|
|
|
List of laboratory´s publications by year
| 30 publications |
File | J. Grechenkovs, A. Jakovich and S. Gendelis
3D Numerical Analysis of Heat Exchange in Building Structures with Cavities
Latvian Journal of Physics and Technical Sciences, Volume 48, Number 1 / 2011 , pp. 3 - 12 (DOI: 10.2478/v10047-011-0001-1) |
 |
A. Piliksere, A. Valainis and J. Seņņikovs
A flood risk assessment for Riga city taking account climate changes
European Geosciences Union General Assembly 2011, Vienna, Austria, 03 08 April 2011 | no |
L.G. Westerberg, V. Geza, A. Jakovics, T.S. Lundström
Burner Backflow reduction in regeneration furnace
Engineering Applications of Computational Fluid Mechanics 2011, Vol. 5, Nr. 3, pp. 372 - 383. | no |
S. Spitāns, A. Jakovičs, B. Nacke, E. Baake
Coupled Electromagnetic and Hydrodynamic Numerical Calculation of Free Surface Dynamics of Melt in Induction Crucible Furnace
16th International Conference on Mathematical Modelling and Analysis Sigulda, Latvia, 25-28 May 2011, Book of abstracts: 125 p | no |
J. Grečenkovs, M. Ščepanskis, A. Jakovičs, B. Nacke
Coupling of EM and HD Problems for Simulation of Industrial Melting Process
In the Book of Abstracts of the 16th International Conference on Mathematical Modelling and Analysis 2011, Sigulda, Latvia, p. 49 | no |
M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke
Development of solidParticle Library for the Modeling of Particle Transfer in EM Induced Turbulent Flows
In the Book of Abstracts and Selected Presentations of the International Scientific Workshop on Multiphysical Modelling in OpenFOAM, 2011, Riga, pp. 21-22 (abstract), pp. 103-106 (presentation) |
|
V. Geza, A. Jakovics, U. Krieger, B. Halbedel
Effectiveness of different approaches for EM force driven glass melt mixing in annular tube
Fundamental and applied MHD Borgo, 2011, vol. 2, pp. 879 883. | no |
U. Krieger, B. Halbedel, V. Geza, A. Jakovics, R. Iser
Homogenisierung der Glasschmelzen mittels Lorentzkraft aktuelle Ergebnisse
85. Glastechnische Tagung Saarbrücken, May 31 June 1 2011, p. 12. | no |
Baake E., Jakovics A., Pavlovs S., Kirpo M.
Influence of the channel design on the heat and mass exchange of induction channel furnace
COMPEL (The International Journal for Computation and Mathematics in Electrical and Electronic Engineering), 2011, Vol. 30, No. 5, pp. 16371650 | no |
S. Pavlovs, A. Jakovics, E. Baake, B. Nacke, M. Kirpo
LES modeling of turbulent flow, heat exchange and particle transport in industrial induction channel furnaces
Magnetohydrodynamics 2011, vol. 47, Nr. 4, pp. 399 412. | no |
A. Jakovics, S. Pavlovs, M. Kirpo, E. Baake
Long-term LES Study of Turbulent Heat and Mass Exchange in Induction Channel Furnaces with Various Channel Design
Fundamental and Applied MHD, Borgo, Corsica, France, 2011, vol. 1, pp. 283 288 |
|
J. Sennikovs, J. Virbulis, U. Bethers
Mathematical Model of the Baltic Artesian Basin
European Geosciences Union General Assembly 2011, Vienna, Austria, 03 08 April 2011 | no |
J. Grečenkovs, A. Jakovičs, S. Čertoks
Mathematical modelling for determination of heat transfer properties of building materials
Baltic Heat Transfer conference Tampere, August 24 26, 2011, pp. 34 - 35. | no |
S. Gendelis, A. Jakovičs, J. Kļaviņš
Mathematical modelling of heat balance and comfort conditions in a living-room with radiation source
Baltic Heat Transfer conference Tampere, August 24 26, 2011, pp. 36 37 | no |
V. Geža, A. Jakovics, U. Krieger, B. Halbedel
Modelling of electromagnetic heating and mixing conditions in glass melt output equipment
COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 2011, Vol. 30, Nr. 5, pp.1467 1478. | no |
S. Spitāns, A. Jakovičs, E. Baake, B. Nacke
Numerical Modeling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field
Magnetohydrodynamics, 47: 461-473 |
|
S. Spitāns, A. Jakovičs, B. Nacke, E. Baake
Numerical Modelling of Free Surface Dynamics of Conductive Fluid in Induction Crucible Furnace
University of Latvia 69 Scientific Conference Riga, Latvia, 1-4 February 2011 | no |
S. Spitāns, A. Jakovičs, B. Nacke, E. Baake
Numerical Modelling of Free Surface Dynamics of Melt in Induction Crucible Furnace
Fundamental and Applied MHD Borgo, France, 5-11 September 2011, conference proceedings: 677-681 p. |
|
M. Ščepanskis, A. Jakovičs, E. Baake and B. Nacke
Numerical solution of non-linear Lagrangian equation for inertial particles in turbulent flows
In the Book of Abstracts of the 16th International Conference on Mathematical Modelling and Analysis, Sigulda, Latvia, p. 115 | no |
A. Jakovics, V. Geza, B. Halbedel, U. Krieger
Numerische Modellierung der elektromagnetisch unterstuetzten Homogenisierung von Glasschmelzen im Auslauf einer Spezialschmelzanlage
85. Glastechnische Tagung Saarbrücken, May 31 June 1 2011, p. 13. | no |
V. Geza, A. Jakovics, R. Milenkovic, S. Dementjev, R. Kapulla
PIV validation of OpenFOAM turbulence models for LIMETS project water test section
Multiphysical modelling in OpenFOAM Riga, October 2011, pp. 41 42. | no |
A. Jakovics
Preface
Multiphysical modelling in OpenFOAM Riga, October 2011, pp. 13 14. | no |
M. Ščepanskis, A. Jakovičs, E. Baake
Statistical Analysis of the Influence of Forces on Particles in EM Driven Recirculated Turbulent Flows
Journal of Physics: Conference Series, 2011, vol. 333, 012015 |
|
A. Piliksere, M. Buike, A. Buikis
Steel Quenching Process as Hyperbolic Heat Equation for Cylinder
Proceeding of 6th Baltic Heat Transfer Conference BHTC2011, 2011, ISBN 978-952-15-2640-4 (CD-ROM) |
|
M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke
The Oscillations Appearing During the Process of Particle Homogenization in EM Induced Flow of ICF
In the Proceeding of the 8th International pamir Conference on Fundamental and Applied MHD, 2011, Borgo, Corsica, France, vol. 2, pp. 653 - 657 |
|
S. Spitāns, A. Jakovičs
Turbulence Model Effect on Heat Exchange Characteristics Through the Neutron Beam Window for European Spallation Source
COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30: 1651-1662 | no |
Павлов С. (Pavlov S.)
Системы высокопроизводительных вычислений в 20102011 годах: обзор достижений и анализ рынка (High-performance computing systems in 20102011: achievements review and market analysis)
CAD/CAM/CAE Observer, 2011, № 5, с. 7480; № 6, с. 7884; 2012, № 1, с. 7990 |
|
Павлов С. (Pavlov S.)
Системы электронного и электротехнического проектирования в 2010 году: обзор достижений и анализ рынка (Electronic Design Automation systems in 2010: achievements review and market analysis)
CAD/CAM/CAE Observer, 2011, № 7, с. 8291. |
|
Павлов С. (Pavlov S.)
Фондовый рынок высокотехнологичных компаний вышел из кризиса. Биржевые котировки акций лидеров рынков PLM, MCAE, EDA, CPU&GPU и HPC (High-tech companies' stock market passed crisis. PLM, MCAE, EDA, CPU&GPU and HPC market leaders stock prices)
CAD/CAM/CAE Observer, 2011, № 3, с. 9295 |
|
Павлов С. (Pavlov S.)
CAE-технологии в 2010 году: обзор достижений и анализ рынка (CAE technologies in 2010: achievements review and market analysis)
CAD/CAM/CAE Observer, 2011, № 4, с. 2030 |
|
|
|
