VTPMML
UNIVERSITY OF LATVIA
Laboratory for Mathematical Modelling
of Environmental and Technological Processes
LV

UK
News Staff Contacts Archive • meteo • klimats
Environmental processes
Technological processes
Other
ERAF
GORWIND
TEMPUS
KALME
Actual Projects
Finished Projects
Methodology
Software
Equipment
Years
Authors
In Latvia
International
MHD School 2019
MMP 2017
MEP 2014
OpenFOAM 2011
MMP 2010
PhD course 2010
MEP 2008 CD
MMP 2006

List of laboratory´s publications by year

2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 earlier

34 publications File
J. Grečenkovs, A. Jakovičs, S. Gendelis
3D Numerical Analysis of Heat Exchange in Building Structures with Cavities

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 163 - 168
A. Piliksere, A. Buikis
Analytical Solution for Intensive Quenching of Cylindrical Sample

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010
T.S. Lundstroem, V. Frishfelds, A. Jakovics
Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry

Composites: Part A: Applied science and manufacturing – 2010, vol. 41, pp. 83 – 92
no
S. Johansson, V. Geza, L.G. Westerberg, A. Jakovics
Characteristics of flow and temperature distribution in a ruthner process

International Scientific Colloquium "Modelling for Material Processing" – Riga, Latvia, 2010, pp. 317 – 322
V. Geza, A. Jakovics, U. Krieger, B. Halbedel
Conditions of EM forced laminar mixing in a special glass melter

Magnetohydrodynamics – 2010, Vol. 46, Nr. 4, pp. 449 - 460.
no
B. Halbedel, U. Kreiger, V. Geza, A. Jakovics, R. Iser
Elektromagnetische Stroemungsbeeinflussung in einer Spezialschmelzanlage – Prinzip, Auslegung und Ergebnisse

Elektropprozesstechnik – Ilmenau, TU Ilmenau, Germany, 2010, 15 pp
no
A. Jakovičs, S. Gendelis
Energoefektīvā realitāte Latvijā

Pārvaldnieks – 2010, Nr. 16, 20 – 23 lpp
M. Ščepanskis, A. Jakovičs, B. Nacke
Homogenization of Alloying Particles in Induction Crucible Furnaces

International Scientific Colloquium "Modelling for Material Processing" Riga, September 16-17, 2010, pp. 259 - 264
M. Ščepanskis, A. Jakovičs, B. Nacke
Homogenization of Non-conductive Particles in EM Induced Metal Flow in a Cylindrical Vessel

Magnetohydrodynamics, 2010, vol. 46, No. 4, pp. 413 – 423
no
V. Geza, U. Krieger, A. Jakovics, B. Halbedel
Influence of Material Properties on the Electromagnetic Homogenization of Glass Melt in the Special Melter

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 115 – 120
E. Baake, A. Jakovics, M. Kirpo
Influence of the channel design on the heat and mass exchange of induction channel furnace

Heating by electromagnetic sources – Padova, May 2010, pp. 155 – 162
no
B. Ubbenjans, Ch. Frank-Rotsch, J. Virbulis, B. Nacke, P. Rudolph
Influence of Ultrasonic Treatment on Crystal Growth From Melt

International Scientific Colloquium "Modelling for Material Processing" Riga, September 16-17, 2010
V. Frishfelds, T.S. Lundstroem, A. Jakovics
Lattice gas analysis of liquid front in non-crimp fabrics

Transport in porous media – 2010 19. pp. (published online 22.10.2009).
no
E. Baake, A. Jakovics, S. Pavlovs, M. Kirpo
Long-term computations of turbulent flow and temperature field in the induction channel furnace with various channel design

Magnetohydrodynamics – 2010, Vol. 46, Nr. 4, pp. 317–330
no
S. Gendelis, A. Jakovičs
Mathematical modelling of a living-room with a solar radiation source

Proceedings of the International forum-competition of young researchers "Topical Issues of Subsoil Usage". Working group "Energy saving and renewable energy", Volume II, pp. 186-188. April 21-23, 2010, St. Petersburg, Russia.
T. Sile, J. Virbulis, A. Timuhins, J. Sennikovs, U. Bethers
Modelling of Cavitation and Bubble Growth During Ultrasonic Cleaning Process

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010
P. Mannberg, K. Giannadakis, A. Jakovics, J. Varna
Moisture absorbtion and degradation of glass fiber/vinylester composites

International Scientific Colloquium "Modelling for Material Processing", Riga, Latvia, 2010, pp. 157 - 162
E. Baake, A. Jakovics, S. Pavlovs, M. Kirpo
Numerical Analysis of Turbulent Flow and Temperature Field in Induction Channel Furnace with Various Channel Design

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 253 - 258
S. Spitāns, A. Jakovičs, E. Baake, B. Nacke
Numerical Modeling of Free Surface Dynamics of Conductive Melt in the Induction Crucible Furnace

Magnetohydrodynamics, 46: 317-328
S. Spitans, A. Jakovics
Numerical modeling of turbulent flow in liquid metal target for European spallation source (ESS)

Heating by Electromagnetic Sources – Padua, Italy, 18-21 May 2010, conference proceedings: 225-232 p.
no
S. Gendelis, A. Jakovičs
Numerical Modelling of Airflow and Temperature Distribution in a Living Room with Different Heat Exchange Conditions

Latvian Journal of Physics and Technical Sciences, Volume 47, Number 4 (2010), pp. 27 – 43 (DOI: 10.2478/v10047-010-0016-z)
S. Spitans, A. Jakovics, E. Baake, B. Nacke
Numerical Modelling of Free Surface Dynamics of Melt in Induction Crucible Furnace (ICF)

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 247 – 252
V. Geza, A. Jakovics, B. Halbedel, U. Krieger
Optimisation of electromagnetic heating and mixing conditions in glass melt output equipment

Heating by electromagnetic sources – Padova, May 2010, pp. 565 – 572
no
V. Geza, R. Milenkovic, S. Dementjev, R. Kapulla, A. Jakovics
PIV Validation of Numerical Models for Turbulent Flows in a Water Test Section for Liquid Metal Target

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 279 - 284
A. Jakovics
Preface

International Scientific Colloquium "Modelling for Material Processing", Riga, Latvia, 2010, p. 13
M. Ščepanskis and A. Jakovičs
The Lagrangian particles in the EM driven turbulent flow with fine mesh (the treatment of solidParticle library in OpenFOAM)

Open source CFD International conference – Munich, Germany, 2010, 10 pp. (CD)
M. Ščepanskis, A. Jakovičs, B. Nacke, E. Baake
The Simulation of the Behaviour of the Alloying Admixture Particles in Induction Crucible Furnace

In the Proceeding of the International Symposium on Heating by Electromagnetic Sources, Padua, Italy, pp. 3 - 10 (2010)
M. Ščepanskis, A. Jakovičs, B. Nacke
The Simulation of the motion of Solid Particles in the Turbulent Flow of Induction Crucible Furnaces

In the Proceeding of the V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, Lisbon, Portugal (2010). 15 p. (CD).
S. Spitans, A. Jakovics
Turbulence Model Affect on Heat Exchange Characteristics Through the Beam Window for European Spallation Source

International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 139 – 144
Павлов С. (Pavlov S.)
"Наши САЕ-решения и стратегия их массового распространения увеличат не только нашу долю на рынке CAE, но и масштабы самого рынка". Интервью Павла Брука, директора по развитию бизнеса Autodesk в странах СНГ, Ближнего Востока и Африки (“Our CAE solutions and its mass delivery strategy will widen not only our market share, but also will increase CAE market capacity as a whole”. Interview with Pavel Bruk, EMEA Manufacturing Sales Development Manager at Autodesk)

CAD/CAM/CAE Observer, 2010, № 4, с. 34–38
Павлов С. (S. Pavlov)
В журнале появилась рубрика "Суперкомпьютеры и высокопроизводительные вычисления" (New rubric of Observer magazine – "High-performance computing & systems")

CAD/CAM/CAE Observer, 2010, № 2, с. 73
Павлов С. (Pavlov S.)
Системы высокопроизводительных вычислений в 2009–2010 годах: обзор достижений и анализ рынка (High-performance computing systems in 2009–2010: achievements review and market analysis)

CAD/CAM/CAE Observer, 2010, № 5, с. 84-92; № 8, с. 73-84
Павлов С. (Pavlov S.)
Системы электронного и электротехнического проектирования в 2009 году: обзор достижений и анализ рынка (Electronic Design Automation systems in 2009: achievements review and market analysis)

CAD/CAM/CAE Observer, 2010, № 6, с. 73-85
Павлов С. (Pavlov S.)
CAE-технологии в 2009 году: обзор достижений и анализ рынка (CAE technologies in 2009: achievements review and market analysis)

CAD/CAM/CAE Observer, 2010, № 4, с. 77–85