 2015, № 4, с. 6–17 |
|
|
|
