VTPMML -> Publications -> Authors

UNIVERSITY OF LATVIA
Laboratory for Mathematical Modelling
of Environmental and Technological Processes

News • Staff • Contacts • Archive • meteo • klimats

Research Branches

Environmental processes
Technological processes
Other

Major Projects

ERAF

GORWIND

TEMPUS
KALME

Actual Projects
Finished Projects

Products & Equipment

Methodology
Software
Equipment

Publications

Years
Authors

Collaboration Partners

In Latvia
International

Conferences & courses

MHD School 2019
MMP 2017
MEP 2014
OpenFOAM 2011
MMP 2010
PhD course 2010
MEP 2008 CD
MMP 2006

List of publications by authors

Year	404 publication(s) by A. Jakovičs:	File
2019	G. Baldinelli, F. Bianchi, S. Gendelis, A. Jakovics, G.L. Morini, S. Falcioni, S. Fantucci, V. Serra, M.A. Navacerrada, C. Díaz, A. Libbra, A. Muscio, F. Asdrubali Thermal conductivity measurement of insulating innovative building materials by hot plate and heat flow meter devices: A Round Robin Test International Journal of Thermal Sciences, 139, pp. 25-35.
2019	M. Sinka, D. Bajare, A. Jakovics, J. Ratnieks, S. Gendelis, J. Tihana Experimental testing of phase change materials in a warm-summer humid continental climate Energy and Buildings, Volume 195, 2019, p. 205-215, ISSN 0378-7788
2019	Pavlovs S., Jakovics A. Comparison of experimental and numerical velocity for electrovortex flow in multi-electrode furnace Proceedings of International Symposium on Heating by Electromagnetic Sources (HES-19), May 22–24, 2019, Padua, Italy, pp. 143–148
2019	Gendelis, S., Jakovičs, A. and Engelhardt, M. Thermal and moisture adsorption/desorption properties for a selection of vegetal insulation materials MATEC Web Of Conferences, 282, 02062. doi:10.1051/matecconf/201928202062
2019	Gendelis, S., Miķelsons, M., Jakovičs, A. and Bredovskis E. Calculation of cost-optimal combination of building materials and technical systems for nZEB single-family house using global cost calculation method MATEC Web of Conferences 282, 02070. doi.org/10.1051/matecconf/201928202070
2019	Telicko, J., Jakovics, A. and Drirkis I. A low-cost wireless sensor network for long term monitoring of energy performance and sustainability of buildings MATEC Web of Conferences 282, 02039. doi.org/10.1051/matecconf/201928202039
2019	Gendelis, S., Miķelsons, M., Jakovičs, A., Bredovskis, E. Comparative calculation of global and heating costs for nearly zero energy single-family building International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. Volume 19, Issue 6.2, 2019, Pages 417-424. 19th International Multidisciplinary Scientific Geoconference, SGEM 2019; Albena; Bulgaria; 30 June 2019 - 6 July 2019. DOI: 10.5593/sgem2019/6.2/S27.053
2019	J. Tihana, T. Odineca, A. Borodinecs, S. Gendelis, and A. Jakovics Optimal properties of external building envelope for minimization of over heating IOP Conference Series: Earth and Environmental Science, 390, p.012046
2018	Ratnieks, J., Jakovics, A., Gendelis, S. Wall assemblies U-value calculation in test buildings using constant power heating Energy Procedia, 147, 207-213. doi: 10.1016/j.egypro.2018.07.061
2018	Sinka, M., Bajare, D., Gendelis, S., Jakovics, A. In-situ measurements of hemp-lime insulation materials for energy efficiency improvement Energy Procedia, 147, 242-248. doi: 10.1016/j.egypro.2018.07.088
2018	S. Gendelis, A. Jakovics Analysis of the efficiency of non-traditional thermal insulation materials 18th International Multidisciplinary Scientific GeoConference SGEM 2018, www.sgem.org, SGEM2018 Conference Proceedings, ISBN 978-619-7408-52-2 / ISSN 1314-2704, 2 - 8 July, 2018, Vol. 18, Issue 6.3, 19-26 pp, DOI: 10.5593/sgem2018/6.3/S26.003
2018	S. Gendelis, M. Mikelsons, A. Jakovics Calculations of cost-optimal levels of energy performance requirements for renovated buildings and building elements: a Latvian case 18th International Multidisciplinary Scientific GeoConference SGEM 2018, www.sgemviennagreen.org, Conference Proceedings, ISBN 978-619-7408-71-3 / ISSN 1314-2704, 3 - 6 December, 2018, Vol. 18, Issue 6.4, 645-652 pp; DOI: 10.5593/sgem2018/6.4
2017	Pavlovs S., Jakovics A., Sushkovs V., Baake E. Influence of magnetic field on gas bubbles flow in liquid metal International Journal of Applied Electromagnetics and Mechanics (IJAEM), 2017, Vol. 53, No. S1, pp. S31–S41	no
2017	Pavlovs S., Jakovics A., Sushkovs V., Baake E. Gas bubbles and electrically conductive liquid turbulent flow in uniform magnetic field Magnetohydrodynamics, 2017, Vol. 53, No. 1, pp. 179–192	no
2017	Pavlovs S., Jakovics A., Sushkovs V., Baake E. LES-study of gas bubbles and liquid metal turbulent MHD-flow for different parameters Proceeding of the XVIII Congress UIE-2017, June 6–9, 2017, Hannover, Germany, 462–467 pp.
2017	V. Geža, A. Jakovičs, S. Gendelis, I. Usiļonoks, J. Timofejevs Thermal conductivity of disperse insulation materials and their mixtures IOP Conference Series: Materials Science and Engineering, vol. 251, p. 012012, Oct. 2017
2017	S. Spitans, H. Franz, E. Baake, A. Jakovics Large-scale Levitation Melting and Casting of Titanium Alloys Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 59-66
2017	J. Vencels, A. Jakovics, V. Geza Simulation of 3D MHD with Free Surface Using Open-source EOF-library Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 81-86
2017	V. Geža, A. Jakovičs, S. Gendelis, I. Usiļonoks Modeling of Granule Filling in Wall Gap for Estimation of Role of Thermal Convection Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 127-132
2017	S. Gendelis, A. Jakovičs, J. Ratnieks, L. Bandeniece Monitoring results and analysis of thermal comfort conditions in experimental buildings for different heating systems and ventilation regimes during heating and cooling seasons OP Conference Series: Materials Science and Engineering, vol. 251, p. 012053, Oct. 2017
2017	M. Birjukovs, A. Jakovičs, W. Holweger Modelling of Thermal Stresses in Bearing Steel Structure Generated by Electrical Current Impulses Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 201-208
2017	G. Zageris, V. Geza, A. Jakovics Numerical Investigation of Slag Formation in an Entrained-flow Gasifier Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 235-242
2017	V. Dzelme, M. Sarma, A. Jakovics, K. Thomsen Modelling of Rotating Permanent Magnet Induced Liquid Metal Stirring Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing", Riga, Latvia, (2017), pp. 301-306
2017	J. Ratnieks, S. Gendelis, A. Jakovics, D. Bajare Analyses of phase change materials’ efficiency in warm-summer humid continental climate conditions IOP Conference Series: Materials Science and Engineering, vol. 251, p. 012119, Oct. 2017
2017	S.Gendelis, A. Jakovičs, J. Ratnieks Thermal comfort condition assessment in test buildings with different heating/cooling systems and wall envelopes Energy Procedia, Volume 132, October 2017, Pages 153-158
2017	J. Ratnieks, A. Jakovičs, S. Gendelis Long term energy efficiency study on different wall envelopes in Latvian climate conditions Energy Procedia, Volume 132, October 2017, Pages 441-446
2017	S. Gendelis, A. Jakovics, J. Ratnieks Results of long-term energy efficiency monitoring of test buildings under real climatic conditions 17th International Multidisciplinary Scientific GeoConference SGEM 2017, www.sgemviennagreen.org, SGEM2017 Vienna GREEN Conference Proceedings, ISBN 978-619-7408-29-4 / ISSN 1314-2704, 27 - 29 November, 2017, Vol. 17, Issue 63, 643-650 pp; DOI: 10.5593/sgem2017H/63/S26.081
2016	S. Spitans, E. Baake, B. Nacke, A. Jakovics Numerical modeling of free surface dynamics of melt in an alternate electromagnetic field. Part II. Conventional electromagnetic levitation Metallurgical and materials transactions B – 2016, vol. 47 B, pp. 522 – 536.	no
2016	M. Scepanskis, A. Jakovics The magnetohydrodynamic force experienced by spherical iron particles in liquid metal Journal of magnetism and magnetic materials – 2016, vol. 403, pp. 30 – 35.	no
2016	S. Sakipova, A. Jakovics, S. Gendelis The Potential of Renewable Energy Sources in Latvia Latvian Journal of Physics and Technical Sciences. Volume 52, Issue 6, Pages 49–60, ISSN (Online) 0868-8257, DOI: 10.1515/lpts-2016-0001
2016	Pavlovs S., Jakovics A., Baake E., Sushkovs V. Influence of magnetic field on gas bubbles flow in liquid metal Heating by Electromagnetic Sources (HES-16) – Padua, May 2016, pp. 27–34.
2016	Pavlovs S., Jakovics A., Sushkovs V., Baake E. Gas bubbles and liquid metal flow in uniform external magnetic field The 10th PAMIR International Conference – Fundamental and Applied MHD – June 20–24, 2016, Cagliari, Italy, pp. ID19-1– ID19-5.
2016	A. Tatulcenkovs, A. Jakovics, E. Baake, B. Nacke Lattice Boltzmann modelling for multiphase bubble flow in electroconducting liquids Heating by Electromagnetic Sources (HES-16) – Padua, May 2016, pp. 35 - 41.	no
2016	S. Spitans, E. Baake, A. Jakovics Large scale electromagnetic levitation melting of metals Heating by Electromagnetic Sources (HES-16) – Padua, May 2016, pp. 43 - 50.	no
2016	V. Dzelme, M. Sarma, V. Geza, M. Scepanskis, A. Jakovics Transition of different vortical structures in rotating permanent magnets agitated flow: numerical and experimental neutron radiography investigation Fundamental and applied MHD – Cagliari, Italy, June 2016, pp. 252 – 256	no
2016	S. Spitans, E. Baake, A. Jakovics, H. Franz Numerical and experimenta investigations of large scale electromagnetic levitation melting of metals Fundamental and applied MHD – Cagliari, Italy, June 2016, pp. 366 – 370	no
2016	A. Tatulcenkovs, A. Jakovics, E. Baake, B. Nacke Numerical simulation of multiphase bubble flow in electroconducting liquids by lattice Boltzmann method Fundamental and applied MHD – Cagliari, Italy, June 2016, pp. 382 – 386	no
2016	V. Geza, A. Jakovics, B. Nacke Vortex merging in two demensinal recirculating flows: salt-water experiment and numerical simulations Fundamental and applied MHD – Cagliari, Italy, June 2016, pp. 441 – 445	no
2016	S. Pavlovs, A. Jakovics, V. Sushkovs, E. Baake Gas bubbles and liquid metal flow in uniform external magnetic field Fundamental and applied MHD – Cagliari, Italy, June 2016, 6 pp (electronic publication)	no
2015	W. Holweger, M. Wolf, D. Merk, T. Blass, M. Goss, J. Loos, S. Barteldes, A. Jakovics White etching crack root cause investigations Tribology transactions – 2015, Vol. 58, pp. 59 – 69.	no
2015	A. Jakovičs, I. Dimdiņa Energoefektivitātes monitoringa aktualitātes eksperimentālajās būvēs Latvijas būvniecība – 2015, Nr. 1, 96.-97. lpp.
2015	Pavlovs S., Jakovics A., Sushkovs V., Nacke B. LES-study of heat transfer in the melt for metallurgical MHD devices with power supply by inductor and over electrodes Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 67-81	no
2015	A. Jakovics, S. Gendelis, A. Laizans, D. Vardanjans Modelling of heat exchange in counterflow shell-type system Advanced Materials Research, Vol. 1117, pp 126-131, 2015. (doi:10.4028/www.scientific.net/AMR.1117.126)	no
2015	Gendelis, S., Jakovičs, A., Dzenis, T., Bandeniece, L. Analysis of Thermal Comfort Conditions and Actual Energy Efficiency for Different Heating Systems in Test Buildings In: Proceedings of REHVA Annual Conference 2015, Latvia, Rīga, 6-9 May, 2015. Riga: RTU PRESS, 2015, pp.89-94. ISBN 978-9934-10-685-9. e-ISBN 978-9934-10-717-7. (DOI: 10.7250/rehvaconf.2015.013)
2015	Apine, I., Orola, L., Jakovics, A. Effect of Building Envelope Materials on Indoor Air Quality in Low Energy Test Houses International Journal Of Environmental Science And Development, 6(12), 2015. pp. 952-957.(DOI: 10.7763/IJESD.2015.V6.728)
2015	V. Geza, B. Nacke, E.Baake, A.Jakovics Anisotropy of flow and transition between mixing regimes in a physical model of directional solidification Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 15–24
2015	Ozoliņš, A., Jakovičs, A., Gendelis S. Impact of Different Building Materials on Summer Comfort in Low-Energy Buildings Latvian Journal of Physics and Technical Sciences. Volume 52, Issue 3, Pages 44–57 (doi:10.1515/lpts-2015-0017)
2015	Sakipova, S., Jakovics, A., Gendelis, S. Analysis of energy supply from renewable sources considering the climate in Riga Proceedings of ECOS 2015: 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2015, Pau (France), 2015, 8 pp.
2015	Якович А., Гендель С., Сакипова С.Е. (A. Jakovičs, S. Gendelis, S. Sakipova) Otsenka energoeffektivnosti ispol'zovaniya teplovykh nasosov na osnove vozobnovlyayemykh istochnikov energii (Оценка энергоэффективности использования тепловых насосов на основе возобновляемых источников энергии) Proceedings “Chaos and structures in nonlinear systems. Theory and experiment” – 2015, Karaganda, pp. 314–319 (Материалы 9-й международной научной конференци "Хаос и структуры в нелинейных системах. Теория и эксперимент", 18-20 июня 2015 года, Караганда, стр. 314-319) (in Russian)
2015	Vardanjan, R., Laizans, A., Jakovics, A., Gendelis, S. Biogas specific heat capacity variations during upgrading Engineering for Rural Development. In 14th International Scientific Conference on Engineering for Rural Development 2015 (pp. 372-376). Jelgava, Latvia: Latvia University of Agriculture.
2015	S. Spitans, E. Baake, B. Nacke, A. Jakovics New technology for large scale electromagnetic levitation melting of metals Magnetohydrodynamics - 2015, Vol. 51, No. 1, pp. 121–132	no
2015	M. Scepanskis, E. Yu. Koroteeva, V. Geza, A. Jakovics Simulation of liquid metal flow induced by counter-rotating permanent magnets in a rectangular crucible Magnetohydrodynamics – 2015, Vol. 51, No. 1, pp. 37-44	no
2015	S. Spitans, E. Baake, A. Jakovics New technology for electromagnetic levitation melting of metals Applied mechanics and materials - 2015, Vol. 698, pp. 237–244	no
2015	M. Scepanskis, A. Jakovics, E. Baake, B. Nacke Molten salts cannot be used for the study of turbulent electromagnetically driven flows of liquid metal // Metallurgical and materials transactions B – 2015, vol. 46 B, Nr. 5, p. 2015 – 2017.	no
2015	M. Ščepanskis, A. Jakovičs, I. Kaldre, W. Holweger, B. Nacke, A. M. Diederichs The numerical model of electrothermal deformations of carbides in bearing steel as the possible cause of white etching cracks initiation Tribology letters – 2015, Vol. 59, Nr. 2, p. 1–10	no
2015	M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke A model for homogenization of solid alloying admixtures in an induction crucible furnace Steel Research International, 2015, Vol. 86, pp. 169-174	no
2015	M. Ščepanskis, A. Jakovičs, I. Kaldre, W. Holweger, B. Nacke A hypothesis on the electromagnetic cause of white etching cracks in bearing steel Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition. - Dallas, Texas, USA, 2015	no
2015	S. Spitans, E. Baake, B. Nacke, A. Jakovics Numerical modeling of free surface dynamics of melt in an alternate electromagnetic field. Part II. Conventional electromagnetic levitation Metallurgical and materials transactions B – 2015, vol. 46 B	no
2015	J. Ratnieks, A. Jakovics, S. Gendelis Transient Modelling of Thermal Conditions in Test Buildings Including Radiation Energy Procedia, Volume 78, November 2015, Pages 2905-2910, ISSN 1876-6102
2015	S. Sakipova, A. Jakovičs, S. Gendelis Studies Energy Efficiency of the Renewable Sources use Considering Climate in Latvia Energy Procedia, Volume 78, November 2015, Pages 1980-1984, ISSN 1876-6102
2015	S. Gendelis, A. Jakovičs, L. Bandeniece Experimental Research of Thermal Comfort Conditions in Small Test Buildings with Different Types of Heating Energy Procedia, Volume 78, November 2015, Pages 2929-2934, ISSN 1876-6102
2015	M. Scepanskis, M. Sarma, R. Nikoluskins, K. Thomsen, A. Jakovics, P. Vontobel, T. Beinerts, A. Bojarevics, E. Platacis A report on the first neutron radiography experiment for dynamic vizualization of solid particles in an intense liquid metal flow Magnetohydrodynamics - 2015, Vol. 51, No. 2, pp. 257–265	no
2015	M. Sarma, M. Scepanskis, A. Jakovics, K. Thomsen, R. Nikoluskins, P. Vontobel, T. Beinerts, A. Bojarevics, E. Platacis Neutron radiography visualization of solid particles in stirring liquid metal Physics procedia – 2015, Vol. 69, pp. 457–463	no
2015	M. Scepanskis, A. Jakovics A model for optimisation of homogenization process of solid alloying inclusions in an induction crucible furnace Proceedings of 9-th Int. conference on clean steel – Budapest, September 2015, 9 p (electronic publication)	no
2015	M. Scepanskis, A. Jakovics, T. Beinerts, R. Nikoluskins, K. Thomsen, P. Vontobel A new neutron radiography experimental technique for dynamic control of inclusions in electromagnetic induction melting and stirring equipment Proceedings of 9-th Int. conference on clean steel – Budapest, September 2015, 7 p (electronic publication)	no
2015	S. Spitans, E. Baake, A. Jakovics, H. Franz Numerical simulation of electromagnetic levitation in a cold crucible furnace Magnetohydrodynamics - 2015, Vol. 51, No. 3, pp.567-578	no
2015	Pavlovs S., Jakovics A., Sushkovs V., Nacke B. Numerical study of turbulent flow and thermal field in industrial electrotechnological devices with combined power supply Proceeding of the 8th International Conference on Electromagnetic Processing of Materials EPM’2015, October 12–16, 2015, Cannes, France, pp. 147–150
2015	Jakovics A., Pavlovs S., Baake E., Steinberg T., Sushkovs V., Tatulcenkovs A. Numerical study of gas bubbles collective dynamics in the melt influenced with magnetic field Proceeding of the 8th International Conference on Electromagnetic Processing of Materials EPM’2015, October 12–16, 2015, Cannes, France, pp. 183–186
2015	Jakovičs, A., Gendelis, S. & Bandeniece, L. Energy Efficiency and Sustainability of Different Building Structures in Latvian Climate IOP Conference Series: Materials Science and Engineering, vol. 96, p. 012032, 8 pp, Nov. 2015. online
2015	M. Scepanskis, A. Jakovics, K. Thomsen, T. Beinerts, M. Sarma, P. Vontobel, R. Nikoluskins, A. Bojarevics Dynamic neutron radiography for liquid metals applications 8th Int. conference on Electromagnetic processing of materials – Cannes, October 2015, p. 503 – 506.	no
2015	S. Spitans, E. Baake, A. Jakovics Electromagnetic levitation melting of metals on a large scale: simulation and experiments 8th Int. conference on Electromagnetic processing of materials – Cannes, October 2015, p. 583 - 586.	no
2014	A. Jakovičs, I. Dimdiņa, S. Gendelis Materiālu ietekme uz ēkas funkcionēšanu Latvijas Būvniecība – 2014. Nr. 4 (45), lpp. 60–64.
2014	Pavlovs S., Jakovics A., Baake E., Nacke B. LES-study of melt flow driven by combined inductive and conductive power supply in metallurgical MHD devices Fundamental and Applied MHD, Thermo Acoustic and Space Technologies (Proceedings of the 9th PAMIR International Conference, June 16–20, 2014, Riga, Latvia), 2014, Vol. 1, pp. 289–293.
2014	A. Jakovics, S. Pavlovs Computational modeling of induction melting and experimental verification ASM Handbook, Vol. 4c, Induction heating and heat treatment – 2014, ASM International, pp. 416 – 446.	no
2014	A. Jakovics, S. Pavlovs Melting of glasses and oxides ASM Handbook, Vol. 4c, Induction heating and heat treatment – 2014, ASM International, pp. 535 - 547.	no
2014	Baake E., Barglik J., Jakovics A., Khatsayuk M., Lupi S., Nikanorov A., Pavlov E., Pavlovs S., Pervukhin M., Timofeyev S., Timofeyev V. (Баке Э., Барглик Д., Лупи С., Никаноров А., Павлов Е., Павлов С., Первухин М., Тимофеев В., Тимофеев С., Хацаюк М., Якович А.) MHD technologies in metallurgy. Intensive Course Specific IV. (МГД технологии в металлургии. Интенсивный курс Специализация IV.) Sankt Petersburg: Publishing house of ETU, 2013, 233 p., ISBN 978-5-7629-1410-9 (Санкт-Петербург: Издательство СПбГЭТУ "ЛЭТИ", 2013, 250 с., ISBN 978-5-7629-1422-2)	no
2014	A. Ozolins, A. Jakovics Thermal comfort in summer in low energy buildings Proceedings of the Proceedings of the 10th Nordic Symposium on Building Physics, Lund, Sweden,15-19 June 2014, pp. 782-789
2014	J. Ratnieks, A. Jakovičs, S. Gendelis Mathematical modeling of airflow velocity and temperature fields for experimental test houses Proceedings of the Proceedings of the 10th Nordic Symposium on Building Physics, Lund, Sweden,15-19 June 2014, pp. 871-878
2014	A. Ozolins, A. Jakovics Moisture and frost risks for different external walls of test houses under Latvian climate conditions Proceedings of the Proceedings of the 10th Nordic Symposium on Building Physics, Lund, Sweden,15-19 June 2014, pp. 1108-1115
2014	Спитан С., Бааке Э., Якович А., Павлов С. (Spitans S., Baake E., Jakovics A., Pavlov S.) Новый подход к сопряженному моделированию физических процессов при проектировании электротехнологических установок для получения сверхчистых сплавов (A new approach for coupled simulation of physical processes for design of electrotechnological setups for melting of high purity alloys) CAD/CAM/CAE Observer, 2014, № 5, с. 73–80
2014	A. Jakovics, S. Sakipova, K. Kussaiynov, Zh. Kambarova, Ye. Kussaiynov Development of autonomous energy supply system using a sail type wind turbine Advances in environmental sciences – Santorini, July 2014, pp. 62 – 66
2014	A. Jakovics, S. Gendelis, A. Ozolins, S. Sakipova Energy efficency and sustainability of low energy houses in Latvian climate conditions Advances in environmental sciences – Santorini, July 2014, pp. 109 – 113
2014	V. Geza, R. Z. Milenkovic, R. Kapulla, S. Dementjevs, A. Jakovics, M. Wohlmuther Computational and experimental studies of the flow field near the beam entrance window of a liquid metal target Nuclear engineering and design – 2014, Vol. 275, pp. 96 – 106	no
2014	Zin. red.: Andris Jakovičs Būvkonstrukciju energoefektivitāte un ilgtspēja Latvijas klimatā Rīga, 2014. ISBN 978-9934-517-15-0, UDK 69(474.3):551.5
2014	Pavlovs S., Jakovics A., Baake E., Nacke B., Sushkovs V. Numerical modelling of melt circulation in industrial-size furnaces with power supply by inductor and over electrodes International Scientific Colloquium “Modelling for Electromagnetic Processing”. Hannover (German), September 16–19, 2014, pp. 363–369
2014	V. Geza, B. Nacke, E. Baake, A. Jakovics Influence of the Richardson number on EM force driven flow structures in square-shaped crucible Journal of crystal growth – 2014, Vol. 401, pp. 895 – 898.	no
2014	S. Spitans, E. Baake, A. Jakovics A new approach for coupled simulation of liquid metal flow, free surface dynamics and electromagnetic field in induction furnaces Heat processing – 2014, Nr. 1, pp. 79 – 85	no
2014	S. Spitans, E. Baake, B. Nacke, A. Jakovics A numerical model for coupled free surface and liquid metal flow calculation in electromagnetic field Int. journal of applied electromagnetic and mechanics – 2014, vol. 44, pp. 171- 182	no
2014	A. Jakovičs, S. Gendelis, A. Ozoliņš u.c. Latvijas zinātnieki atklājuši Latvijas klimatam piemērotākos celtniecības blokus (A. Jakoviča, S. Gendeļa, A. Ozoliņa u.c. pētījumu rezultātu apskats) Latvijas būvniecība – 2014, Nr. 2, 86 – 87 lpp.	no
2014	M. Scepanskis, A. Jakovics, E. Baake, B. Nacke Solid inclusions in an electromagnetically induced recirculated turbulent flow: Simulation and experiment Int. journal of multiphase flow – 2014, vol. 64, pp. 19 – 27	no
2014	M. Scepanskis, R. Nikoluskins, A. Bojarevics, T. Beinerts, V. Geza, A. Jakovics, K. Thomsen Liquid metal flow induced by counter-rotating permanent magnets in a rectangular crucible Fundamental and Applied MHD, Thermo Acoustic and Space Technologies (Proceedings of the 9th PAMIR International Conference, June 16–20, 2014, Riga, Latvia), 2014, Vol. 1, pp. 278 – 282	no
2014	V. Geza, E. Baake, B. Nacke, A. Jakovics Anisotropy of flow and transition between mixing regimes in stratified EM force generated flow Fundamental and Applied MHD, Thermo Acoustic and Space Technologies (Proceedings of the 9th PAMIR International Conference, June 16–20, 2014, Riga, Latvia), 2014, Vol. 2, pp. 214	no
2014	S. Spitans, E. Baake, A. Jakovics, H. Franz Numerical simulation of electromagnetic levitation in a cold crucible furnace Fundamental and Applied MHD, Thermo Acoustic and Space Technologies (Proceedings of the 9th PAMIR International Conference, June 16–20, 2014, Riga, Latvia), 2014, Vol. 2, pp. 256 - 260	no
2014	S. Spitans, E. Baake, B. Nacke, A. Jakovics 3D LES two-phase flow simulation of conventional electromagnetic levitation melting experiment Fundamental and Applied MHD, Thermo Acoustic and Space Technologies (Proceedings of the 9th PAMIR International Conference, June 16–20, 2014, Riga, Latvia), 2014, Vol. 2, pp. 261 – 265	no
2014	A. Tucs, S. Spitans, A. Jakovics, E. Baake Numerical modeling of gas bubble dynamics in liquid metal in applied DC magnetic field Fundamental and Applied MHD, Thermo Acoustic and Space Technologies (Proceedings of the 9th PAMIR International Conference, June 16–20, 2014, Riga, Latvia), 2014, Vol. 2, pp. 266 – 270	no
2014	L. Blacha, S. Golak, A. Jakovics, A. Tucs Kinetic analysis of aluminum evaporation from the Ti-6Al-7Nb alloy Archives of metallurgy and materials – 2014, Vol. 59, Nr. 1, pp. 275 – 279	no
2014	A. Jakovics, S. Gendelis , J. Ratnieks, S. Sakipova Monitoring and Modelling of Energy Efficiency for Low Energy Testing Houses in Latvian Climate Conditions International Journal of Energy, 2014 (8): 76-83 (ISSN: 1998-4316)
2014	Sakipova S.E., Jakovics A., Gendelis S., Kambarova Zh.T., Kussaiynov Ye.K. Development a Sail Type Wind Turbine for Autonomous Energy Supply According Climate Conditions Eurasian Physical Technical Journal, 2014, Vol. 11, No. 2 (22), pp. 3-11
2014	Beinarts, I., Grunde, U., Jakovics, A. Distributed Multi-Sensor Real-Time Building Environmental Parameters Monitoring System with Remote Data Access Electrical, Control and Communication Engineering. Vol.7, 2014, pp.41-46. ISSN 2255-9140. e-ISSN 2255-9159 (DOI: 10.1515/ecce-2014-0022))
2014	Sakipova, S., Jakovics, A. Sail-Type Wind Turbine for Autonomous Power Supplay: Possible Use in Latvia Latvian journal of physics and technical sciences – 2014, Nr. 6, pp. 13 - 25. (doi:10.1515/lpts-2014-0033)
2014	Kazjonovs, J., Sipkevics, A., Jakovics, A., Dancigs, A., Bajāre, D., Dancigs, L. Performance Analysis of Air-to-Water Heat Pump in Latvian Climate Conditions Environmental and Climate Technologies. Nr.14, 2014, 18.-22.lpp. ISSN 1691-5208. e-ISSN 2255-8837. (doi:10.1515/rtuect-2014-0009)
2014	S. Pavlovs, A. Jakovics, E. Baake, B. Nacke Melt flow patterns in metallurgical MHD devices with combined inductive and conductive power supply Magnetohydrodynamics - 2014, Vol. 50, No. 3, pp. 303–315	no
2013	S. Spitans, A. Jakovics, E. Baake, B. Nacke Numerical modelling of free surface dynamics of melt in an alternate electromagnetic field. Part I. Implementation and verification of model Metallurgical and Materials Transactions B – 2013, Vol. 44, Nr. 3, pp. 593 – 605.	no
2013	Pavlovs S., Jakovics A., Bosnyaks D., Nacke B., Baake E. Anomalies of Joule heat, thermal and turbulent flow fields in clogged industrial channel induction furnaces Heating by Electromagnetic Sources (HES-13) – Padua, May 2013, pp. 29 – 36.	no
2013	J. Ratnieks, A. Jakovičs, S. Gendelis Stationary Heat Transfer and Airflow Simulation for Test Polygon Houses In: CYSENI 2013, 10th International Conference of Young Scientists on Energy Issues, Kaunas, Lithuania, May 29–31, 2013. p. VI-382-389 (CD).
2013	Dimdiņa, I., Jakovičs, A., Gendelis, S., Kļaviņš, J. Testing of Energy-Efficient Building Envelope Materials in Natural Conditions In: World Sustainable Energy Days 2013: International Conference (WSED 2014), Austria, Wels, 27 Feb-1 Mar., 2013. Wels: 2013, pp.1-5.
2013	S. Certoks, S. Gendelis, A. Jakovics, J. Klavins Mathematical Modelling of Heat Transfer Properties for Perforated Ceramic Blocks Proceedings of the 11th REHVA World Congress & 8th International Conference on IAQVEC - CLIMA 2013 "Energy efficient, smart and healthy buildings", Prague, Czech Republic, June 16–19, 2013, 10 p. (CD).
2013	I. Dimdiņa, A. Jakovičs, S. Gendelis, J. Kļaviņš A Testing Ground for Measuring Influence of Building Envelope Materials on Energy Efficiency and Indoor Environment In: Proceedings of CLIMA 2013, Czech Republic, Prague, 16-19 June, 2013. Praha: Society of Environmental Engineering (STP), REHVA member association, 2013, pp.1-10. ISBN 9788026040019.
2013	A. Ozolins, A. Jakovics, J. Ratnieks, S. Gendelis Numerical Modelling of Humidity and Temperature Conditions in Buildings with Different Boundary Structures Proceedings of the 11th REHVA World Congress & 8th International Conference on IAQVEC - CLIMA 2013 "Energy efficient, smart and healthy buildings", Prague, Czech Republic, June 16–19, 2013, 10 p. (CD).
2013	J. Džeriņš, I. Dimdiņa, S. Gendelis, A. Jakovičs HeatMod6 – Web-Based Application for Building Heat Balance Calculation In: 11th REHVA World Congress and the 8th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Proceedings of CLIMA 2013, Czech Republic, Prague, 16-19 June, 2013. Prague: Society of Environmental Engineering (STP), REHVA member association, 2013, pp.1-9. ISBN 9788026040019.
2013	M. Ščepanskis, A. Jakovičs, E. Baake and B. Nacke Experimental and LES-based Euler-Lagrange Numerical Investigation of the Particle Laden EM Induced Recerculated Turbulent Flow Class In the proceeding of the 8th International Conference on Multiphase Flow (digitally published), 2013, Jeju, Korea
2013	S. Gendelis, A. Jakovičs, A. Nitijevskis, J. Ratnieks Comparison of different air tightness and air exchange rate measurements in very small test buildings In: 34th AIVC conference: Energy conservation Technologies for mitigation and adaptation in the built environment – Athens, September 2013, 8 pp.
2013	A. Ozolinsh, A. Jakovich Risk of Condensate Formation and Mould Growth in Buildings under Latvian Climate Conditions (DOI: 10.2478/lpts-2013-0032) Latvian journal of physics and technical sciences – 2013, Nr. 5, p. 44 - 53.
2013	A. Jakovics, I. Dimdiņa, S. Gendelis Ārējo konstrukciju materiālu ietekme uz ēkas energoefektivitāti ekspluatācijas sākuma posmā Latvijas būvniecība – 2013, Nr. 6, lpp. 84 – 86.
2013	M. Greitans, U. Grunde, A. Jakovics, S. Gendelis Web-Based Real-Time Data Acquisition System as Tool for Energy Efficiency Monitoring 21-st Telecomunications forum (TELFOR) – Belgrade, November 2013, pp. 553 – 556.
2013	S. Spitans, E. Baake, A. Jakovics A new approach for coupled simulation of liquid metal flow, free surface dynamics and electromagnetic field in induction furnaces Elektrowaerme international – 2013, Nr. 4, pp. 55 – 61.	no
2013	A. Tucs, S. Spitans, A. Jakovics, E. Baake Implementation and verification of numerical model for gas bubble dynamics in electroconductive fluid 11th Int. Conference of numerical analysis and applied mathematics proceedings – Rhodes, September 2013, p. 86 – 89.	no
2013	A. Ozolins, A. Jakovics Risks of mould growth in different building structures Innovative materials, structures and technologies – Riga, November 2013, p. 38.	no
2013	A. Tucs, S. Spitans, A. Jakovics, E. Baake Implementation and verification of numerical model for gas bubble dynamics in electroconductive fluid Liquid metal MHD – Bad Honnef, October, 2013, p. 52.	no
2013	S. Spitans, E. Baake, B. Nacke, A. Jakovics New technology for electromagnetic levitation melting of metals Liquid metal MHD – Bad Honnef, October, 2013, p. 61.	no
2013	E. Baake, S. Spitans, A. Jakovics New technology for electromagnetic levitation melting of metals Heating by electromagnetic sources – Padua, May 2013, Addendum, pp. 1 - 8.	no
2013	A. Tucs, S. Spitans, A. Jakovics, E. Baake, B. Nacke Implementation and verification of numerical model for gas bubble dynamics in electroconductive fluid Heating by electromagnetic sources – Padua, May 2013, pp. 623 - 630.	no
2013	S. Spitans, E. Baake, B. Nacke, A. Jakovics Development, verification and application of numerical model for coupled free surface and liquid metal flow calculation in EM field Heating by electromagnetic sources – Padua, May 2013, pp. 279 – 286.	no
2013	E. Baake, A. Jakovics Unterstützung und Verbesserung des Betriebsverhaltens von Induktionsrinnenöfen durch Anwendung der Computersimulation Gießerei – 2013, vol. 100, Nr. 5, S 30 – 35.
2013	Aliferov A., Barglik J., Forzan M., Goreva L., Jakovics A., Lupi S., Pavlovs S. (Алиферов А.И., Барглик Д., Горева Л.П., Лупи С., Павлов С., Форцан М., Якович А.) Theory and practice of application of arc furnaces. Intensive Course Speccourse II (Теория и практика применения дуговых печей. Интенсивный курс Специализация II) Sankt Petersburg: Publishing house of ETU, 2013, 234 p., ISBN 978-5-7629-1406-2 (Санкт-Петербург: Издательство СПбГЭТУ “ЛЭТИ”, 2013, 234 с., ISBN 978-5-7629-1418-5)	no
2013	Aliferov A., Baake E., Barglik J., Bikeev R., Bressan F., Di Barba P., Forzan M., Goreva L., Jakovics A., Lupi S., Nacke B., Nikanorov A., Pavlovs S., Pleshivtseva Yu., Rapoport E., Smalcerz A., Spitans S. (Алиферов А.И., Бааке Э., Барглик Д., Бикеев Р.А., Брессан Ф., Ди Барба П., Горева Л.П., Лупи С., Наке Б., Никаноров А., Павлов С., Плешивцева Ю.Э., Рапопорт Э.Я., Optimization and control systems in electrotechnologies. Intensive Course Specific III (Оптимизация и управление электротехнологическими системами. Интенсивный курс Специализация III) Sankt Petersburg: Publishing house of ETU, 2013, 244 p., ISBN 978-5-7629-1408-6 (Санкт-Петербург: Издательство СПбГЭТУ “ЛЭТИ”, 2013, 266 с., ISBN 978-5-7629-1420-8)	no
2013	A. Tucs, S. Spitans, A. Jakovics, E. Baake Implementation and verification of numerical model for gas bubble dynamics in electroconductive fluid AIP Conference proceedings – 2013. Vol. 1558, pp. 86 – 89.	no
2013	S. Spitans, A. Jakovics, E. Baake, B. Nacke Development, verification and application of numerical model for coupled free surface and liquid metal flow calculation in EM field Computational methods in multiphase flow VII. WIT Transactions on engineering sciences – 2013, Vol. 79, pp. 49 – 61.	no
2013	1. Nacke B., Baake E., Lupi S., Dughiero F., Forzan M., Barglik J., Dolega D., Jakovics A., Pavlovs S., Aliferov A. Theoretical background and aspects of electrotechnologies. Mathematical simulation and optimization methods. Intensive Course Basic II St. Petersburg: Publishing house of ETU, 2013, 348 p. (in English and Russian).	no
2012	S. Pavlovs, A. Jakovics, D. Bosnjaks, E. Baake, B. Nacke Turbulet flow, heat and mass exchange in industrial induction channel furnaces with various channel design, iron yoke position and clogging Energy efficient electrotechnologies, Proceedings of the XVII UIE Congress – St. Petersburg, 2012, p. 60 - 67	no
2012	M. Ščepanskis, A. Jakovičs, B. Nacke and E. Baake Redistribution of solid inclusions in the turbulent flows of metallurgical induction furnaces. In the Proceeding of the 7th International Symposium on Turbulence, Heat and Mass Transfer (full paper on CD), 2012, Palermo, Sicily, Italy. Short paper is published in book “Turbulence, Heat and Mass Transfer 7” ed. by K. Hanjalić, Y. Nagano, D. Borello, S. Jakirlić, Begell House Inc., New York, Wallingford (UK), 2012, pp. 1123 – 1126.
2012	M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke Numerical analysis and experimental verification of the behaviour of solid inclusions in induction crucible furnaces Journal of iron and steel research international – 2012, vol. 19, suppl. 1, p. 713 - 716.
2012	M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke Analysis of the oscillating behavior of solid inclusions in induction crucible furnaces Magnetohydrodynamics – 2012, Vol. 48, Nr. 4, pp. 503 - 512.	no
2012	A. Jakovics, S. Pavlovs, D. Bosnaks, S. Spitans, E. Baake, B. Nacke Influence of channel ad yoke design and clogging on turbulent flow and heat exchange in induction channel furnaces Journal of iron and steel research international – 2012, vol. 19, suppl. 1, p. 749 - 753.	no
2012	S. Spitans, A. Jakovics, E. Baake, B. Nacke Numerical modelling of free surface dynamics of melt in alternate electromagnetic field Journal of iron and steel research international – 2012, vol. 19, suppl. 1, p. 531 – 535.	no
2012	Nacke B., Baake E., Lupi S., Dughiero F., Forzan M., Barglik J., Smalcerz A., Dolega D., Jakovics A., Pavlovs S., Aliferov A., Goreva L. (Алиферов А.И., Бааке Э., Барглик Д., Галунин С.А., Горева Л.П., Долега Д., Дугиеро Ф., Лупи С., Наке Б., Павлов С., Печенков А.Ю., Смальцеж А., Форцан М., Якович А.) Theoretical background and aspects of electrotechnologies. Physical principles and realization. Intensive Course Basic I (Теоретические основы и аспекты электротехнологий. Физические принципы и реализация. Интенсивный курс Основы I) St. Petersburg: Publishing house of ETU, 2012, 356 p., ISBN 978-5-7629-1237-2 (Санкт-Петербург: Издательство СПбГЭТУ “ЛЭТИ”, 2013, 359 с., ISBN 978-5-7629-1412-3)	no
2012	J. Ratnieks, A. Jakovičs, J. Kļaviņš Development of Mathematical Model for Determining Sound Reduction Index of Building Elements Comsol konference Štutgartē 2011. g., CD
2012	S. Čertoks, S. Gendelis, A. Jakovičs, J. Kļaviņš Mathematical modelling of ceramic block heat transfer properties Proceedings of the 3rd International Conference "Advanced construction", October 18-19, 2012, Kaunas, Lithuania, p. 90 – 97.
2012	I. Dimdiņa, S. Gendelis, A. Jakovičs Eksperimentālo stendu energoefektivitātes un telpu mikroklimata monitoringa projekts Latvijas būvniecība – 2012, Nr. 6, 84.-86.lpp.
2012	Dimdiņa, I., Jakovičs, A., Gendelis, S., Džeriņš, J. Influence of Unconditioned Spaces on the Energy Efficiency Calculation of Buildings In: Riga Technical University 53rd International Scientific Conference : Dedicated to the 150th Anniversary and the 1st Congress of World Engineers and Riga Polytechnical Institute / RTU Alumni: Digest, Latvia, Riga, 11-12 October, 2012. Riga: RTU, 2012, pp.411-411. ISBN 9789934103605.
2012	T. Dzenis, S. Gendelis, A. Jakovičs Research of composite constructions’ impact on the energy efficiency of buildings Proceedings of the 3rd International Conference "Advanced construction", October 18-19, 2012, Kaunas, Lithuania, p. 183 - 191.
2012	zin. redaktors A. Jakovičs Rīgas jūras līcis – vēja enerģijas resurss: GORWIND projekts (zin. redaktors A. Jakovičs) Latvijas Universitāte, 2012, 43 lpp.	no
2012	A. Ozolins, A. Jakovics Heat and moisture transfer in the multi-layer walls: interaction and influence on the heat losses in the circumstances of changeable external temperature Latvian journal of physics and technical sciences – 2012, Nr. 6, p. 32 – 43.
2012	M. Ščepanskis, A. Jakovičs, M. Brics, E. Baake, B. Nacke Simulation of Growth and Transportation of Solid Inclusions in Inductions Furnaces In the Proceeding of the 8th International Conference on Clean Steel (on CD), 2012, Budapest, Hungary. In the Book of Abstracts: p. 26.
2012	S. Spitāns, A. Jakovičs, B. Nacke, E. Baake Numerical Modelling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field University of Latvia 70 Scientific Conference – Riga, Latvia, 1-3 February 2012	no
2012	S. Spitāns, A. Jakovičs, B. Nacke, E. Baake Numerical Modelling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field XVII Congress UIE – St. Petersburg, Russian Federation, 21-25 May 2012, Electronic Conference Proceedings
2012	S. Spitāns, A. Jakovičs, B. Nacke, E. Baake Numerical Modelling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field 7th International Conference on Electromagnetic Processing of Materials – Beijing, China, 22-26 October 2012
2012	A. Jakovičs, S. Pavlovs, D. Bosņaks, S. Spitāns Influence of Channel and Yoke Design and Clogging on Turbulent Flow and Heat Exchange in Induction Channel Furnaces 7th International Conference on Electromagnetic Processing of Materials – Beijing, China, 22-26 October 2012
2012	Pavlovs S., Jakovics A., Baake E., Nacke B. LES long-term analysis of particles transport in melt turbulent flow for industrial induction channel furnaces Proceeding of 8th International Conference on Clean Steel, May 14–16, 2012, Budapest, Hungary, 12 p. (CD)
2012	Pavlovs S., Jakovics A., Bosnyaks D., Baake E., Nacke B. Turbulent flow, heat and mass exchange in industrial induction channel furnaces with various channel design, iron yoke position and clogging Proceeding of the XVII Congress UIE-2012, May 21–25, 2012, Saint Petersburg, Russia, 8 p. (CD)
2012	A. Jakovičs, I. Dimdiņa Eksperimentāla būvrisinājumu testēšana Latvijas būvniecība – 2012, Nr. 3, 90. lpp.
2012	J. Ratnieks, A. Jakovičs, J. Kļaviņš A Numerical Model for Determination of the Airborne Sound Reduction Index of Porous Constructions Latvian Journal of Physics and Technical Sciences, 2012, N3, pp. 47 - 56
2012	S. Spitans, A. Jakovics, E. Baake, B. Nacke Numerical modelling of free surface dynamics of melt in an alternate electromagnetic field Energy efficient electrotechnologies, Proceedings of the XVII UIE Congress – St. Petersburg, 2012, p. 175 - 182.	no
2011	M. Ščepanskis, A. Jakovičs, E. Baake and B. Nacke Numerical solution of non-linear Lagrangian equation for inertial particles in turbulent flows In the Book of Abstracts of the 16th International Conference on Mathematical Modelling and Analysis, Sigulda, Latvia, p. 115	no
2011	J. Grechenkovs, A. Jakovich and S. Gendelis 3D Numerical Analysis of Heat Exchange in Building Structures with Cavities Latvian Journal of Physics and Technical Sciences, Volume 48, Number 1 / 2011 , pp. 3 - 12 (DOI: 10.2478/v10047-011-0001-1)
2011	M. Ščepanskis, A. Jakovičs, E. Baake Statistical Analysis of the Influence of Forces on Particles in EM Driven Recirculated Turbulent Flows Journal of Physics: Conference Series, 2011, vol. 333, 012015
2011	M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke The Oscillations Appearing During the Process of Particle Homogenization in EM Induced Flow of ICF In the Proceeding of the 8th International pamir Conference on Fundamental and Applied MHD, 2011, Borgo, Corsica, France, vol. 2, pp. 653 - 657
2011	M. Ščepanskis, A. Jakovičs, E. Baake, B. Nacke Development of solidParticle Library for the Modeling of Particle Transfer in EM Induced Turbulent Flows In the Book of Abstracts and Selected Presentations of the International Scientific Workshop on Multiphysical Modelling in OpenFOAM, 2011, Riga, pp. 21-22 (abstract), pp. 103-106 (presentation)
2011	J. Grečenkovs, M. Ščepanskis, A. Jakovičs, B. Nacke Coupling of EM and HD Problems for Simulation of Industrial Melting Process In the Book of Abstracts of the 16th International Conference on Mathematical Modelling and Analysis 2011, Sigulda, Latvia, p. 49	no
2011	S. Spitāns, A. Jakovičs Turbulence Model Effect on Heat Exchange Characteristics Through the Neutron Beam Window for European Spallation Source COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30: 1651-1662	no
2011	S. Spitāns, A. Jakovičs, E. Baake, B. Nacke Numerical Modeling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field Magnetohydrodynamics, 47: 461-473
2011	S. Spitāns, A. Jakovičs, B. Nacke, E. Baake Numerical Modelling of Free Surface Dynamics of Conductive Fluid in Induction Crucible Furnace University of Latvia 69 Scientific Conference – Riga, Latvia, 1-4 February 2011	no
2011	S. Spitāns, A. Jakovičs, B. Nacke, E. Baake Coupled Electromagnetic and Hydrodynamic Numerical Calculation of Free Surface Dynamics of Melt in Induction Crucible Furnace 16th International Conference on Mathematical Modelling and Analysis – Sigulda, Latvia, 25-28 May 2011, Book of abstracts: 125 p	no
2011	S. Spitāns, A. Jakovičs, B. Nacke, E. Baake Numerical Modelling of Free Surface Dynamics of Melt in Induction Crucible Furnace Fundamental and Applied MHD – Borgo, France, 5-11 September 2011, conference proceedings: 677-681 p.
2011	U. Krieger, B. Halbedel, V. Geza, A. Jakovics, R. Iser Homogenisierung der Glasschmelzen mittels Lorentzkraft – aktuelle Ergebnisse 85. Glastechnische Tagung – Saarbrücken, May 31 – June 1 2011, p. 12.	no
2011	A. Jakovics, V. Geza, B. Halbedel, U. Krieger Numerische Modellierung der elektromagnetisch unterstuetzten Homogenisierung von Glasschmelzen im Auslauf einer Spezialschmelzanlage 85. Glastechnische Tagung – Saarbrücken, May 31 – June 1 2011, p. 13.	no
2011	L.G. Westerberg, V. Geza, A. Jakovics, T.S. Lundström Burner Backflow reduction in regeneration furnace Engineering Applications of Computational Fluid Mechanics – 2011, Vol. 5, Nr. 3, pp. 372 - 383.	no
2011	S. Gendelis, A. Jakovičs, J. Kļaviņš Mathematical modelling of heat balance and comfort conditions in a living-room with radiation source Baltic Heat Transfer conference – Tampere, August 24 – 26, 2011, pp. 36 – 37	no
2011	J. Grečenkovs, A. Jakovičs, S. Čertoks Mathematical modelling for determination of heat transfer properties of building materials Baltic Heat Transfer conference – Tampere, August 24 – 26, 2011, pp. 34 - 35.	no
2011	A. Jakovics, S. Pavlovs, M. Kirpo, E. Baake Long-term LES Study of Turbulent Heat and Mass Exchange in Induction Channel Furnaces with Various Channel Design Fundamental and Applied MHD, Borgo, Corsica, France, 2011, vol. 1, pp. 283 – 288
2011	V. Geza, A. Jakovics, U. Krieger, B. Halbedel Effectiveness of different approaches for EM force driven glass melt mixing in annular tube Fundamental and applied MHD – Borgo, 2011, vol. 2, pp. 879 – 883.	no
2011	A. Jakovics Preface Multiphysical modelling in OpenFOAM – Riga, October 2011, pp. 13 – 14.	no
2011	V. Geza, A. Jakovics, R. Milenkovic, S. Dementjev, R. Kapulla PIV validation of OpenFOAM turbulence models for LIMETS project water test section Multiphysical modelling in OpenFOAM – Riga, October 2011, pp. 41 – 42.	no
2011	V. Geža, A. Jakovics, U. Krieger, B. Halbedel Modelling of electromagnetic heating and mixing conditions in glass melt output equipment COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering – 2011, Vol. 30, Nr. 5, pp.1467 – 1478.	no
2011	Baake E., Jakovics A., Pavlovs S., Kirpo M. Influence of the channel design on the heat and mass exchange of induction channel furnace COMPEL (The International Journal for Computation and Mathematics in Electrical and Electronic Engineering), 2011, Vol. 30, No. 5, pp. 1637–1650	no
2011	S. Pavlovs, A. Jakovics, E. Baake, B. Nacke, M. Kirpo LES modeling of turbulent flow, heat exchange and particle transport in industrial induction channel furnaces Magnetohydrodynamics – 2011, vol. 47, Nr. 4, pp. 399 – 412.	no
2010	A. Jakovičs, S. Gendelis Energoefektīvā realitāte Latvijā Pārvaldnieks – 2010, Nr. 16, 20 – 23 lpp
2010	S. Gendelis, A. Jakovičs Mathematical modelling of a living-room with a solar radiation source Proceedings of the International forum-competition of young researchers "Topical Issues of Subsoil Usage". Working group "Energy saving and renewable energy", Volume II, pp. 186-188. April 21-23, 2010, St. Petersburg, Russia.
2010	M. Ščepanskis, A. Jakovičs, B. Nacke, E. Baake The Simulation of the Behaviour of the Alloying Admixture Particles in Induction Crucible Furnace In the Proceeding of the International Symposium on Heating by Electromagnetic Sources, Padua, Italy, pp. 3 - 10 (2010)
2010	M. Ščepanskis, A. Jakovičs, B. Nacke The Simulation of the motion of Solid Particles in the Turbulent Flow of Induction Crucible Furnaces In the Proceeding of the V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, Lisbon, Portugal (2010). 15 p. (CD).
2010	V. Geza, R. Milenkovic, S. Dementjev, R. Kapulla, A. Jakovics PIV Validation of Numerical Models for Turbulent Flows in a Water Test Section for Liquid Metal Target International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 279 - 284
2010	M. Ščepanskis, A. Jakovičs, B. Nacke Homogenization of Alloying Particles in Induction Crucible Furnaces International Scientific Colloquium "Modelling for Material Processing" Riga, September 16-17, 2010, pp. 259 - 264
2010	E. Baake, A. Jakovics, S. Pavlovs, M. Kirpo Numerical Analysis of Turbulent Flow and Temperature Field in Induction Channel Furnace with Various Channel Design International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 253 - 258
2010	S. Spitans, A. Jakovics, E. Baake, B. Nacke Numerical Modelling of Free Surface Dynamics of Melt in Induction Crucible Furnace (ICF) International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 247 – 252
2010	J. Grečenkovs, A. Jakovičs, S. Gendelis 3D Numerical Analysis of Heat Exchange in Building Structures with Cavities International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 163 - 168
2010	S. Spitans, A. Jakovics Turbulence Model Affect on Heat Exchange Characteristics Through the Beam Window for European Spallation Source International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 139 – 144
2010	S. Gendelis, A. Jakovičs Numerical Modelling of Airflow and Temperature Distribution in a Living Room with Different Heat Exchange Conditions Latvian Journal of Physics and Technical Sciences, Volume 47, Number 4 (2010), pp. 27 – 43 (DOI: 10.2478/v10047-010-0016-z)
2010	V. Geza, U. Krieger, A. Jakovics, B. Halbedel Influence of Material Properties on the Electromagnetic Homogenization of Glass Melt in the Special Melter International Scientific Colloquium "Modelling for Material Processing", Riga, September 16-17, 2010, pp. 115 – 120
2010	T.S. Lundstroem, V. Frishfelds, A. Jakovics Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry Composites: Part A: Applied science and manufacturing – 2010, vol. 41, pp. 83 – 92	no
2010	V. Frishfelds, T.S. Lundstroem, A. Jakovics Lattice gas analysis of liquid front in non-crimp fabrics Transport in porous media – 2010 19. pp. (published online 22.10.2009).	no
2010	E. Baake, A. Jakovics, M. Kirpo Influence of the channel design on the heat and mass exchange of induction channel furnace Heating by electromagnetic sources – Padova, May 2010, pp. 155 – 162	no
2010	S. Spitans, A. Jakovics Numerical modeling of turbulent flow in liquid metal target for European spallation source (ESS) Heating by Electromagnetic Sources – Padua, Italy, 18-21 May 2010, conference proceedings: 225-232 p.	no
2010	V. Geza, A. Jakovics, B. Halbedel, U. Krieger Optimisation of electromagnetic heating and mixing conditions in glass melt output equipment Heating by electromagnetic sources – Padova, May 2010, pp. 565 – 572	no
2010	A. Jakovics Preface International Scientific Colloquium "Modelling for Material Processing", Riga, Latvia, 2010, p. 13
2010	P. Mannberg, K. Giannadakis, A. Jakovics, J. Varna Moisture absorbtion and degradation of glass fiber/vinylester composites International Scientific Colloquium "Modelling for Material Processing", Riga, Latvia, 2010, pp. 157 - 162
2010	S. Johansson, V. Geza, L.G. Westerberg, A. Jakovics Characteristics of flow and temperature distribution in a ruthner process International Scientific Colloquium "Modelling for Material Processing" – Riga, Latvia, 2010, pp. 317 – 322
2010	B. Halbedel, U. Kreiger, V. Geza, A. Jakovics, R. Iser Elektromagnetische Stroemungsbeeinflussung in einer Spezialschmelzanlage – Prinzip, Auslegung und Ergebnisse Elektropprozesstechnik – Ilmenau, TU Ilmenau, Germany, 2010, 15 pp	no
2010	M. Ščepanskis and A. Jakovičs The Lagrangian particles in the EM driven turbulent flow with fine mesh (the treatment of solidParticle library in OpenFOAM) Open source CFD International conference – Munich, Germany, 2010, 10 pp. (CD)
2010	E. Baake, A. Jakovics, S. Pavlovs, M. Kirpo Long-term computations of turbulent flow and temperature field in the induction channel furnace with various channel design Magnetohydrodynamics – 2010, Vol. 46, Nr. 4, pp. 317–330	no
2010	M. Ščepanskis, A. Jakovičs, B. Nacke Homogenization of Non-conductive Particles in EM Induced Metal Flow in a Cylindrical Vessel Magnetohydrodynamics, 2010, vol. 46, No. 4, pp. 413 – 423	no
2010	S. Spitāns, A. Jakovičs, E. Baake, B. Nacke Numerical Modeling of Free Surface Dynamics of Conductive Melt in the Induction Crucible Furnace Magnetohydrodynamics, 46: 317-328
2010	V. Geza, A. Jakovics, U. Krieger, B. Halbedel Conditions of EM forced laminar mixing in a special glass melter Magnetohydrodynamics – 2010, Vol. 46, Nr. 4, pp. 449 - 460.	no
2009	A. Jakovics Laboratorium für mathematische Modellierung der Umwelt- und Technologieprozesse der Universität Lettlands Elektrowärme international – 2009, Nr. 1, S. 41 - 48.	no
2009	M. Kirpo, A. Jakovics, E. Baake, M. Langejürgen Simulation of heat and mass exchange in channel induction furnaces Progress in Computational heat and mass transfers – May 2009, Guangzhou, pp. 263 - 268.	no
2009	V. Geza, A. Jakovics, B. Halbedel, U. Krieger, U. Luedtke Electromagnetic processing of high-tech glasses in a spezial device – numerical investigations Information technology and electrical engineering – September 2009, Ilmenau, pp. 365 – 366.	no
2009	M. Kirpo, A. Jakovics, E. Baake, M. Langejürgen LES investigation of heat and mass exchange in channel induction furnaces Turbulence, heat and mass transfer 6 – Begell House, September 2009, Rome, pp. 1023 – 1026.	no
2009	D. Cepite, A. Jakovics Radiation heat transfer influence on EM and natural convection of the semi-transparent glass melt Electromagnetic processing of materials – Dresden, 2009, pp. 680 – 683	no
2009	A. Umbrashko, E. Baake, A. Jakovics, D. Ciscato Numerical investigation of TiAl meeting and solidification in induction furnace with cold crucible Electromagnetic processing of materials – Dresden, 2009, pp. 517 – 520	no
2009	A. Jakovics, M. Kirpo, B. Nacke, E. Baake Particle transport in the recirculated flows under EM convection Electromagnetic processing of materials – Dresden, 2009, pp. 553 – 556	no
2009	B. Niemann, B. Nacke, V. Geza, A. Jakovics Simulation of the 3D mass transfer of molten glasses in the inductor-crucible Electromagnetic processing of materials – Dresden, 2009, pp. 525 – 528	no
2009	E. Baake, M. Langejuergen, M. Kirpo, A. Jakovics Analysis and optimization of the heat and mass exchange in industrial induction channel furnaces using numerical modelling Electromagnetic processing of materials – Dresden, 2009, pp. 529 – 532	no
2009	V. Geza, A. Jakovics, B. Halbedel, U. Krieger Viscous low-conducting glass melt flow in output of glass processing system caused by two independent EM field sources Electromagnetic processing of materials – Dresden, 2009, pp. 537 – 540	no
2009	E. Baake, M. Langejuergen, M. Kirpo, A. Jakovics Analysis of transient heat and mass transfer processes in the melt of induction channel furnaces using LES Magnetohydrodymanics – 2009, Vol. 45, Nr. 3, pp. 385 -391.	no
2009	M. Kirpo, A. Jakovics, E. Baake, B. Nacke LES study of particle transport in turbulent recirculated liquid metal flows Magnetohydrodymanics – 2009, Vol. 45, Nr. 3, pp. 439 – 450.	no
2009	V. Frishfelds, A. Jakovics, B. Nacke, E. Baake Diffusion limited growth-up of channels of ICF and its influence on integral flow through channel Magnetohydrodymanics – 2009, Vol. 45, Nr. 4, pp. 639 – 646.	no
2009	D. Cepīte, A. Jakovics, B. Halbedel Modelling convective and radiative heat transfer in a glass melting model crucible Magnetohydrodymanics – 2009, Vol. 45, Nr. 4, pp. 609 – 614.	no
2009	V. Geza, A. Jakovics, B. Halbedel, U. Krieger Crossed EM fields driven weak conducting melt flow in an annular cylinder Magnetohydrodymanics – 2009, Vol. 45, Nr. 4, pp. 615 – 622.	no
2009	Павлов С., Якович А. (S. Pavlov, A. Jakovic) Multiphysics: многодисциплинарное моделирование металлургических магнитогидродинамических технологий. Эволюция моделей индукционной печи с холодным тиглем (Multidisciplinary modelling of metallurgical magnetohydrodynamic technologies. Evolution of models of induction furnaces with cold crucible) CAD/CAM/CAE Observer, 2009, № 3 (47), с. 61–69.
2008	S. Gendelis, A. Jakovičs Mathematical modelling of a living-room with solar radiation source and different boundary conditions Heat & Power and Thermal Physics. Vol.1, 2008, pp.73-81. ISSN 1691-5054.
2008	M. Langejürgen, M. Kirpo, A. Jakovics and E. Baake Numerical Simulation of Mass and Heat Transport in Induction Channel Furnaces Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 35 – 40.
2008	M. Kirpo, A. Jakovics, E. Baake and B. Nacke Particle transport in recirculated EM driven liquid metal flows Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 249 – 255
2008	M. Kirpo, A. Jakovics, E. Baake and B. Nacke LES Study of Particle Transport in Turbulent Recirculated Liquid Metal Flows Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 103 - 107	no
2008	E. Baake M. Langejurgen, M. Kirpo and A. Jakovics Analysis of Transient Heat and Mass Exchange in Induction Channel Furnaces Using LES Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 63 – 67.	no
2008	M. Kirpo, A. Jakovics, B. Nacke, E. Baake and M. Langejurgen LES of Heat and Mass Exchange in Induction Channel Furnaces PRZEGLAD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 84 NR 11/2008, pp. 154-158.
2008	M. Kirpo, A. Jakovics, B. Nacke, E. Baake, M. Langejuergen LES of heat and mass exchange in channel induction furnaces XVI International congress on electricity applications in modern world – Krakow, Poland, 2008, pp. 47 – 48.	no
2008	M. Kirpo, A. Jakovics, B. Nacke and E. Baake Particle transport in recirculated liquid metal flows COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 27(2), 2008, pp. 377-386.	no
2008	V. Frishfelds, T.S. Lundstroem, A. Jakovics Bubble motion through non-crimp fabrics during composites manufacturing Composites, part A: Applied science and manufacturing – 2008, vol. 39, Nr. 2, pp. 243 – 251	no
2008	T.S. Lundstroem, L.H. Gustavsson, N. Jekabsons, A. Jakovics Wetting dynamics in multiscale porous media. Porous pore-doublet model, experiment and theory AIChE Journal – 2008, vol. 54, Nr. 2, pp. 372 – 380	no
2008	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical studies of the melting process in the induction furnace with cold crucible The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) – 2008, vol. 27, Nr. 2, pp. 359 – 368	no
2008	D. Cepite, A. Jakovics, B. Halbedel, U. Krieger Modelling of EM glass convection The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) – 2008, vol. 27, Nr. 2, pp. 387 - 398	no
2008	D. Cepite, A. Jakovics Modelling of heat transfer through a material with the elliptic cavities Scientific Proceedings of RTU. Heat&Power and thermal physics – 2008, Vol. 1, pp. 75 - 84	no
2008	D. Cepīte, A. Jakovics, B. Halbedel Modelling the temperature homogeneity of the glass melt obtained by EM action XVI International congress on electricity applications in modern world – Krakow, Poland, 2008, pp. 63 - 64	no
2008	A. Jakovics, V. Geza, B. Halbedel Weak conducting material melt flow in crossed EM field XVI International congress on electricity applications in modern world – Krakow, Poland, 2008, pp. 99 – 100	no
2008	T.S. Lundstroem, V. Frishfelds, A. Jakovics Transport of bubbles in non-crimp fabrics during resin transfer moulding XV International conference “Mechanics of composite materials” - Riga, Latvia, 2008, pp. 171 – 172	no
2008	A. Umbrasko, E. Baake, B. Nacke, A. Jakovics Thermal and hydrodynamic analysis of the melting process in the cold crucible using 3D modelling Heat transfer research – 2008, vol. 39, Nr. 5, pp. 413 – 421	no
2008	D. Cepite, A. Jakovics Analysis of heat transfer in structure with regular arrangement of gas cavities Latvian Journal of physics and technical sciences – 2008, vol. 45, Nr. 4, pp. 14 - 24	no
2008	V. Frishfelds, T.S. Lundstroem, A. Jakovics Lattice-gas analysis of fluid front in non–crimp fabrics Proceedings of the 19-th International symposium on transport phenomena (ISTP-19) – Reykjavik, 2008, 8 pp	no
2008	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical investigations of metal flow and skull formation in cold crucible melting process Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 185 – 189	no
2008	D. Cepite, A. Jakovics, B. Halbedel, U. Krieger The contribution of radiation heat transfer in temperature distribution of EM driven semi-transparent glass melt flow Fundamental and applied MHD – Giens, France, 2008, vol. 1, pp. 191 – 195	no
2008	A. Jakovics, V. Geza, B. Halbedel Crossed EM fields driven weak conducting flow in annular cylinder Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 271 – 276	no
2008	D. Cepite, A. Jakovics, B. Halbedel Modelling convective and radiative heat transfer in a glass melting model crucible Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 285 – 290	no
2008	V. Frishfelds, A. Jakovics, B. Nacke, E. Baake Estimation of temperature difference and integral flow through channel of ICF Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 291 – 296	no
2008	V. Geza, A. Jakovics, K. Thomsen Heat exchange and operating gas flow influence on radiation resistant pressure sensor properties Modelling for electromagnetic processing – Hannover, Germany, 2008, pp. 297 – 302	no
2008	A. Jakovics, V. Geza, B. Halbedel Weak conducting material melt flow in crossed EM fields Przeglad elektrotechniczny – 2008, vol. 84, Nr. 11, pp. 175 – 179	no
2008	D. Cepīte, A. Jakovics, B. Halbedel Modelling the temperature homogenity of glass melt obtained by EM action Przeglad elektrotechniczny – 2008, vol. 84, Nr. 11, pp. 165 – 169	no
2008	A. Jakovičs Vai energoauditoriem jābūt gaišreģiem? Būvēt – 2008, Nr. 11, lpp. 50 – 53	no
2008	A Jakovics, E. Baake 5-th International scientific colloquium “Modelling for electromagnetic processing” in Hannover – Ein Rückblick Elektrowärme international - 2008, Nr. 4, pp. 269 -274	no
2007	D. Cepīte, A. Jakovičs, B. Halbedel, U. Krieger Modelling of the 3D Glass Melt Flow Driven by EM and Thermal Convection Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, vol. 2, pp. 112 – 121, Saint-Petersburg, Russia
2007	S. Gendelis, A. Jakovičs Influence of Solar Radiation and Ventilation Conditions on Heat Balance and Thermal Comfort Conditions in Living-Rooms Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, Saint-Petersburg, Russia, vol. 2, p. 634 – 643.
2007	M. Kirpo, A. Jakovičs, B. Nacke, E. Baake, M. Langejurgen Heat and Mass Transfer in a Recirculated Flow under EM Convection Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, vol. 2, pp. 380 – 389, Saint-Petersburg, Russia
2007	A. Umbrasko, E. Baake, B. Nacke, A. Jakovičs Thermal and Hydrodynamic Analysis of the Melting Process in the Cold Crucible Using 3D modeling Advances in Heat Transfer. Proceeding of the 5th Baltic Heat Transfer Conference. September 19-21, 2007, Saint-Petersburg, Russia
2007	S. Gendelis, A. Jakovičs Mathematical Modelling of a Living Room with Solar Radiation Source and Different Boundary Conditions Proceedings of the WSEAS Int. conference – Arcachon, France, 2007, p. 168 – 173.
2007	V. Frishfelds, A. Jakovics, S. Lundsröm Automatic recognition and analysis of scanned non-crimp fabrics for calculation of their fluid flow permeability Journal of reinforced plastics and composites – 2007, Vol. 26, Nr. 3, p. 285 - 296.	no
2007	D. Cepīte, A. Jakovics, B. Halbedel, U. Krieger Modelling of EM glass convection with temperature dependent properties of the melt Induction, dielectric, conduction and elektromagnetic processing – Padua, 2007, pp. 25 – 32.	no
2007	M. Kirpo, A. Jakovics, B. Nacke, E. Baake Particle transport in recirculated liquid metal flows Induction, dielectric, conduction and electromagnetic processing – Padua, 2007, pp. 153 – 160.	no
2007	V. Frishfelds, A. Jakovics, B. Nacke Influence of crust and hole formation on inductive melting of circon in inductor crucible Induction, dielectric, conduction and electromagnetic processing – Padua, 2007, pp. 167 – 172.	no
2007	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical studies of the melting process in the induction furnace with cold crucible Induction, dielectric, conduction and electromagnetic processing – Padua, 2007, pp. 277 - 284.	no
2007	A. Jakovics. M. Kirpo, B. Nacke LES of particle tracking in a induction crucible 6-th international conference on multiphase flow (ICMF 2007) – Leipzig, 2007, p. 186 and 10 p. in CD	no
2007	M. Kirpo, A. Jakovics, E. Baake, B. Nacke Analysis of experimental and simulation data for the liquid metal flow in a cylindrical vessel Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 161 – 172.	no
2007	D. Cepite, A. Jakovics, B. Halbedel, U. Krieger Modelling of electromagnetic glass convection with temperature-dependent properties of the melt Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 195 – 204.	no
2007	V. Frishfelds, A. Jakovics, B. Nacke Simulation of the melting process of ZrO2-SiO2 in an inductor crucible Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 213 - 220.	no
2007	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical modelling of recirculated liquid metal flows in induction furnaces with cold crucible Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 243 - 252.	no
2007	A. Jakovics Preface Magnetohydrodynamics – 2007, Vol. 43, No. 2, p. 149 – 150.	no
2007	E. Baake, A. Umbrashko, B. Nacke, A. Jakovics Simulation of turbulent melt flows GAMM-Mitteilungen – Wiley-VCH, 2007, Bd. 30, Nr. 1, pp. 133 – 148.	no
2007	A. Jakovics, D. Cepīte, B. Halbedel, U. Krieger Modelling the electromagnetically- driven stirring process of glass melt Induktive Verfahren und elektromagnetische Schmelzenbeeinflussung – Ilmenau, 2007, pp. 13.1 – 13.8.	no
2007	M. Langenjuergen, B. Nacke, E. Baake, M. Kirpo, A. Jakovics Simulation des Wärme- und Stofftransports in Induktions-Rinnenöfen mittels Large Eddy Simulation (LES) Induktive Verfahren und elektromagnetische Schmelzenbeeinflussung – Ilmenau, 2007, pp. 11.1 – 11.8.	no
2007	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics, M. Kirpo Analysis of the effectiveness of the melting process in the cold crucible using 3D modelling Liquid metal processing and casting – Nancy, France, 2007, p. 273 – 277.	no
2007	E. Baake, A. Umbrashko, A. Jakovics Numerical simulation of turbulent flows, heat and mass transfer in metallurgical induction processes Steel research international. – 2007, vol. 78, Nr. 5, pp. 413 – 418.	no
2006	A. Timuhins, S. Gendelis, A. Jakovičs Experimental Estimation of Thermophysical Properties of Materials Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 227-232, ISBN 9984-783-85-5
2006	M. Kirpo, A. Jakovics, E. Baake and B. Nacke Modeling velocity pulsations in a turbulent recirculated melt flow Magentohydrodynamics, Vol. 42, No. 2-3, 207-218, 2006
2006	M. Kirpo, A. Jakovics, E. Baake and B. Nacke LES modelling of recirculated flows in crucible furnaces Turbulence, heat and mass transfer – Dubrovnik, 2006, p. 797 – 800
2006	S. Gendelis, A. Jakovičs Mathematical Modelling of Living Room with Different Type of Heating Proceedings of the 4th WSEAS International Conference on HEAT TRANSFER, THERMAL ENGINEERING and ENVIRONMENT, Elounda, Greece, August 21-23, 2006 (pp. 248-253)
2006	S. Gendelis, A. Jakovičs Mathematical Modelling of Living Room with Different Types of Heating and Pressure Conditions WSEAS TRANSACTIONS ON HEAT AND MASS TRANSFER Issue 3, Vol. 1, March 2006, ISSN: 1790-5044
2006	M. Kirpo, A. Jakovics, E. Baake, B. Nacke Analysis of Experimental and Simulation Data for Liquid Metal Flow in a Cylindrical Container Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 36-41, ISBN 9984-783-85-5
2006	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Numerical Modelling of Recirculated Liquid Metals Flows in Practical Applications Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 56-61, ISBN 9984-783-85-5
2006	V. Frishfelds, A. Jakovics, A. Muehlbauer, B. Nacke Dynamics of Incongruent Melting of ZrO2-SiO2 in Inductor Crucible Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 149-154, ISBN 9984-783-85-5
2006	D. Cepite, A. Jakovics, K. Repsons, B. Halbedel 2D Modelling of EM Glass Convection by Temperature Dependent Material Properties Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing' - Rīga, Latvia, 2006, pp. 161-166, ISBN 9984-783-85-5
2006	M. Nordlund, T.S. Lundstroem, V. Frishfelds, A. Jakovics Permeability network model of non-crimp fabrics Composites, part A: applied sciences and manufacturing – Vol. 37, 2006, p. 826 – 835	no
2006	(Editors A. Jakovics, J. Virbulis) Modelling for material processing University of Latvia, Riga, 2006, 258 p.	no
2006	A. Jakovics, M. Kirpo, B. Nacke LES modelling of turbulent structure and mass transfer processes in induction furnaces Proceedings of 51. IWK – Ilmenau, 2006, p. 457 -458. (CD - 8 p.)	no
2006	E. Baake, A. Umbrashko, A. Jakovics Modelling of the turbulent melt flow in metallurgical processes Proceedings of 51. IWK – Ilmenau, 2006, p. 461-446 (CD - 8 p.)	no
2006	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Modeling of the turbulent flow in induction furnaces Metallurgical and materials transaction B – 2006, vol. 37B, p. 831 – 838	no
2006	B. Nacke, M. Kirpo, A. Jakovics LES study of flow characteristics in induction furnaces Electromagnetic processing of materials – Sendai, 2006, p. 541 – 546	no
2006	E. Baake, A. Umbrashko, H. Behrens, A. Jakovics LES-Modelling of turbulent flows, heat and mass transfer in industrial induction applications Electromagnetic processing of materials – Sendai, 2006, p. 214 – 219	no
2006	A. Jakovics, E. Baake Bericht vom 4-th International scientific colloquium “Modelling for material processing” Elektrowaerme international – 2006, Nr. 3, S. 184 – 187	no
2005	S. Gendelis, A. Jakovičs Applications of 3D mathematical models for improvement of thermal comfort conditions in living rooms Latvian Journal of Physics and Technical Sciences, 2005 No.4, pp. 40-52, ISSN 0868-8257
2005	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Experimental investigations and numerical modelling of the melting process in the cold crucible The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) – 2005, Vol. 24, Nr. 1 pp. 314-323
2005	V. Frishfelds, S. Lundsröm, A. Jakovics Automatic recognition and analysis of scanned non-crimp fabrics for calculation of their fluid flow permeability Pattern Analysis and Application – 2005, in print	no
2005	S. Gendelis, A. Jakovičs, I. Javaitis, K. Ērglis, K. Repsons Modelling of heat transfer, temperature and humidity distribution in building structures Proceedings of international scientific conference 'Civil Engineering '05'. Section 'Environment and Environmental Effects' - Jelgava, Latvia, 2005, pp.156 -164., ISBN 9984-19-745-X
2005	I. Javaitis, K. Ērglis, A, Jakovičs Determination of heat conductivity of materials by guarded hot plate method Proceedings of international scientific conference 'Civil Engineering '05'. Section 'Environment and Environmental Effects' - Jelgava, Latvia, 2005, pp.174 -1180., ISBN 9984-19-745-X	no
2005	S. Gendelis, A. Jakovičs Heat transfer measurements in non-stationary conditions for building structures 14th International Conference on Thermal Engineering and Thermogrammetry (THERMO), 22-24 June, 2005, Budapest, Hungary, p. 69 (CD – 6 p.)
2005	S. Gendelis, A. Jakovičs Mathematical modelling of airflow and temperature distribution in living rooms 14th International Conference on Thermal Engineering and Thermogrammetry (THERMO), 22-24 June, 2005, Budapest, Hungary, p. 68 (CD – 6 p.)
2005	S. Gendelis, A. Jakovičs Application oh Mathematical Models for the Simulation of the Thermal Comfort Conditions in a living room Proceedings of the 5th Internatonal scientific conference ”Environment, technology, resources” – Rēzekne, 2005, pp. 11 – 18
2005	M. Kirpo, A. Jakovics, A. Umbrashko, E. Baake, B. Nacke Simulation of low-frequency velocity oscillations in turbulent recirculated MHD flows Actual problems of induction heating (APIH-05) – St. Petersburg, 2005, pp. 145 – 152.	no
2005	M. Kirpo, A. Jakovics, E. Baake, B. Nacke Modelling velocity pulsations in a turbulent recirculated melt flow Fundamental und applied MHD – Riga, 2005, vol. 1, pp. 171 – 174.	no
2005	A. Jakovics, I. Javaitis, B. Nacke, E. Baake Simulation of melting process in cold and inductor crucible Fundamental und applied MHD – Riga, 2005, vol. 2, pp. 15 – 18.	no
2005	A. Umbrashko, E. Baake, B. Nacke, M. Kirpo, A. Jakovics Improvement of the cold crucible melting process using LES modelling Fundamental und applied MHD – Riga, 2005, vol. 2, pp. 23 – 26	no
2005	B. Nacke, T. Behrens, M. Kudryash, A. Jakovics Skull melting technology for oxides and glasses Fundamental und applied MHD – Riga, 2005, vol. 2, pp. 241 – 244.	no
2005	E. Baake, A. Umbrashko, A. Jakovics Numerical modelling of metallurgical processes using LES International conference on research in elektrotechnology and applied informatics – Katowice-Krakow, 2005, pp. 91 – 98.	no
2005	M. Kirpo, A. Jakovičs, E. Baake Characteristics of velocity pulsations in a turbulent recirculated melt flow Magnetohydrodynamics Vol. 41 (2005), No. 2, pp. 199–210
2005	I. Javaitis, K. Erglis, A. Jakovics Determination of heat conductivity of materials by the guarded hot plate method Latvian Journal of physics and technical sciences – 2005, Nr. 4, pp. 29 – 39	no
2005	E. Baake, A. Umbrashko, B. Nacke, A. Jakovics Simulation of turbulent melt flows GAMM Mitteilungen – 2005, 16 pp.	no
2005	E. Baake, A. Umbrashko, A. Jakovics LES modelling of the cold crucible melting processes Electromagnetic processing of materials (2-nd Sino-German workshop) – October 16-19, 2005	no
2005	A. Jakovics, M. Kirpo, B. Nacke Particle tracing and crystallization in cold crucible furnace Liquid metals and semiconductors (COST action P17 “EPM”) – December 7-8, 2005.	no
2004	S. Gendelis, A. Jakovičs Numerical modelling of hydraulic resistance in pipes of various shapes International Conference 'Scientific Achievements for wellbeing and development of society'. Section 'Enabling environment for society wellbeing' – Rēzekne, Latvia, 2004, pp. 84-91, ISBN 9984-585-46-8
2004	S. Gendelis, A. Jakovičs Complex analysis of heat losses for buildings International Conference 'Scientific Achievements for wellbeing and development of society'. Section 'Enabling environment for society wellbeing' - Rēzekne, Latvia, 2004, pp. 76 - 83., ISBN 9984-585-46-8
2004	S. Gendelis, A. Jakovičs Ēku siltuma zudumu kompleksa analīze Enerģētika un automatizācija - 2004, Nr. 1 (26), lpp. 42-46
2004	S. Gendelis, A. Jakovičs Numerical modelling of hydraulic resistance in pipes of different geometric shapes Latvian Journal of physics and technical sciences - 2004, Nr. 4, pp. 13 - 27., ISSN 0868-8257
2004	V. Frishfelds, S. Lundstroem, A. Jakovics A statistical approach to permeability of clustered fibre reinforcements Journal of composite materials – 2004, Vol. 38, Nr. 13, pp. 1137 - 1149	no
2004	V. Frishfelds, A. Jakovics, B. Nacke Two-fluid model of melting dynamics of metals in cold crucible Heating by electromagnetic sources (HES-04) – Padua, 2004, pp. 405 – 412
2004	V. Frishfelds, A. Jakovics, B. Nacke Study of melting dynamics of oxides in inductor crucible Heating by electromagnetic sources (HES-04) – Padua, 2004, pp. 157 – 164
2004	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics Experimental investigations and numerical modelling of the melting process in the cold crucible Heating by electromagnetic sources (HES-04) – Padua, 2004, pp. 31 – 37	no
2004	A. Jakovics, V. Frishfelds, B. Nacke, T. Behrens Simulation der Schmelzdynamik von Oxiden im Induktor-Schmelztiegel Erwärmen und Schmelzen mit elektrotechnischen und alternativen Verfahren. Ilmenau, 2004, 10 S.
2004	M. Nordlund, T.S. Lundström, V. Frishfelds, A. Jakovics Application of permeability network model to non-crimp fabrics FPCM-7
2003	E. Baake, Nacke B., A. Umbrashko, A. Jakovics LES modelling of heat and mass transfer in turbulent recirculated flows Magnetohydrodynamics - 2003, Vol. 39, Nr. 3-4.
2003	V. Frishfelds, S. Lundstrom, A. Jakovics Permeability of clustered fibre networks: modelling of unit cell Mechanics of composite materials - 2003, Vol. 39, Nr. 3, pp 265 - 272.
2003	S. Gendels, A. Jakovičs Ēku siltuma zudumu analīze, izmantojot matemātiskos modeļus IV Starptautiskā zinātniski praktiskā konference 'Vide. Tehnoloģija. Resursi' - Rēzekne, 2003., lpp. 247-352., ISBN 9984-585-68-9
2003	S. Gendels, A. Jakovičs Numerical modelling of airflow and temperature distribution in heated rooms Latvian journal of physics and technical sciences - 2003, Nr. 3, pp. 3 - 20., ISSN 0868-8257
2003	A. Jakovičs, A. Umbraško, E. Baake Turbulento pārneses procesu Izpēte, lietojot lielo virpuļu modeli (LES) Latvijas fizikas biedrības 8. Konferences materiāli - Jelgava, 2003, lpp. 39 - 45.	no
2003	V. Frišfelds, A. Jakovičs, B. Nacke Augsttemperatūru oksīdu kausēšanas procesu induktortīģelī modelēšana Latvijas fizikas biedrības 8. Konferences materiāli - Jelgava, 2003, lpp. 34 - 38.	no
2003	V. Frishfelds, A. Jakovics, B. Nacke Modelling of key factors in melting of oxides in inductor crucible Electromagnetic processing of materials - Lyon, 2003, 6 pp.	no
2003	E. Baake, A. Umbrashko, B. Nacke, A. Jakovics, A. Bojarevics Experimental investigations and LES modelling of the turbulent melt flow and temperature distribution in the cold crucible induction furnace Electromagnetic processing of materials - Lyon, 2003, 6 pp.	no
2003	E. Baake, A. Umbrashko, A. Jakovics, B. Nacke Experimentelle Untersuchung und LES Modellierung der Schmelzenströmung und Temperaturverteilung im Kaltwand-Induktions-Tiegelofen 48. Int. wissenschaftliches Kolloquium TU Ilmenau, 22. - 25. September – Ilmenau, 2003, 8 S	no
2003	A. Jakovics, J. Kaupuzs, B. Nacke Stability conditions of the build-up formation on the surface of refractory Magnetohydrodynamics - 2003, Vol. 39, Nr. 3-4	no
2003	V. Frishfelds, B. Niemeyer, J. Hoehne, A. Jakovics Modeling of PAH elimination by adiabatic steam stripping and intraparticle desorption Engineering in life science - 2003, Nr. 5, pp. 226 - 232.	no
2003	A. Jakovics, E. Baake, A. Umbrashko Simulation von Schmelzenströmungen für industrielle Anwendungen Elektrowärme international - 2003, Nr. 1, S. 21 - 23.	no
2003	J. Kaupuzs, V. Frishfelds, A. Jakovics, B. Nacke Influence of melt flow and temperature on erosion of refractory and deposit formation in induction furnaces Modelling for electromagnetic processing - Hannover, 2003, lpp. 279 - 284.	no
2003	N. Jekabsons, A. Jakovics, B. Nacke Modell of protective (skull) layer in the inductor-crucible furnace Modelling for electromagnetic processing - Hannover, 2003, lpp. 261 - 266.	no
2003	V. Frishfelds, B. Nacke, A. Jakovics Simulation of inductive melting process of oxides in inductor-crucible Modelling for electromagnetic processing - Hannover, 2003, lpp. 157 - 162.	no
2003	A. Umbrashko, E. Baake, B. Nacke, A. Jakovics LES modelling and experimental investigation of the melt flow in induction furnaces Modelling for electromagnetic processing - Hannover, 2003, lpp. 111 - 116.	no
2003	E. Baake, B. Nacke, A. Umbrashko, A. Jakovics Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces The international journal for computation and mathematics in electrical and electronic engineering (COMPEL) - 2003, Vol. 22, Nr. 1, lpp. 39 - 47.	no
2003	S. Gendelis, A. Jakovics Application of mathematical models in analysis of heat losses in the buildings Environment, technology and resources - Rēzekne, 2003, pp. 347 – 352	no
2003	A. Jakovics, E. Baake Bericht vom International scientific colloquium “Modelling for electromagnetic processing” in Hannover Elektrowärme international – 2003, Nr. 2, S. 71 – 74.	no
2002	A. Jakovičs, B. Nacke, V. Frišfelds, I. Madžulis Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces Energy transfer and management - 2002, Vol. 43, pp. 345 - 352.
2002	E. Baake, Nacke B., A. Umbraško, A. Jakovičs LES modelling of heat and mass transfer in turbulent recirculated flows Fundamental and applied MHD - Ramatuelle, 2002, Vol. 2, pp. 173-178.
2002	A. Jakovičs, J. Kaupužs, B. Nacke Stability conditions of the build-up formation on the surface of refractory Fundamental and applied MHD - Ramatuelle, 2002, Vol. 2, pp. 113-118.
2002	B. Nacke, V. Frišfelds, A. Jakovičs Stability conditions in inductive melting of oxides in inductor crucible furnace Fundamental and applied MHD - Ramatuelle, 2002, Vol. 2, pp. 47-52.
2002	J. Kaupužs, A. Jakovičs Stability conditions at the build-up formation on the surface of a refractory Latvian journal of physics and technical sciences - 2002, Nr. 3, pp. 62 - 70.
2002	B. Nacke, V. Frisfelds, A. Jakovičs Modeling of inductive melting of oxides in inductor crucible furnace Elektrowarme international - 2002, Nr. 3, pp. 105 - 109.
2002	(Redaktors A. Jakovičs) Ēku norobežojošo konstrukciju siltumtehnika II Latvijas Universitāte, Rīga, 2002, 206 lpp.	no
2002	S. Gendelis, A. Jakovičs Ēku blīvējuma pakāpes mērījumi - zemspiediena un pārspiediena testi Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika II' - Rīga, 2002	no
2002	A. Jakovičs, H. Trimmans Ēku siltuma zudumu koeficienta aprēķins un apkures siltuma patēriņa modelēšana Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika II' - Rīga, 2002	no
2002	A. Jakovičs, S. Gendelis Būvkonstrukciju siltuma caurlaidības noteikšana reālos ēku ekspluatācijas apstākļos Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika II' - Rīga, 2002	no
2002	E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces Journal for computation and mathematics in electrical and electronic engineering (COMPEL) - 2002	no
2002	A. Jakovičs Būvkonstrukciju energoefektivitāte Latvijā - laikmetu griežos Enerģētika un automatizācija - 2002, Nr. 5, lpp. 26 - 30.	no
2002	V. Frishfelds, A. Jakovics, L. He, B. Niemeyer Adjustment of process parameters by modeling of selective separations Innovative Methoden zur Erfassung und Verminderung von umweltbelastenden Geruchsemissionen aus Landwirtschaft und Lebensmittelindustrie. - Hamburg, 2002, p. 85 - 91.	no
2002	A. Jakovics Laboratorium fur mathematische Modellierung der Umwelt- und Technologieprozesse der Universitat Lettlands Elektrowarme international - 2002, Nr. 4, S. 143 - 148.	no
2001	E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces Heating by internal sources – Padova, 2001, pp. 47 – 53.
2001	(Editor A. Jakovičs ) Proceedings of the International Scientific Colloquium "Modelling for saving resources" University of Latvia, Riga, 2001, 224 pp.
2001	A. Jakovičs, M. Kirpo , A. Veispals, B. Nacke, E. Baake Measurement of the electrical conductivity of zircon at high temperatures International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 135-141.
2001	E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Transient 3D simulation of recirculated melt flow International scientific colloquium 'Modelling for saving saving resources' – Riga, 2001, pp. 129-134.
2001	V. Frišfelds, A. Jakovičs , I. Madžulis, B. Niemeyer Mutual diffusion of components in liquid PAH-water system in mean field approximation International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 107-112.
2001	A. Jakovičs, V. Frišfelds , J. Hoehne, B. Niemeyer, A. Eschenbach Adiabatic steam stripping of PAH contaminated droplets in reactor tube International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 94-99.
2001	A. Jakovičs, S. Gendels , H. Truemmann Modelling of air fluxes and temperature distribution in heated rooms International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 170-176.
2001	A. Jakovičs, S. Gendels , H. Truemmann Analysis of heat losses from typical buildings in Riga International scientific colloquium 'Modelling for saving resources' – Riga, 2001, pp. 190-197.
2001	E. Baake, B. Nacke, A. Jakovičs, A. Umbraško Heat and mass transfer in turbulent flows with several recirculated flow eddies Magnetohydrodynamics – 2001, Vol. 37, Nr. 1-2, pp. 13-22.
2001	A. Jakovičs, V. Frišfelds, B. Niemeyer, J. Hoehne Modelling of adiabatic steam stripping of PAH-water binary mixture in mean field approximation Latvian Journal of physics and technical sciences - 2001, Nr. 6, pp. 3 - 13.
2001	E. Baake, B. Nacke, A. Umbraško, A. Jakovičs Dreidimensionale instationäre Untersuchungen der turbulenten Schmelzenströmung in Induktionsöfen Elektromagnetische Verfahrenstechniken. – Ilmenau, 001, 8 S.	no
2001	A. Jakovičs , E. Baake Bericht vom International Scientific Colloquium 'Modelling for saving resources' in Riga, Lettland Elektrowärme international – 2001, Nr. 3, S. 111 - 113.	no
2001	A. Jakovičs, S. Gendelis System of inspection of heat losses in structures of existing buildings in Latvia International conference 'Requirements to energy consumption level in buildings of the Baltic region' - Kaunas, 2001, pp. 105 – 114.	no
2000	I. Madžulis, A. Jakovičs, V. Frišfelds, B. Nacke Zinc Accumulation in Refractory Material in Strongly Inhomogeneous Temperature Field Latvian Journal of Physics and Technical Sciences, 2000, pp. 3 - 12.
2000	A. Jakovičs, S. Gendelis, Z. Krievāns Ēku siltuma zudumu un apkures vajadzības datormodelēšana Latvian Journal of Physics And Technical Sciences - 2000, Nr 3, lpp. 3 – 18.
2000	A. Jakovičs, B. Nacke, I. Madzhulis, V. Frišfelds Influence of melt Flow and Temperature on Erosion of Refractory and Deposit Formation in Aluminium Melting Furnaces 4th International Conference MHD at dawn of 3rd Millenium, Giens, France, September 18-22, 2000	no
2000	A. Jakovičs, S. Gendelis, H. Trimmans Ēku siltuma zudumu un apkures siltuma patēriņa modelēšana Zinātniski-praktiskais seminārs 'Eku norobežojošo konstrukciju siltumtehnika' - Rīga, 2000, lpp. 24.1 - 24.15.	no
2000	A. Jakovičs, S. Gendelis, Z. Krievāns Būvkonstrukciju siltuma caurlaidības noteikšana reālos ēku ekspluatācijas apstākļos Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika' - Rīga, 2000, lpp. 12.1 - 12.9.	no
2000	A. Jakovičs, L. Šnīdere, V. Krūmiņš, S. Gendelis Gatavo būvizstrādājumu siltuma caurlaidības testēšanas iespējas Latvijā Zinātniski-praktiskais seminārs 'Ēku norobežojošo konstrukciju siltumtehnika' - Rīga, 2000, lpp. 16.1 - 16.9.	no
2000	A. Jakovičs, J. Ozoliņš, V. Krūmiņš Logi ne tikai skaistumam, jeb par ko maksāsim XXI gadsimā?? Logi un durvis. -2000, Nr. 1, lpp. 41 – 49.	no
2000	A. Jakovičs, J. Ozoliņš, V. Melnstrazds Siltums mūsu mājokļos, jeb ko lāpīsim, kā šūsim jaunu Būvēt. - 2000, Nr. 4, lpp. 58 - 65.	no
2000	A. Jakovičs, V. Krūmiņš, A. Banga Acis mūsu pilsētas sejā (jeb vai logi ir tikai skaistumam?) Būvēt. - 2000, Nr. 5, lpp. 38 – 43.	no
2000	E. Baake, A. Jakovičs, B. Nacke, A. Umbraško Heat and mass transfer in turbulent flows with several recirculated flow eddies 4th International PAMIR MHD conference. Giens, France, September 18-24, 2000	no
2000	E. Baake, B. Nacke, E. Dötsch, A. Umbraško, A. Jakovičs Wärme- und Stofftransport in der Schmelze von Tiegelinduktoröfen Induktionserwärmung – Ilmenau, 2000, 8 S.	no
2000	A. Jakovičs , B. Nacke, I. Madžulis, V. Frišfelds Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces MHD at dawn of 3-rd Millennium (4-th international conference) – Presqu’ile de Giens, 2000, pp. 851 – 856.	no
1999	V. Frišfelds, A. Jakovičs, I. Madžulis Interaction between unstationary temperature gradient and diffusion of metal vapour in porous material	no
1999	A. Jakovičs, L. Snidere, S. Gendelis Bestimmung des Wärmedurchgangs – koefitzienten von Bauelementen in existierenden Gebäuden und in der Thermokammer Maschinenbau im Informationszeitalter. - Ilmenau, 1999, S. 239 - 243.	no
1999	A. Jakovičs, S. Gendelis, Z. Krievāns Determination of the heat transfer coefficient of construction elements for existing buildings International scientific conference 'Progress in Engineering Heat Transfer' – Gdansk, 1999, pp. 145 - 152.	no
1999	A. Jakovics, L. Shnidere, S. Gendelis, V. Krumins Standardised measurement of heat transfer coefficient of finished building structures in the heat chamber Modelling of material processing. – Riga, 1999, pp. 168 – 173.	no
1999	A. Jakovičs, S. Gendelis, H. Truemmann, J. Virbulis Combined applications of thermography, heat transfer measurement and heat consumption modelling in the reconstruction of buildings Modelling of material processing. – Riga, 1999, pp. 158 – 167.	no
1999	A. Jakovičs, I. Madžulis, V. Frišfelds, B. Nacke Change of conductivity of fireproof material by metal vapor in presence of temperature gradient Modelling of material processing. – Riga, 1999, pp. 116 – 123.	no
1998	A. Jakovičs, H. Trümann, A. Banga, A. Mühlbauer Einsatz der Gebäude – thermographie zur Diagnostik der Wärmedämmung an osteuropäischen Hochbauten Elektrowärme international A. – 1998, Nr. 3, S. 93-102.	no
1998	A. Jakovičs, I. Madžulis, V. Frišfelds, B. Nacke Auswirkungen der Temperatur auf die Diffusion der Zinkdämpfe im feuerfesten Material 43. Internationales wissenschaftliches Kolloquium, Band 3. – Ilmenau, 1998, S. 720 – 725.	no
1998	I. Madžulis, A. Jakovičs, V. Frišfelds, B. Nacke Diffusion of metal vapour in porous material in strongly inhomogeneous temperature field Latvian Journal of Physics and Technical sciences. – 1998, Nr. 4, pp. 39 – 51.	no
1998	A. Mühlbauer, A. Jakovičs, J. Virbulis, E. Westphal Transfer processes in the manufacturing of single silicon crystals and high temperature alloys by increasing flow intensity	no
1997	A. Jakovičs, N. Jekabsons, A. Mühlbauer, H. Trümmann Bestimmung des effektiven Wärmedurchgangskoeffizienten von Bauelementen unter praxisnahen Bedingungen Elektrowärme international A. - 1997, Nr. A2, S. 77 - 83.	no
1997	A. Jakovičs, N. Jekabsons, J. Virbulis Determination of the effective heat transfer coefficient in the elements of existing buildings Latvian Journal of Physics and Technical Sciences. - 1997, Nr. 2, pp. 71 - 83.	no
1997	A. Jakovičs, A. Banga Kad siltums kļūst redzams Zvaigžņotā debess. - 1997, Vol. 156, pp. 17 – 22, 40.	no
1997	A. Jakovičs, A. Mühlbauer Transfer processes of the high temperature alloys in the induction furnaces with cold crucible. Transfer phenomena in magnetohydrodynamic and electroconducting flows Grenoble, 1997, Vol. 2, pp. 469 – 474.	no
1996	R. Drewek, A. Jakovičs, A. Mühlbauer, B. Nacke Experimental and numerical investigations of the melt flow in channel-induction furnaces Magnetohydrodynamics. - 1996, Vol. 32, Nr. 4, pp. 433 - 442.	no
1996	N. Jekabsons, A. Jakovičs, B. Nacke Gekoppelte Modellierung des Temperatur- und Metallkonzentrationfeldes in der Feuerfestauskleidung Computeranwendung in der Elektrowärmetechnik. - Ilmenau, 1996, 8 S.	no
1995	E. Baake, A. Jakovičs, A. Mühlbauer Turbulence and low-frequency oscillations in the thoroidal electromagnetically induced vortical melt flow 14th International conference on magnetohydrodynamics. - Riga, 1995, 1 p.	no
1995	J. Virbulis, A. Mühlbauer, A. Jakovičs Effect of inductor shape on the shape of interfaces and melt convection in floating zone silicon crystal growth 14th International conference on magnetohydrodynamics. - Riga, 1995, 1 p.	no
1995	R. Drewek, A. Jakovičs, A. Mühlbauer, B. Nacke Experimental and numerical investigations on the melt flow in channel-induction furnaces 14th International conference on magnetohydrodynamics. - Riga, 1995, 1 p.	no
1995	J. Virbulis, A. Mühlbauer, A. Jakovičs Numerical modeling of the float zone silicon crystal growth 10th Conference on the computation of electromagnetic fields 'Compumag'. - Berlin, 1995, pp. 606 - 607.	no
1995	E. Baake, A. Jakovich, A. Mühlbauer, W. Andree Extension of the k-e model for the numerical simulation of the melt flow in induction crucible furnaces Metallurgical and materials transactions B. - 1995, Vol. 26B, pp. 529 - 536.	no
1995	U. Bethers, A. Jakovičs, N. Jekabsons, I. Madžulis, B. Nacke, A. Mühlbauer Influence of the temperature distribution of the build-up formation in the induction channel furnaces Advances in engineering heat transfer. - Sauthampton/Boston, 1995, pp. 433 - 442.	no
1995	U. Bethers, A. Jakovičs, N. Jēkabsons, I. Madžulis, B. Nacke Deposit formation and clogging in induction channel furnaces 40th International scientific colloquium. - Ilmenau, 1995, S. 31 - 36.	no
1995	N. Jekabsons, A. Jakovičs, B. Nacke Infiltration von Zink in feuerfester Zustellung von Induktions-Rinnenöfen 40th International scientific colloquium. - Ilmenau, 1995, S. 54 - 59.	no
1995	A. Jakovičs Aus der Geschichte der wissenschaftlichen Zusammenarbeit. 10 Jahre der wissenschaftlichen Zusammenarbeit (1986 - 1995) Riga/Hannover, 1995, S. 4 -6.	no
1995	U. Bethers, A. Jakovičs, N. Jēkabsons, I. Madžulis, B. Nacke Modelling of the deposit formation in channel-type induction furnaces Magnetohydrodynamics. - 1995, Vol. 31, Nr. 3-4, pp. 307 - 315.	no
1990	Никифорова Н.В., Павлов С.И., Тир Л.Л., Якович А.Т. Численное исследование циркуляции расплава в индукционной печи с разрезным проводящим тиглем с использованием модели меридионального сечения Магнитная гидродинамика, 1990, № 2, с. 92–98.	no
1989	Бетхерс У.А., Муйжниекс А.Р., Никифорова Н.В., Павлов С.И., Тир Л.Л., Якович А.Т. Численное моделирование электромагнитного поля в меридиональном сечении индукционной печи с разрезным проводящем тиглем Известия АН ЛатвССР (серия физических и технических наук), 1989, № 1, с. 81–88.
1989	Никифорова Н.В., Павлов С.И., Якович А.Т. Численное исследование влияния числа секций холодного тигля и частоты тока индуктора на электромагнитные поля в индукционной печи Известия АН ЛатвССР (серия фи¬зических и технических наук), 1989, № 3, С. 109–115.
1981	Павлов С.И., Якович А.Т. Влияние мениска на циркуляцию расплава в индукционной электропечи Магнитная гидродинамика – 1981, № 3, с. 104–109.	no
1980	Микельсон Ю.Я., Павлов С.И., Якович А.Т. Численное моделирование МГД-течения в области произвольной осесимметричной конфигурации Магнитная гидродинамика – 1980, № 3, с. 73–80.	no
1978	Микельсон Ю.Я., Якович А.Т., Павлов С.И. Численное исследование осреднённого МГД-течения в цилиндрической области с использованием рабочих гипотез для турбулентных напряжений Магнитная гидродинамика – 1978, № 1, с. 51–58.	no